Hi,
After upgrading an i386 host from:
OpenBSD 6.2-current (GENERIC) #405: Tue Feb 27 14:48:56 MST 2018
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
to latest snapshot (6.3):
OpenBSD 6.3 (GENERIC) #451: Thu Mar 15 18:02:06 MDT 2018
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
The host panic at boottime.
(note that the AML PARSE ERROR was already present previously)
>> OpenBSD/i386 BOOT 3.31
boot>
booting hd0a:/bsd: 8125132+2212868+164144+0+1093632
[659946+82+492496+504206]=0xca5964
entry point at 0x2000d4
[ using 1657188 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.3 (GENERIC) #451: Thu Mar 15 18:02:06 MDT 2018
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 200740864 (191MB)
avail mem = 183160832 (174MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 04/22/99, BIOS32 rev. 0 @ 0xfd861, SMBIOS rev. 2.1 @
0xf7db5 (33 entries)
bios0: vendor IBM version "PDKT24AFR" date 04/22/99
bios0: IBM 6285660
acpi0 at bios0: rev 0### AML PARSE ERROR (0x57): Undefined name: OPT
error in acpi_parse_aml
acpi0: sleep states
acpi0: tables DSDT FACP
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpicpu0 at acpi0: C1(@1 halt!)
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xec000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev
0x02uvm_fault(0xd0c5d1bc, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at kvm86_call+0x30: movl 0xd,%edi
ddb> trace
kvm86_call(d0ea8bf0) at kvm86_call+0x30
kvm86_simplecall(15,d0ea8c78) at kvm86_simplecall+0x184
piixpcib_configure_speedstep(d1564c00) at piixpcib_configure_speedstep+0x99
piixpcib_attach(d1564180,d1564c00,d0ea8d58) at piixpcib_attach+0x14
config_attach(d1564180,d0bfb824,d0ea8d58,d02da130) at config_attach+0x184
config_found_sm(d1564180,d0ea8d58,d02da130,d02da1f0,0) at config_found_sm+0x29
pci_probe_device(d1564180,80001000,0,0) at pci_probe_device+0x4ee
pci_enumerate_bus(d1564180,0,0) at pci_enumerate_bus+0xb9
pciattach(d15690c0,d1564180,d0ea8eb8) at pciattach+0xe2
config_attach(d15690c0,d0bf9f84,d0ea8eb8,d02997a0) at config_attach+0x184
config_found_sm(d15690c0,d0ea8eb8,d02997a0,0) at config_found_sm+0x29
mainbus_attach(0,d15690c0,0) at mainbus_attach+0x2a1
config_attach(0,d0bf9e64,0,0) at config_attach+0x184
config_rootfound(d09c515b,0) at config_rootfound+0xc0
cpu_configure(5e954745,ea6000,eb5000,0,d02004d1) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x478
Disabling piixpcib* at UKC makes the system to finish the boot.
Here the dmesg (with piixpcib* disabled).
$ dmesg
OpenBSD 6.3 (GENERIC) #451: Thu Mar 15 18:02:06 MDT 2018
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 200740864 (191MB)
avail mem = 183160832 (174MB)
User Kernel Config
UKC> disable piixpcib*
260 piixpcib* disabled
UKC> quit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 04/22/99, BIOS32 rev. 0 @ 0xfd861, SMBIOS rev. 2.1 @
0xf7db5 (33 entries)
bios0: vendor IBM version "PDKT24AFR" date 04/22/99
bios0: IBM 6285660
acpi0 at bios0: rev 0### AML PARSE ERROR (0x57): Undefined name: OPT\^T
error in acpi_parse_aml
acpi0: sleep states
acpi0: tables DSDT FACP
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpicpu0 at acpi0: C1(@1 halt!)
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xec000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CX10.2A>
wd0: 16-sector PIO, LBA, 9787MB, 20044080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-532E-B, 7.0A> ATAPI 5/cdrom removable
wd1 at pciide0 channel 1 drive 1: <ST340016A>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 5
piixpm0 at pci0 dev 2 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL2
spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC133CL3
spdmem2 at iic0 addr 0x55: 3GB DDR2 SDRAM PC2-3700CL5
sis0 at pci0 dev 16 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 11,
address 00:0f:b5:42:58:eb
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
re0 at pci0 dev 20 function 0 "D-Link DGE-528T" rev 0x10: RTL8169/8110SB
(0x1000), irq 10, address c8:be:19:49:c6:27
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 3
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
ne1: irq 10 already in use
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
isapnp0 at isa0 port 0x279: read port 0x203
ne3 at isapnp0 "ATI AT-2000 PnP Ethernet Networ, ATIF430, PNP80D6, " port
0x220/32 irq 3: NE2000 (RTL8019), address 00:00:f4:c2:62:03
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (d4c88ed12283c942.a) swap on wd0b dump on wd0b
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
--
Sebastien Marie
