On Thu, Apr 19, 2018 at 09:46:54AM -0700, Carlos Cardenas wrote: > On Thu, Apr 19, 2018 at 03:03:51PM +1000, Jonathan Gray wrote: > > On Wed, Apr 18, 2018 at 06:59:42PM -0700, Carlos Cardenas wrote: > > > On Thu, Apr 19, 2018 at 09:35:19AM +1000, Jonathan Gray wrote: > > > > On Wed, Apr 18, 2018 at 03:29:10PM -0700, Carlos Cardenas wrote: > > > > > Howdy. > > > > > > > > > > Please excuse this poor bug report, I'm not able to obtain more info > > > > > as > > > > > the system locks hard (below is transcribed by hand). > > > > > > > > > > On a clean install, with the latest snap (as of time of email): > > > > > OpenBSD 6.3-current (GENERIC.MP) #207: Wed Apr 18 11:37:15 MDT 2018 > > > > > > > > > > CPU: AMD A8-7670K Radeon R7 aka Kaveri > > > > > > > > > > extent_free(ffffffff819489f8,100,1000,7e281000) at extent_free+0x110 > > > > > bus_space_unmap(0,ffff8000000de000,0) at bus_space_unmap+0x110 > > > > > radeon_device_fini(ffff8000000de000) at radeon_device_fini+0x43 > > > > > radeondrm_detach_kms(0,ffff8000000de000) at radeondrm_detach_kms+0x33 > > > > > config_detach(ffff8000000dd600,ffff8000000de000) at > > > > > config_detach+0x14e > > > > > radeondrm_attachhook(ffffffff81bf9420) at radeondrm_attachhook+0x9d > > > > > config_process_deferred_mountroot() at > > > > > config_process_deferred_mountroot+0x56 > > > > > main(6dd84e08) at main+0x80f > > > > > > > > See the other thread on bugs. Not sure when a snapshot with the fix > > > > will go out. > > > > > > I'm tracking bluhm's thread as well. > > > > > > With snap #209 (which has that patch), we get further along from a clean > > > install: > > > > > > initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1462:0x7969). > > > cik_cp: Failed to load firmware "radeon/KAVERI_pfp.bin" > > > error: [drm:pid0:cik_init] *ERROR* Failed to load Firmware! > > > drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init > > > ttm_pool_mm_shrink_fini: stub > > > drm0 detached > > > radeondrm0 detached > > > vendor "ATI", unknown product 0x1313 (class display subclass VGA, rev > > > 0xd4) at > > > pci0 dev 1 function 0 not configured > > > init: can't open /dev/console: Device not configured > > > init: can't open /dev/console: Device not configured > > > init: can't open /dev/console: Device not configured > > > [repeats] > > > > So I'm quite sure you are booting via uefi with efifb here. > > There was previously no code that reprobed efifb as efifb isn't probed > > via pci devices. > > > > The following on top of radeon.diff.2 works here when removing the > > firmware and booting via efiboot on a mullins system. > > > > That was it....attached are two dmesg's: > * one after a clean install with no firmware loaded > * one after first boot with firmware loaded > > With the firmware loaded, there's an artifact of a vertical purple line > along the left side of the screen (x=0) but everything seems to be ok (X > looks nice).
Are you setting a different gop mode via efiboot/boot.conf ? If you compile a kernel with efifb commented out (not just disabled via ukc) do the ring tests pass? Proper acceleration on kaveri requires building Mesa 17.3 against ports libLLVM. But the ring tests should still pass without that. > > Thanks for the hard work getting radeon updated. > > +--+ > Carlos > OpenBSD 6.3-current (GENERIC.MP) #0: Thu Apr 19 08:52:15 PDT 2018 > los@rollo.castle:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 16046288896 (15302MB) > avail mem = 15552057344 (14831MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xecc20 (55 entries) > bios0: vendor American Megatrends Inc. version "V1.3" date 04/13/2016 > bios0: MSI MS-7969 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET UEFI IVRS SSDT SSDT CRAT > SSDT SSDT > acpi0: wakeup devices SBAZ(S4) P0PC(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) > OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) PE20(S4) PE21(S4) PE23(S4) > PB21(S4) PB22(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 