Cute little Atom powered disk box, but it seems the AHCI(-like?)
interfaces aren't working properly on OpenBSD. This system booted
from the on-board USB flash (PXE boot/install) and has a 1T SATA
disk that was recognized during POST.
Flipping the BIOS knob for SATA from AHCI to "compatibility" mode
didn't have an impact, it seems the disks are attached to something
that is at least logically an add-on device, not one managed by the
bios. In this dmesg, disk was in to the fourth bay, in the first,
the results were the same.
Other than disk, video came out HDMI port (didn't try X), USB
keyboard worked, looks like a wonderfully usable box. Other than
the disk. :)
Any prayer of using it for OpenBSD?
Thanks,
Nick.
OpenBSD 6.3-current (GENERIC.MP) #54: Mon Jun 25 13:10:32 MDT 2018
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2108932096 (2011MB)
avail mem = 2013593600 (1920MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe93d0 (52 entries)
bios0: vendor American Megatrends Inc. version "DR007" date 10/18/2013
bios0: Lenovo-EMC Corporation StorCenter Pro PX4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC MCFG HPET
acpi0: wakeup devices P0P2(S3) USB0(S3) USB1(S3) USB2(S3) USB5(S3) EUSB(S3)
USB3(S3) USB4(S3) USB6(S3) USBE(S3) GBE_(S1) PEX0(S1) PEX1(S1) PEX2(S1)
PEX3(S1) PEX4(S1) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz, 2128.35 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz, 2128.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
cpu1: 512KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz, 2128.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
cpu2: 512KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D2701 @ 2.13GHz, 2128.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
cpu3: 512KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P2)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus 4 (PEX4)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
"PNP0510" at acpi0 not configured
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Atom D2000/N2000 Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel GMA 3600" rev 0x0b
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb0 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
ahci0 at pci1 dev 0 function 0 vendor "Marvell", unknown product 0x9170 rev
0x13: msi, AHCI 1.0
scsibus1 at ahci0: 32 targets
ppb1 at pci0 dev 28 function 1 "Intel 82801JI PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
ahci1 at pci2 dev 0 function 0 vendor "Marvell", unknown product 0x9170 rev
0x13: msi, AHCI 1.0
ahci1: failed to start port, cannot probe PMP
ahci1: port 1: 3.0Gb/s
ahci1: failed to start command DMA on port 1, disabling
scsibus2 at ahci1: 32 targets
ppb2 at pci0 dev 28 function 2 "Intel 82801JI PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000): msi, address 00:d0:b8:2e:80:75
brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000): msi, address 00:d0:b8:2e:80:76
brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
xhci0 at pci4 dev 0 function 0 "Renesas uPD720202 xHCI" rev 0x02: msi, xHCI 1.0
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Renesas xHCI root hub" rev 3.00/1.00
addr 1
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00
ahci2 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, AHCI 1.2
scsibus3 at ahci2: 32 targets
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 0 int 18
iic0 at ichiic0
iic0: addr 0x1d 80=00 words 00=ffff 01=ffff 02=ffff 03=ffff 04=ffff 05=ffff
06=ffff 07=ffff
lm1 at iic0 addr 0x2d: W83627DHG
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-12800 SO-DIMM
usb3 at uhci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci2: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci3: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci4: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb8 at uhci5: USB revision 1.0
uhub8 at usb8 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
umass0 at uhub2 port 1 configuration 1 interface 0 " USB DISK 2.0" rev
2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd0 at scsibus4 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI4 0/direct removable
serial.13fe420043DFAD4A2A17
sd0: 956MB, 512 bytes/sector, 1957888 sectors
uhub9 at uhub8 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard Hub"
rev 1.10/2.00 addr 2
uhidev0 at uhub9 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard"
rev 1.10/2.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub9 port 1 configuration 1 interface 1 "Dell Dell USB Keyboard"
rev 1.10/2.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
root on sd0a (8282cac632bdcb97.a) swap on sd0b dump on sd0b
$ sysctl hw
hw.machine=amd64
hw.model=Intel(R) Atom(TM) CPU D2701 @ 2.13GHz
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:8282cac632bdcb97
hw.diskcount=1
hw.sensors.cpu0.temp0=43.00 degC
hw.sensors.lm1.temp0=32.00 degC
hw.sensors.lm1.temp2=-0.50 degC
hw.sensors.lm1.volt0=1.20 VDC (VCore)
hw.sensors.lm1.volt1=8.34 VDC (+12V)
hw.sensors.lm1.volt2=3.30 VDC (+3.3V)
hw.sensors.lm1.volt3=3.30 VDC (+3.3V)
hw.sensors.lm1.volt4=-29.51 VDC (-12V)
hw.sensors.lm1.volt5=0.27 VDC
hw.sensors.lm1.volt6=0.23 VDC
hw.sensors.lm1.volt7=3.31 VDC (3.3VSB)
hw.sensors.lm1.volt8=1.59 VDC (VBAT)
hw.cpuspeed=2128
hw.vendor=Lenovo-EMC Corporation
hw.product=StorCenter Pro PX4
hw.version=A
hw.serialno=0,0124NF3XiYyCO11z96MELQLOJvISzE9E+JicRhLgKYYCg6BZ1GD4ofEZG7+Kn
hw.uuid=00020003-0004-0005-0006-000700080009
hw.physmem=2108932096
hw.usermem=2108919808
hw.ncpufound=4
hw.allowpowerdown=1
hw.smt=0
