Hi, Same behaviour here with a Fujitsu Lifebook S752, although it only seems to affect RAMDISK_CD and not GENERIC.MP. I compiled both from a fresh tree and the latter boots fine, whereas the RD reboots in a loop just as shown below.
On 13:24 Tue 24 Jul , Sebastian Benoit wrote: > Edd Barrett([email protected]) on 2018.07.24 11:20:57 +0100: > > Hi, > >=20 > > Went to upgrade my snap on my laptop today and got a reboot. It was > > printing some stuff before the reboot. I had to video the screen and > > pause it to see what it said: > >=20 > > ---8<--- > > ... > > wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0 > > fatal protection fault in supervisor mode > > ... > > dump to dev 17,1 not possible > > rebooting... > > here is the panic as text. > > last kernel i was running was > OpenBSD 6.3-current (GENERIC.MP) #128: Fri Jul 13 00:41:59 MDT 2018 > > =0Dboot> =1B[06;00H > \=08|=08/=08-=08\=08|=08/=08booting hd0a:/bsd: -=08\=08|=08/=08-=083470154\= > =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= > -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= > =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= > =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= > |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= > =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= > /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= > =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= > -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= > =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= > \=08|=08/=08-=08\=08|=08/=08-=08+1483776\=08|=08/=08-=08\=08|=08/=08-=08\= > =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= > -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= > =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= > =08-=08\=08|=08/=08-=08\=08|=08/=08+3891832-=08\=08|=08/=08-=08\=08|=08/=08= > -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= > =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= > =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= > |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= > =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= > /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= > =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= > -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= > =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= > =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08+0+593920|=08 [365272/=08-=08\= > =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= > -=08\=08+111+437280|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= > -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08+290676\=08|=08/=08-=08= > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08]=3D0xa0e260 > /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08entry point at 0x1000158 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.= > org > > OpenBSD 6.3-current (RAMDISK_CD) #127: Mon Jul 23 19:33:54 MDT 2018 > [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem =3D 8572895232 (8175MB) > avail mem =3D 8309293056 (7924MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfcd20 (81 entries) > bios0: vendor American Megatrends Inc. version "'V1.00.B20'" date 05/19/2009 > bios0: empty empty > acpi0 at bios0: rev 0 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 1995.28 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE= > 36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,= > VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MEL= > TDOWN > cpu0: 6MB 64b/line 16-way L2 cache > cpu0: apic clock running at 332MHz > cpu0: mwait min=3D64, max=3D64, C-substates=3D0.2.2.2, IBE > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 7 (NPE2) > acpiprt2 at acpi0: bus 5 (NPE4) > acpiprt3 at acpi0: bus 1 (P0P1) > acpicpu at acpi0 not configured > "PNP0B00" at acpi0 not configured > "PNP0C0C" at acpi0 not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 5100 Host" rev 0x90 > ppb0 at pci0 dev 2 function 0 "Intel 5100 PCIE" rev 0x90 > pci1 at ppb0 bus 7 > em0 at pci1 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 4 int 16, addre= > ss 00:e0:81:b7:64:d6 > em1 at pci1 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 4 int 17, addre= > ss 00:e0:81:b7:64:d7 > ppb1 at pci0 dev 3 function 0 "Intel 5100 PCIE" rev 0x90 > pci2 at ppb1 bus 6 > ppb2 at pci0 dev 4 function 0 "Intel 5100 PCIE" rev 0x90: msi > pci3 at ppb2 bus 5 > ppb3 at pci0 dev 5 function 0 "Intel 5100 PCIE" rev 0x90 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 6 function 0 "Intel 5100 PCIE" rev 0x90 > pci5 at ppb4 bus 3 > ppb5 at pci0 dev 7 function 0 "Intel 5100 PCIE" rev 0x90 > pci6 at ppb5 bus 2 > "Intel I/OAT SCNB" rev 0x90 at pci0 dev 8 function 0 not configured > pchb1 at pci0 dev 16 function 0 "Intel 5100 FSB" rev 0x90 > pchb2 at pci0 dev 16 function 1 "Intel 5100 FSB" rev 0x90 > pchb3 at pci0 dev 16 function 2 "Intel 5100 FSB" rev 0x90 > pchb4 at pci0 dev 17 function 0 "Intel 5100 Reserved" rev 0x90 > pchb5 at pci0 dev 19 function 0 "Intel 5100 Reserved" rev 0x90 > pchb6 at pci0 dev 21 function 0 "Intel 5100 DDR" rev 0x90 > pchb7 at pci0 dev 22 function 0 "Intel 5100 DDR" rev 0x90 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.= > 00 addr 1 > uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 > uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 > uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 > uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x02: apic 4 int 16 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.= > 00 addr 1 > ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci7 at ppb6 bus 1 > vga1 at pci7 dev 0 function 0 "XGI Technology Volari Z7" rev 0x00 > wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) > "Intel 82801IR LPC" rev 0x02 at pci0 dev 31 function 0 not configured > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.2 > ahci0: port 0: 3.0Gb/s > ahci0: port 1: 3.0Gb/s > ahci0: port 2: 3.0Gb/s > ahci0: port 3: 3.0Gb/s > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, FUJITSU MHZ2250B, 0000> SCSI3 0/direct = > fixed naa.500000e0440400ef > sd0: 238475MB, 512 bytes/sector, 488397168 sectors > sd1 at scsibus0 targ 1 lun 0: <ATA, FUJITSU MHZ2250B, 0000> SCSI3 0/direct = > fixed naa.500000e044039824 > sd1: 238475MB, 512 bytes/sector, 488397168 sectors > sd2 at scsibus0 targ 2 lun 0: <ATA, INTEL SSDSC2CT06, 300i> SCSI3 0/direct = > fixed naa.50015178f35d12a5 > sd2: 57241MB, 512 bytes/sector, 117231408 sectors, thin > sd3 at scsibus0 targ 3 lun 0: <ATA, INTEL SSDSC2CW24, 400i> SCSI3 0/direct = > fixed naa.5001517bb2a92cf2 > sd3: 228936MB, 512 bytes/sector, 468862128 sectors, thin > "Intel 82801I SMBus" rev 0x02 at pci0 dev 31 function 3 not configured > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.= > 00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.= > 00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.= > 00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.= > 00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.= > 00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.= > 00 addr 1 > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay1 > fatal protection fault in supervisor mode > trap type 4 code 0 rip ffffffff8120a781 cs 8 rflags 10246 cr2 0 cpl 0 rsp = > ffff80002205d6a8 > gsbase 0xffffffff81864ff0 kgsbase 0x0 > panic: trap type 4, code=3D0, pc=3Dffffffff8120a781 > syncing disks... uvm_fault(0xffffffff818c4fd8, 0xc80, 0, 1) -> e > fatal page fault in supervisor mode > trap type 6 code 0 rip ffffffff810d9149 cs 8 rflags 10286 cr2 c80 cpl 0 rs= > p ffff80002205d4c0 > gsbase 0xffffffff81864ff0 kgsbase 0x0 > panic: trap type 6, code=3D0, pc=3Dffffffff810d9149 > > dump to dev 17,1 not possible > rebooting... >