16 (boot processor) > cpu0: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3595.97 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 17 (application processor) > cpu1: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3593.30 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 18 (application processor) > cpu2: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3593.31 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 19 (application processor) > cpu3: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3593.30 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins > ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 4 (P0PC) > acpiprt2 at acpi0: bus -1 (PE20) > acpiprt3 at acpi0: bus -1 (PE21) > acpiprt4 at acpi0: bus -1 (PE23) > acpiprt5 at acpi0: bus 1 (PB21) > acpiprt6 at acpi0: bus -1 (PB22) > acpiprt7 at acpi0: bus 2 (PB31) > acpiprt8 at acpi0: bus -1 (PB32) > acpiprt9 at acpi0: bus 3 (PB33) > acpiprt10 at acpi0: bus -1 (PB34) > acpiprt11 at acpi0: bus -1 (PE22) > acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicmos0 at acpi0 > acpibtn0 at acpi0: PWRB > "PNP0C14" at acpi0 not configured > acpivideo0 at acpi0: VGA_ > acpivideo1 at acpi0: VGA_ > acpivideo2 at acpi0: VGA_ > cpu0: 3595 MHz: speeds: 3600 3400 3100 2800 2400 1900 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 vendor "AMD", unknown product 0x1422 rev 0x00 > vendor "AMD", unknown product 0x1423 (class system subclass IOMMU, rev 0x00) > at pci0 dev 0 function 2 not configured > radeondrm0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x1313 rev > 0xd4 > drm0 at radeondrm0 > radeondrm0: msi > azalia0 at pci0 dev 1 function 1 vendor "ATI", unknown product 0x1308 rev > 0x00: msi > azalia0: no supported codecs > pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x1424 rev 0x00 > ppb0 at pci0 dev 2 function 1 vendor "AMD", unknown product 0x1425 rev 0x00: > msi > pci1 at ppb0 bus 1 > oce0 at pci1 dev 0 function 0 "ServerEngines BladeEngine2 10GbE" rev 0x02: > apic 1 int 0, address b4:99:ba:5d:d2:f0 > oce1 at pci1 dev 0 function 1 "ServerEngines BladeEngine2 10GbE" rev 0x02: > apic 1 int 1, address b4:99:ba:5d:d2:f4 > pchb2 at pci0 dev 3 function 0 vendor "AMD", unknown product 0x1424 rev 0x00 > ppb1 at pci0 dev 3 function 1 vendor "AMD", unknown product 0x1426 rev 0x00: > msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > (0x4c00), msi, address 4c:cc:6a:46:e7:25 > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 > ppb2 at pci0 dev 3 function 3 vendor "AMD", unknown product 0x1426 rev 0x00: > msi > pci3 at ppb2 bus 3 > xhci0 at pci3 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 > addr 1 > pchb3 at pci0 dev 4 function 0 vendor "AMD", unknown product 0x1424 rev 0x00 > xhci1 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi > usb1 at xhci1: USB revision 3.0 > uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 > addr 1 > ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Patriot Blast, SAFM> SCSI3 0/direct fixed > t10.ATA_Patriot_Blast_DF0B0773027D00006925 > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HM100UI, 2AM1> SCSI3 0/direct > fixed naa.50024e9204a70bb6 > sd1: 953869MB, 512 bytes/sector, 1953525168 sectors > ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, > version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17 > usb2 at ehci0: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 > addr 1 > ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, > version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17 > usb3 at ehci1: USB revision 2.0 > uhub3 at usb3 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 > addr 1 > piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling > iic0 at piixpm0 > spdmem0 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 > spdmem1 at iic0 addr 0x53: 8GB DDR3 SDRAM PC3-12800 > pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11 > ppb3 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40 > pci4 at ppb3 bus 4 > ohci2 at pci0 dev 20 function 5 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, > version 1.0, legacy support > pchb4 at pci0 dev 24 function 0 vendor "AMD", unknown product 0x141a rev 0x00 > pchb5 at pci0 dev 24 function 1 vendor "AMD", unknown product 0x141b rev 0x00 > pchb6 at pci0 dev 24 function 2 vendor "AMD", unknown product 0x141c rev 0x00 > pchb7 at pci0 dev 24 function 3 vendor "AMD", unknown product 0x141d rev 0x00 > pchb8 at pci0 dev 24 function 4 vendor "AMD", unknown product 0x141e rev 0x00 > pchb9 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x141f rev 0x00 > usb4 at ohci0: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 > addr 1 > usb5 at ohci1: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 > addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > usb6 at ohci2: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 > addr 1 > vmm0 at mainbus0: SVM/RVI > efifb at mainbus0 not configured > uhub7 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev > 2.10/4.20 addr 2 > uhidev0 at uhub7 port 1 configuration 1 interface 0 "Microsoft Microsoft\M-. > Nano Transceiver v1.0" rev 2.00/7.04 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev1 at uhub7 port 1 configuration 1 interface 1 "Microsoft Microsoft\M-. > Nano Transceiver v1.0" rev 2.00/7.04 addr 3 > uhidev1: iclass 3/1, 26 report ids > uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 > uhid1 at uhidev1 reportid 23: input=0, output=0, feature=1 > ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir > wsmouse0 at ums0 mux 0 > uhidev2 at uhub7 port 1 configuration 1 interface 2 "Microsoft Microsoft\M-. > Nano Transceiver v1.0" rev 2.00/7.04 addr 3 > uhidev2: iclass 3/0, 8 report ids > uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0 > uhid3 at uhidev2 reportid 4: input=1, output=0, feature=0 > uhid4 at uhidev2 reportid 7: input=7, output=0, feature=0 > uhid5 at uhidev2 reportid 8: input=1, output=0, feature=0 > uhub8 at uhub7 port 3 configuration 1 interface 0 "ATEN International product > 0x8021" rev 1.10/1.00 addr 4 > uhidev3 at uhub8 port 1 configuration 1 interface 0 "Corsair Corsair K70R > Gaming Keyboard" rev 2.00/1.09 addr 5 > uhidev3: iclass 3/1 > ukbd1 at uhidev3: 8 variable keys, 6 key codes > wskbd2 at ukbd1 mux 1 > uhidev4 at uhub8 port 1 configuration 1 interface 1 "Corsair Corsair K70R > Gaming Keyboard" rev 2.00/1.09 addr 5 > uhidev4: iclass 3/0 > uhid6 at uhidev4: input=4, output=0, feature=0 > uhidev5 at uhub8 port 1 configuration 1 interface 2 "Corsair Corsair K70R > Gaming Keyboard" rev 2.00/1.09 addr 5 > uhidev5: iclass 3/0 > ukbd2 at uhidev5: 120 variable keys, 0 key codes > wskbd3 at ukbd2 mux 1 > umass0 at uhub2 port 2 configuration 1 interface 0 "innostor USB 3.0" rev > 2.10/0.01 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd2 at scsibus2 targ 1 lun 0: <IS917, innostor, 1.00> SCSI4 0/direct > removable serial.1f750917201207220840 > sd2: 30000MB, 512 bytes/sector, 61440000 sectors > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (348d8b5aa0286d7e.a) swap on sd0b dump on sd0b > initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1462:0x7969). > cik_cp: Failed to load firmware "radeon/KAVERI_pfp.bin" > error: [drm:pid0:cik_init] *ERROR* Failed to load firmware! > drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init > efifb0 at mainbus0: 1920x1080, 32bpp > wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wskbd2: connecting to wsdisplay0 > wskbd3: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > OpenBSD 6.3-current (GENERIC.MP) #0: Thu Apr 19 08:52:15 PDT 2018 > los@rollo.castle:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 16046288896 (15302MB) > avail mem = 15552057344 (14831MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xecc20 (55 entries) > bios0: vendor American Megatrends Inc. version "V1.3" date 04/13/2016 > bios0: MSI MS-7969 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET UEFI IVRS