Forwarded with permission.
---------- Forwarded message ----------
Date: Tue, 1 May 2018 12:22:41 -0700
From: Davide Marini <[email protected]>
To: Philip Guenther <[email protected]>
Subject: Re: Kernel Panic on OpenBSD 6.3 AMD64 // Chrome Related
Hi Philip,
Thank you SO much for the prompt response! I couldn't add a dmesg because
the machine cannot be booted any more.
Nevertheless, I just realized that I had installed version 6.2 on a
different hard drive a while ago, so here is the dmesg from this same
machine, but for version 6.2. I hope this helps.
Thanks again very much!
Davide
On Tue, May 1, 2018 at 2:30 PM, Philip Guenther <[email protected]>
wrote:
> On Tue, 1 May 2018, Davide Marini wrote:
> > First of all: thank you for the incredible work you are doing to
> > continually strengthen and improve this amazing operating system. I have
> > been a very happy and grateful user for almost ten years.
> >
> > I recently installed OpenBSD 6.3 AMD64 on my new HP Z240 desktop
> > workstation and have experienced two kernel panics that led to the
> > machine being now unusable (hangs on boot). The machine has an
> > integrated Intel graphics card.
> >
> > Unfortunately I am not an expert user, so all I can contribute are two
> > pictures of my screen after the panics (attached).
>
> To manually transcribe the initial kernel errors (it's just a bit of
> typing, really), from the first screen shot:
>
> # ahci0: attempting to idle device
> # ahci0: couldn't recover NCQ error, failing all outstanding commands.
> # mode = 0100600, inum = 131, fs = /tmp
> # panic: ffs_valloc: dup alloc
>
> ...and from the second:
> # ahci0: NCQ errored slot 27 is idle (00000004 active)
> # mode = 0100600, inum = 23, fs = /tmp
> # panic: ffs_valloc: dup alloc
>
> So, ahci, the disk controller, is where the first error is reported.
>
> This is where we need the contents of /var/run/dmesg from this box, with
> the complete dmesg output. (Rule of thumb: when reporting *any* problem,
> include the dmesg from the box so we have some idea of the set up of the
> involved machine.)
>
>
> Philip Guenther
>
OpenBSD 6.2 (GENERIC.MP) #134: Tue Oct 3 21:22:29 MDT 2017
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16937627648 (16152MB)
avail mem = 16417284096 (15656MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xb3a02000 (83 entries)
bios0: vendor HP version "N51 Ver. 01.63" date 10/05/2017
bios0: HP HP Z240 Tower Workstation
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT TCPA SSDT UEFI SSDT SSDT WSMT HPET APIC MCFG SSDT
SSDT SSDT ASF! FPDT BGRT
acpi0: wakeup devices PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) PEG0(S4)
PS2K(S3) PS2M(S3) GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) PXSX(S4) RP01(S4)
PXSX(S4) RP02(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 3600000000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz, 3600.00 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus -1 (PEG0)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus 1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiprt12 at acpi0: bus -1 (RP09)
acpiprt13 at acpi0: bus -1 (RP10)
acpiprt14 at acpi0: bus -1 (RP11)
acpiprt15 at acpi0: bus -1 (RP12)
acpiprt16 at acpi0: bus -1 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpiec0 at acpi0: not present
acpiec1 at acpi0
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG01, resource for PEG1
acpipwrres1 at acpi0: PG02, resource for PEG2
acpipwrres2 at acpi0: WRST
acpipwrres3 at acpi0: PG00, resource for PEG0
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpipwrres23 at acpi0: WRST
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"HPQ8001" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0A06" at acpi0 not configured
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x001b15d1 rev 0x10
"INT3394" at acpi0 not configured
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3200, 3000, 2800,
2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x591f rev 0x05
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 630" rev 0x04
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
firmware i915/kbl_dmc_ver1.bin (-22)
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x31: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
ahci0: PHY offline on port 3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7LN512, MVT0> SCSI3 0/direct
fixed naa.5002538d424a3d38
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, TOSHIBA DT01ACA2, MX4O> SCSI3 0/direct
fixed naa.5000039fe5f676f2
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
cd0 at scsibus1 targ 2 lun 0: <hp HLDS, DVDRW GUD1N, LD02> ATAPI 5/cdrom
removable
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address
68:05:ca:6c:77:b2
pcib0 at pci0 dev 31 function 0 "Intel C236 LPC" rev 0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x31: msi
azalia0: codecs: Realtek ALC221, Intel/0x280b, using Realtek ALC221
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2 int
16
iic0 at ichiic0
iic0: addr 0x49 0f=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff
06=ffff 07=ffff
em1 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x31: msi, address
3c:52:82:5d:95:99
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB Laser Mouse"
rev 2.00/56.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 7 configuration 1 interface 0 "SteelSeries SteelSeries
Apex 100 Gaming Keyboard" rev 1.10/0.41 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 7 configuration 1 interface 1 "SteelSeries SteelSeries
Apex 100 Gaming Keyboard" rev 1.10/0.41 addr 3
uhidev2: iclass 3/0
uhid0 at uhidev2: input=32, output=32, feature=0
uhidev3 at uhub0 port 7 configuration 1 interface 2 "SteelSeries SteelSeries
Apex 100 Gaming Keyboard" rev 1.10/0.41 addr 3
uhidev3: iclass 3/0, 2 report ids
uhid1 at uhidev3 reportid 1: input=4, output=0, feature=0
ukbd1 at uhidev3 reportid 2: 0 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
umass0 at uhub0 port 19 configuration 1 interface 0 "Realtek USB3.0 Card
Reader" rev 3.00/29.08 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Generic-, USB3.0 CRW, 1.00> SCSI4 0/direct
removable serial.0bda0329201408282030
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (2a81977389e95a49.a) swap on sd1b dump on sd1b
