Gigabyte motherboard GA-C1037UN-EU
I have a fresh install of 6.1 to give me the following dmesg info:
OpenBSD 6.1 (GENERIC.MP) #291: Sat Apr 1 13:53:41 MDT 2017
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz ("GenuineIntel" 686-class)
1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
real mem = 3654131712 (3484MB)
avail mem = 3571363840 (3405MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 04/13/12, SMBIOS rev. 2.7 @ 0xeb510 (72 entries)
bios0: vendor American Megatrends Inc. version "FA" date 02/25/2014
bios0: Gigabyte Technology Co., Ltd. C1037UN-EU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4)
RP03(S4) PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz ("GenuineIntel" 686-class)
1.80 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0400" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xf200
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1800, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1600x1200, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2806, using Realtek/0x0887
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 16
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address fc:aa:14:2b:6d:c0
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: apic 2 int 17
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address fc:aa:14:2b:6d:c2
rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb2 at pci0 dev 28 function 2 "Intel 82801BAM Hub-to-PCI" rev 0xc4:
apic 2 int 18
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "Intel 82801BA Hub-to-PCI" rev 0x41
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel 82546EB" rev 0x01: apic 2 int 18,
address 00:11:0a:5d:e3:20
em1 at pci4 dev 0 function 1 "Intel 82546EB" rev 0x01: apic 2 int 19,
address 00:11:0a:5d:e3:21
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel NM70 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200AVJS-6, 01.0> SCSI3
0/direct fixed naa.50014ee0ab6a6491
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa30
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Tangtop USBPS2" rev
1.10/0.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Tangtop USBPS2" rev
1.10/0.01 addr 3
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (3ee72ff6bfa7fcb8.a) swap on sd0b dump on sd0b
hwinfo:
hw.sensors.acpitz0.temp0=27.80 degC (zone temperature)
hw.sensors.acpitz1.temp0=29.80 degC (zone temperature)
hw.sensors.cpu0.temp0=23.00 degC
hw.sensors.it0.temp0=33.00 degC
hw.sensors.it0.temp1=201.00 degC
hw.sensors.it0.fan0=0 RPM
hw.sensors.it0.fan1=0 RPM
hw.sensors.it0.fan2=0 RPM
hw.sensors.it0.fan3=0 RPM
hw.sensors.it0.fan4=0 RPM
hw.sensors.it0.volt0=0.99 VDC (VCORE_A)
hw.sensors.it0.volt1=2.96 VDC (VCORE_B)
hw.sensors.it0.volt2=2.72 VDC (+3.3V)
hw.sensors.it0.volt3=4.52 VDC (+5V)
hw.sensors.it0.volt4=11.84 VDC (+12V)
hw.sensors.it0.volt5=-9.75 VDC (-12V)
hw.sensors.it0.volt6=-2.35 VDC (-5V)
hw.sensors.it0.volt7=3.76 VDC (+5VSB)
hw.sensors.it0.volt8=2.03 VDC (VBAT)
If I either upgrade or do a fresh install of 6.2 all appears to be going
fine until the 'reboot' stage. The bootloader starts and then spools
the usual list of info to the screen. After about a page and a half,
the screen blanks and the system will respond to nothing.
The only way to recover is with a hardware reset or power-down. At next
power-up, the motherboard has a dual-bios facility that then resets to
its safe-bios version. I can then 'upgrade' back to 6.1 or do a fresh
install.
All installs are i386 from USB using install.fs with SHA256 checked.
I have been using OpenBSD since version 3.2. Occasionally I have come
across incompatible hardware though the next version usually fixes it.
This is the first time that a new version fails where an old verion is good.
I think this problem is not something I can fix without help but I would
appreciate some ideas. Should I just continue using 6.1 and hope it
gets fixed in 6.3?
Barnaby.
[email protected]