SSDT SSDT CRAT > SSDT SSDT > acpi0: wakeup devices SBAZ(S4) P0PC(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) > OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) PE20(S4) PE21(S4) PE23(S4) > PB21(S4) PB22(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 16 (boot processor) > cpu0: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3595.93 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 17 (application processor) > cpu1: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3593.30 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 18 (application processor) > cpu2: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3593.30 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 19 (application processor) > cpu3: AMD A8-7670K Radeon R7, 10 Compute Cores 4C+6G, 3593.30 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1 > cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins > ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 4 (P0PC) > acpiprt2 at acpi0: bus -1 (PE20) > acpiprt3 at acpi0: bus -1 (PE21) > acpiprt4 at acpi0: bus -1 (PE23) > acpiprt5 at acpi0: bus 1 (PB21) > acpiprt6 at acpi0: bus -1 (PB22) > acpiprt7 at acpi0: bus 2 (PB31) > acpiprt8 at acpi0: bus -1 (PB32) > acpiprt9 at acpi0: bus 3 (PB33) > acpiprt10 at acpi0: bus -1 (PB34) > acpiprt11 at acpi0: bus -1 (PE22) > acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicmos0 at acpi0 > acpibtn0 at acpi0: PWRB > "PNP0C14" at acpi0 not configured > acpivideo0 at acpi0: VGA_ > acpivideo1 at acpi0: VGA_ > acpivideo2 at acpi0: VGA_ > cpu0: 3595 MHz: speeds: 3600 3400 3100 2800 2400 1900 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 vendor "AMD", unknown product 0x1422 rev 0x00 > vendor "AMD", unknown product 0x1423 (class system subclass IOMMU, rev 0x00) > at pci0 dev 0 function 2 not configured > radeondrm0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x1313 rev > 0xd4 > drm0 at radeondrm0 > radeondrm0: msi > azalia0 at pci0 dev 1 function 1 vendor "ATI", unknown product 0x1308 rev > 0x00: msi > azalia0: no supported codecs > pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x1424 rev 0x00 > ppb0 at pci0 dev 2 function 1 vendor "AMD", unknown product 0x1425 rev 0x00: > msi > pci1 at ppb0 bus 1 > oce0 at pci1 dev 0 function 0 "ServerEngines BladeEngine2 10GbE" rev 0x02: > apic 1 int 0, address b4:99:ba:5d:d2:f0 > oce1 at pci1 dev 0 function 1 "ServerEngines BladeEngine2 10GbE" rev 0x02: > apic 1 int 1, address b4:99:ba:5d:d2:f4 > pchb2 at pci0 dev 3 function 0 vendor "AMD", unknown product 0x1424 rev 0x00 > ppb1 at pci0 dev 3 function 1 vendor "AMD", unknown product 0x1426 rev 0x00: > msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > (0x4c00), msi, address 4c:cc:6a:46:e7:25 > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 > ppb2 at pci0 dev 3 function 3 vendor "AMD", unknown product 0x1426 rev 0x00: > msi > pci3 at ppb2 bus 3 > xhci0 at pci3 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 > addr 1 > pchb3 at pci0 dev 4 function 0 vendor "AMD", unknown product 0x1424 rev 0x00 > xhci1 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi > usb1 at xhci1: USB revision 3.0 > uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 > addr 1 > ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Patriot Blast, SAFM> SCSI3 0/direct fixed > t10.ATA_Patriot_Blast_DF0B0773027D00006925 > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HM100UI, 2AM1> SCSI3 0/direct > fixed naa.50024e9204a70bb6 > sd1: 953869MB, 512 bytes/sector, 1953525168 sectors > ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, > version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17 > usb2 at ehci0: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 > addr 1 > ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, > version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17 > usb3 at ehci1: USB revision 2.0 > uhub3 at usb3 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 > addr 1 > piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling > iic0 at piixpm0 > spdmem0 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 > spdmem1 at iic0 addr 0x53: 8GB DDR3 SDRAM PC3-12800 > pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11 > ppb3 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40 > pci4 at ppb3 bus 4 > ohci2 at pci0 dev 20 function 5 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, > version 1.0, legacy support > pchb4 at pci0 dev 24 function 0 vendor "AMD", unknown product 0x141a rev 0x00 > pchb5 at pci0 dev 24 function 1 vendor "AMD", unknown product 0x141b rev 0x00 > pchb6 at pci0 dev 24 function 2 vendor "AMD", unknown product 0x141c rev 0x00 > pchb7 at pci0 dev 24 function 3 vendor "AMD", unknown product 0x141d rev 0x00 > pchb8 at pci0 dev 24 function 4 vendor "AMD", unknown product 0x141e rev 0x00 > pchb9 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x141f rev 0x00 > usb4 at ohci0: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 > addr 1 > usb5 at ohci1: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 > addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > usb6 at ohci2: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 > addr 1 > vmm0 at mainbus0: SVM/RVI > efifb at mainbus0 not configured > uhub7 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev > 2.10/4.20 addr 2 > uhidev0 at uhub7 port 1 configuration 1 interface 0 "Microsoft Microsoft\M-. > Nano Transceiver v1.0" rev 2.00/7.04 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev1 at uhub7 port 1 configuration 1 interface 1 "Microsoft Microsoft\M-. > Nano Transceiver v1.0" rev 2.00/7.04 addr 3 > uhidev1: iclass 3/1, 26 report ids > uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 > uhid1 at uhidev1 reportid 23: input=0, output=0, feature=1 > ums0 at uhidev1 reportid 26: 5 buttons, Z and W dir > wsmouse0 at ums0 mux 0 > uhidev2 at uhub7 port 1 configuration 1 interface 2 "Microsoft Microsoft\M-. > Nano Transceiver v1.0" rev 2.00/7.04 addr 3 > uhidev2: iclass 3/0, 8 report ids > uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0 > uhid3 at uhidev2 reportid 4: input=1, output=0, feature=0 > uhid4 at uhidev2 reportid 7: input=7, output=0, feature=0 > uhid5 at uhidev2 reportid 8: input=1, output=0, feature=0 > uhub8 at uhub7 port 3 configuration 1 interface 0 "ATEN International product > 0x8021" rev 1.10/1.00 addr 4 > uhidev3 at uhub8 port 1 configuration 1 interface 0 "Corsair Corsair K70R > Gaming Keyboard" rev 2.00/1.09 addr 5 > uhidev3: iclass 3/1 > ukbd1 at uhidev3: 8 variable keys, 6 key codes > wskbd2 at ukbd1 mux 1 > uhidev4 at uhub8 port 1 configuration 1 interface 1 "Corsair Corsair K70R > Gaming Keyboard" rev 2.00/1.09 addr 5 > uhidev4: iclass 3/0 > uhid6 at uhidev4: input=4, output=0, feature=0 > uhidev5 at uhub8 port 1 configuration 1 interface 2 "Corsair Corsair K70R > Gaming Keyboard" rev 2.00/1.09 addr 5 > uhidev5: iclass 3/0 > ukbd2 at uhidev5: 120 variable keys, 0 key codes > wskbd3 at ukbd2 mux 1 > umass0 at uhub2 port 2 configuration 1 interface 0 "innostor USB 3.0" rev > 2.10/0.01 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd2 at scsibus2 targ 1 lun 0: <IS917, innostor, 1.00> SCSI4 0/direct > removable serial.1f750917201207220840 > sd2: 30000MB, 512 bytes/sector, 61440000 sectors > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (348d8b5aa0286d7e.a) swap on sd0b dump on sd0b > initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1462:0x7969). > error: [drm:pid0:cik_ring_test] *ERROR* radeon: ring 2 test failed > (scratch(0x3010C)=0xCAFEDEAD) > error: [drm:pid0:cik_sdma_ring_test] *ERROR* radeon: ring 3 test failed > (0xCAFEDEAD) > drm:pid0:cik_init *ERROR* disabling GPU acceleration > Can't enable IRQ/MSI because no handler is installed > radeondrm0: 1920x1080, 32bpp > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wskbd2: connecting to wsdisplay0 > wskbd3: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation)
