Just created a new upgrade ramdisk as usual:
$ cat /auto_upgrade-http.conf
Which disk is the root disk = sd1
Location of sets = http
HTTP Server = cdn.openbsd.org
Server directory = pub/OpenBSD/snapshots/amd64
$ doas upobsd -o /bsd.auto-http -u /auto_upgrade-http.conf
$ what /bsd.auto-http
/bsd.auto-http
OpenBSD 6.4-beta (RAMDISK_CD) #285: Tue Sep 18 02:33:12 MDT 2018
PD KSH v5.2.14 99/07/13.2
$OpenBSD: cert.pem,v 1.17 2018/09/12 22:17:08 sthen Exp $
After the five second timeout, autoupgrade starts but immediately fails:
uid 0 on /: file system full
The last upgrade using this method worked seemless somewhere around
(RAMDISK_CD) #277: Mon Sep 10 18:32:39 MDT 2018, unfortunately I don't
have the exact build number anymore as /bsd.auto-http was overwritten.
Here is some info from the install media right after dropping into the
shell:
$ df /
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/rd0a 7071 7071 0 100% /
$ ls -l /
total 154
-rw-r--r-- 1 root wheel 1464 Sep 18 08:30 .profile
-rw-r--r-- 1 root wheel 135 Sep 18 13:15 auto_upgrade.conf
lrwxr-xr-x 1 root wheel 11 Sep 18 08:30 autoinstall -> install.sub
drwxr-xr-x 2 root wheel 512 Sep 18 08:30 bin
drwxr-xr-x 2 root wheel 2048 Sep 18 13:56 dev
drwxr-xr-x 5 root wheel 512 Sep 18 13:51 etc
lrwxr-xr-x 1 root wheel 11 Sep 18 08:30 install -> install.sub
-rw-r--r-- 1 root wheel 2906 Sep 18 08:30 install.md
-rwxr-xr-x 1 root wheel 57372 Sep 18 08:30 install.sub
drwxr-xr-x 16 root wheel 512 Sep 18 13:54 mnt
drwxr-xr-x 2 root wheel 512 Sep 18 08:30 mnt2
drwxr-xr-x 2 root wheel 1024 Sep 18 08:30 sbin
drwxrwxrwt 4 root wheel 512 Sep 18 13:53 tmp
lrwxr-xr-x 1 root wheel 11 Sep 18 08:30 upgrade -> install.sub
drwxr-xr-x 6 root wheel 512 Sep 18 08:30 usr
drwxr-xr-x 6 root wheel 512 Sep 18 08:30 var
And dmesg from that particular boot:
OpenBSD 6.4-beta (RAMDISK_CD) #285: Tue Sep 18 02:33:12 MDT 2018
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8469942272 (8077MB)
avail mem = 8209461248 (7829MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (64 entries)
bios0: vendor LENOVO version "N10ET52W (1.31 )" date 04/06/2018
bios0: LENOVO 20CMCTO1WW
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT
SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI BGRT DMAR
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2095.46 MHz, 06-3d-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0B00" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"LEN0068" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
"Intel HD Graphics 5500" rev 0x09 at pci0 dev 2 function 0 not configured
"Intel Core 5G HD Audio" rev 0x09 at pci0 dev 3 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
68:f7:28:89:4d:4d
"Intel 9 Series HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
"Intel 9 Series LPC" rev 0x03 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, CT250BX100SSD1, MU01> SCSI3 0/direct fixed
naa.500a0751f0005b74
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
"Intel 9 Series SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
"Intel 9 Series Thermal" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/90.70 addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Kinesis Advantage2
Keyboard" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1
uhid at uhidev0 not configured
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Kinesis Advantage2
Keyboard" rev 2.00/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 1 configuration 1 interface 2 "Kinesis Advantage2
Keyboard" rev 2.00/1.00 addr 3
uhidev2: iclass 3/0, 2 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
uhidev3 at uhub1 port 3 configuration 1 interface 0 "Yubico Yubikey NEO
OTP+U2F+CCID" rev 2.00/3.50 addr 4
uhidev3: iclass 3/1
ukbd1 at uhidev3
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub1 port 3 configuration 1 interface 1 "Yubico Yubikey NEO
OTP+U2F+CCID" rev 2.00/3.50 addr 4
uhidev4: iclass 3/0
uhid at uhidev4 not configured
"Yubico Yubikey NEO OTP+U2F+CCID" rev 2.00/3.50 addr 4 at uhub1 port 3
configuration 1 not configured
uhidev5 at uhub1 port 4 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.03 addr 5
uhidev5: iclass 3/1
ukbd2 at uhidev5
wskbd3 at ukbd2 mux 1
wskbd3: connecting to wsdisplay0
uhidev6 at uhub1 port 4 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.03 addr 5
uhidev6: iclass 3/1, 8 report ids
uhid at uhidev6 reportid 2 not configured
uhid at uhidev6 reportid 3 not configured
uhid at uhidev6 reportid 4 not configured
uhid at uhidev6 reportid 8 not configured
uhidev7 at uhub1 port 4 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.03 addr 5
uhidev7: iclass 3/0, 33 report ids
uhid at uhidev7 reportid 16 not configured
uhid at uhidev7 reportid 17 not configured
uhid at uhidev7 reportid 32 not configured
uhid at uhidev7 reportid 33 not configured
uhub2 at uhub0 port 12 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub"
rev 3.00/90.74 addr 6
softraid0 at root
scsibus1 at softraid0: 256 targets
sd1 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 238474MB, 512 bytes/sector, 488395553 sectors
root on rd0a swap on rd0b dump on rd0b
iwm0: could not read firmware iwm-7265-16 (error 2)
iwm0: failed to load init firmware
uid 0 on /: file system full
uid 0 on /: file system full
