>Synopsis: blank screen after startx
>Category: amd64
>Environment:
System : OpenBSD 6.3
Details : OpenBSD 6.3-current (GENERIC.MP) #42: Sat May 19 22:40:27 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
On fresh installed system after loged in and typing "startx" screen goes blank.
>How-To-Repeat:
Install current snapshot on same hardware.
>Fix:
Disable inteldrm.
dmesg:
OpenBSD 6.3-current (GENERIC.MP) #42: Sat May 19 22:40:27 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17071898624 (16281MB)
avail mem = 16546435072 (15779MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8ce6e000 (39 entries)
bios0: vendor American Megatrends Inc. version "R01-A4" date 10/16/2017
bios0: Acer Aspire U27-880
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT MSDM SSDT HPET
SSDT SSDT UEFI SSDT LPIT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT DMAR ASF!
WSMT
acpi0: wakeup devices PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4)
RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) PXSX(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 3493.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 3491.85 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 3491.85 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 3491.85 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 60 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus 58 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus 59 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpiec1 at acpi0
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
acpicmos0 at acpi0
"INT3F0D" at acpi0 not configured
"INT3403" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0c14" at acpi0 not configured
"INT3400" at acpi0 not configured
"INT340E" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3493 MHz: speeds: 2701, 2700, 2600, 2500,
2400, 2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to
load firmware i915/kbl_dmc_ver1.bin (-22)
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Core 6G Thermal" rev 0x02 at pci0 dev 4 function 0 not configured
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
scsibus1 at ahci0: 32 targets
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 58
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x11: RTL8168G/8111G
(0x4c00), msi, address 98:ee:cb:6b:82:1f
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 28 function 7 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 59
sdhc0 at pci3 dev 0 function 0 "O2 Micro 0Z8621 SD/MMC" rev 0x01: apic 2 int 19
sdhc0: SDHC 4.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 60
nvme0 at pci4 dev 0 function 0 "Intel Optane" rev 0x00: apic 2 int 16, NVMe 1.1
nvme0: INTEL MEMPEK1W016GA, firmware K3110310, serial PHBT71730154016D
scsibus2 at nvme0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <NVMe, INTEL MEMPEK1W01, K311> SCSI4
0/direct fixed
sd0: 13736MB, 512 bytes/sector, 28131328 sectors
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0286, Intel/0x280b, using Realtek/0x0286
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 4 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/29.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 4 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/29.00 addr 2
uhidev1: iclass 3/1, 17 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
umass0 at uhub0 port 14 configuration 1 interface 0 "SanDisk Extreme"
rev 3.00/0.10 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <SanDisk, Extreme, 0001> SCSI4 0/direct
removable serial.07815580150140560099
sd1: 29923MB, 512 bytes/sector, 61282631 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
Xorg.0.log:
[ 65.295] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 65.295] linear framebuffer access unavailable
[ 65.310] (--) Using wscons driver on /dev/ttyC4
[ 65.325]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 65.326] X Protocol Version 11, Revision 0
[ 65.326] Build Operating System: OpenBSD 6.3 amd64
[ 65.326] Current Operating System: OpenBSD pc.my.domain 6.3
GENERIC.MP#42 amd64
[ 65.326] Build Date: 19 May 2018 11:06:02PM
[ 65.326]
[ 65.326] Current version of pixman: 0.34.0
[ 65.326] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 65.326] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 65.326] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 20
18:47:08 2018
[ 65.330] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 65.332] (==) No Layout section. Using the first Screen section.
[ 65.332] (==) No screen section available. Using defaults.
[ 65.332] (**) |-->Screen "Default Screen Section" (0)
[ 65.332] (**) | |-->Monitor "<default monitor>"
[ 65.333] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 65.333] (==) Automatically adding devices
[ 65.333] (==) Automatically enabling devices
[ 65.333] (==) Not automatically adding GPU devices
[ 65.334] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 65.348] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 65.348] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 65.348] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 65.348] (II) Loader magic: 0xaaae3147000
[ 65.348] (II) Module ABI versions:
[ 65.348] X.Org ANSI C Emulation: 0.4
[ 65.348] X.Org Video Driver: 23.0
[ 65.348] X.Org XInput driver : 24.1
[ 65.348] X.Org Server Extension : 10.0
[ 65.349] (--) PCI:*(0:0:2:0) 8086:5916:1025:1188 rev 2, Mem @
0x2ffe000000/16777216, 0x2fc0000000/268435456, I/O @ 0x0000f000/64
[ 65.349] (II) LoadModule: "glx"
[ 65.352] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 65.379] (II) Module glx: vendor="X.Org Foundation"
[ 65.379] compiled for 1.19.6, module version = 1.0.0
[ 65.379] ABI class: X.Org Server Extension, version 10.0
[ 65.380] (==) Matched modesetting as autoconfigured driver 0
[ 65.380] (==) Assigned the driver to the xf86ConfigLayout
[ 65.380] (II) LoadModule: "modesetting"
[ 65.380] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 65.382] (II) Module modesetting: vendor="X.Org Foundation"
[ 65.382] compiled for 1.19.6, module version = 1.19.6
[ 65.382] Module class: X.Org Video Driver
[ 65.382] ABI class: X.Org Video Driver, version 23.0
[ 65.382] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 65.382] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 65.382] (II) modeset(0): using default device
[ 65.383] (II) modeset(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 65.383] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 65.383] (==) modeset(0): RGB weight 888
[ 65.383] (==) modeset(0): Default visual is TrueColor
[ 65.383] (II) Loading sub module "glamoregl"
[ 65.383] (II) LoadModule: "glamoregl"
[ 65.385] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 65.407] (II) Module glamoregl: vendor="X.Org Foundation"
[ 65.407] compiled for 1.19.6, module version = 1.0.0
[ 65.407] ABI class: X.Org ANSI C Emulation, version 0.4
[ 65.407] (II) glamor: OpenGL accelerated X.org driver based.
[ 65.478] (II) glamor: EGL version 1.4 (DRI2):
[ 65.513] (II) modeset(0): glamor initialized
