On Sat, Jul 21, 2018 at 09:30:36PM +0200, Eivind Eide wrote: > There are no crash with drm disabled. I'm attaching the dmesg to this > mail. So the update to radeondrm are the cause.
So we know that "ATI Radeon Mobility M7" is broken with the new drm code. Unfortunately I have no experience with that part of the kernel. I was just searching for other i386 regressions. I anybody else interested in fixing this old hardware? Does it work with the Linux version of the driver? bluhm > OpenBSD 6.3-current (GENERIC) #740: Fri Jul 20 13:18:53 MDT 2018 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > real mem = 2146852864 (2047MB) > avail mem = 2092728320 (1995MB) > User Kernel Config > UKC> disable radeondrm > 252 radeondrm* disabled > UKC> quit > Continuing... > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 05/15/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ > 0xf7690 (61 entries) > bios0: vendor Dell Computer Corporation version "A09" date 05/15/2003 > bios0: Dell Computer Corporation Latitude C640 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP > acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) UAR1(S3) USB0(S1) USB1(S1) > USB2(S1) MODM(S3) PCIE(S3) MPCI(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (PCIE) > acpiprt3 at acpi0: bus -1 (MPCI) > acpipwrres0 at acpi0: PADA, resource for ADPT > acpitz0 at acpi0: critical temperature is 99 degC > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "LIP8120DLP" serial 5184 type LION oem "Sony > Corp." > acpibat1 at acpi0: BAT1 not present > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: PBTN > acpibtn2 at acpi0: SBTN > acpicmos0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > acpivideo0 at acpi0: VID_ > bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800! 0xcf800/0x800! > cpu0 at mainbus0: (uniprocessor) > cpu0: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz ("GenuineIntel" 686-class) > 1.80 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PERF,MELTDOWN > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04 > intelagp0 at pchb0 > agp0 at intelagp0: aperture at 0xe8000000, size 0x4000000 > ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11 > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42 > pci2 at ppb1 bus 2 > xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11, > address 00:08:74:48:40:d6 > exphy0 at xl0 phy 24: 3Com internal media interface > cbb0 at pci2 dev 1 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11 > cbb1 at pci2 dev 1 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11 > ath0 at pci2 dev 3 function 0 "Atheros AR2413" rev 0x01: irq 11 > ath0: AR2413 7.8 phy 4.5 rf 5.6 eeprom 5.2, WOR3W, address 00:16:cf:53:07:71 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0x20 > pcmcia1 at cardslot1 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541080G9AT00> > wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2612, 1D21> ATAPI 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11, > ICH3 > ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3) > ac97: codec features mic channel, tone, simulated stereo, bass boost, 20 bit > DAC, 18 bit ADC, SRS 3D > audio0 at auich0 > "Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 5.9, 0x9b4cb1 0x0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed > sd0: 73241MB, 512 bytes/sector, 149998377 sectors > root on sd0a (b7aac228eb17d109.a) swap on sd0b dump on sd0b
