I'm noticing some trouble with branching in sed(1) now. Leaving the
label empty should branch to the end of the script:
[2addr]b [label]
Branch to the : function with the specified label. If the label
is not specified, branch to the end of the script.
However, in practice, when I try branching without a label, I get an
error about an undefined label instead of it branching to the end of
the script:
$ echo -e "START\nfoo\nbar\nEND\nbaz\n" | sed -n '/^START/,/^END/b;p;'
sed: 1: "/^START/,/^END/b;p;": undefined label ''
Adding a label works as expected:
$ echo -e "START\nfoo\nbar\nEND\nbaz\n" | sed -n '/^START/,/^END/ba;p;:a;
If I have not made a mistake with the short script above then there
seems to be a discrepancy between the behavior described in the manual
and the actual behavior.
dmesg below
/Lars
1 dev 0 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address
00:00:24:d1:fa:50
ukphy4 at vr4 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr5 at pci1 dev 1 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:51
ukphy5 at vr5 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr6 at pci1 dev 2 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:00:24:d1:fa:52
ukphy6 at vr6 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr7 at pci1 dev 3 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:53
ukphy7 at vr7 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ral0 at pci0 dev 17 function 0 "Ralink RT2561S" rev 0x00: irq 15,
address 00:12:0e:61:54:68
ral0: MAC/BBP RT2561C, RF RT5225
pcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH-004G>
wd0: 1-sector PIO, LBA48, 3825MB, 7835184 sectors
wd1 at pciide0 channel 0 drive 1: <ELITE PRO CF CARD 4GB>
wd1: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev
2.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbc0: unable to establish interrupt for irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev
1.00/1.00 addr 1
softraid0 at root
scsibus0 at softraid0: 256 targets
sd0 at scsibus0 targ 1 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd0: 2054MB, 512 bytes/sector, 4208128 sectors
sd1 at scsibus0 targ 2 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd1: 5181MB, 512 bytes/sector, 10610944 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
OpenBSD 6.4-current (GENERIC) #1024: Wed Nov 28 22:33:13 MST 2018
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 536363008 (511MB)
avail mem = 511528960 (487MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0: (uniprocessor)
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 500 MHz, 05-0a-02
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
mtrr: K6-family MTRR support (2 registers)
amdmsr0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
0:20:0: io address conflict 0x6100/0x100
0:20:0: io address conflict 0x6200/0x200
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:cb:a9:24
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:cb:a9:25
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:cb:a9:26
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:cb:a9:27
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ppb0 at pci0 dev 14 function 0 "TI PCI2250" rev 0x02
pci1 at ppb0 bus 1
vr4 at pci1 dev 0 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:00:24:d1:fa:50
ukphy4 at vr4 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr5 at pci1 dev 1 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:51
ukphy5 at vr5 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr6 at pci1 dev 2 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:00:24:d1:fa:52
ukphy6 at vr6 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr7 at pci1 dev 3 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:53
ukphy7 at vr7 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ral0 at pci0 dev 17 function 0 "Ralink RT2561S" rev 0x00: irq 15,
address 00:12:0e:61:54:68
ral0: MAC/BBP RT2561C, RF RT5225
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3,
32-bit 3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH-004G>
wd0: 1-sector PIO, LBA48, 3825MB, 7835184 sectors
wd1 at pciide0 channel 0 drive 1: <ELITE PRO CF CARD 4GB>
wd1: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev
2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbc0: unable to establish interrupt for irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev
1.00/1.00 addr 1
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd0: 2054MB, 512 bytes/sector, 4208128 sectors
sd1 at scsibus2 targ 2 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd1: 5181MB, 512 bytes/sector, 10610944 sectors
root on wd0a (9ea76622cbdc8473.a) swap on wd0b dump on wd0b
vr5: restarting
syncing disks... done
OpenBSD 6.4-current (RAMDISK_CD) #1018: Mon Dec 3 22:07:19 MST 2018
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
real mem = 536408064 (511MB)
avail mem = 517574656 (493MB)
mainbus0 at root
bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0: (uniprocessor)
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 500 MHz, 05-0a-02
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
0:20:0: io address conflict 0x6100/0x100
0:20:0: io address conflict 0x6200/0x200
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
"AMD Geode LX Crypto" rev 0x00 at pci0 dev 1 function 2 not configured
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:cb:a9:24
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:cb:a9:25
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:cb:a9:26
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:cb:a9:27
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ppb0 at pci0 dev 14 function 0 "TI PCI2250" rev 0x02
pci1 at ppb0 bus 1
vr4 at pci1 dev 0 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:00:24:d1:fa:50
ukphy4 at vr4 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr5 at pci1 dev 1 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:51
ukphy5 at vr5 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr6 at pci1 dev 2 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:00:24:d1:fa:52
ukphy6 at vr6 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr7 at pci1 dev 3 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:53
ukphy7 at vr7 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ral0 at pci0 dev 17 function 0 "Ralink RT2561S" rev 0x00: irq 15,
address 00:12:0e:61:54:68
ral0: MAC/BBP RT2561C, RF RT5225
pcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH-004G>
wd0: 1-sector PIO, LBA48, 3825MB, 7835184 sectors
wd1 at pciide0 channel 0 drive 1: <ELITE PRO CF CARD 4GB>
wd1: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev
2.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbc0: unable to establish interrupt for irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev
1.00/1.00 addr 1
softraid0 at root
scsibus0 at softraid0: 256 targets
sd0 at scsibus0 targ 1 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd0: 2054MB, 512 bytes/sector, 4208128 sectors
sd1 at scsibus0 targ 2 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd1: 5181MB, 512 bytes/sector, 10610944 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
OpenBSD 6.4-current (GENERIC) #1028: Mon Dec 3 21:49:53 MST 2018
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 536363008 (511MB)
avail mem = 511528960 (487MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0: (uniprocessor)
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 500 MHz, 05-0a-02
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
mtrr: K6-family MTRR support (2 registers)
amdmsr0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
0:20:0: io address conflict 0x6100/0x100
0:20:0: io address conflict 0x6200/0x200
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:cb:a9:24
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:cb:a9:25
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:cb:a9:26
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:cb:a9:27
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ppb0 at pci0 dev 14 function 0 "TI PCI2250" rev 0x02
pci1 at ppb0 bus 1
vr4 at pci1 dev 0 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:00:24:d1:fa:50
ukphy4 at vr4 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr5 at pci1 dev 1 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:51
ukphy5 at vr5 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr6 at pci1 dev 2 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:00:24:d1:fa:52
ukphy6 at vr6 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr7 at pci1 dev 3 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 6,
address 00:00:24:d1:fa:53
ukphy7 at vr7 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
ral0 at pci0 dev 17 function 0 "Ralink RT2561S" rev 0x00: irq 15,
address 00:12:0e:61:54:68
ral0: MAC/BBP RT2561C, RF RT5225
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3,
32-bit 3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH-004G>
wd0: 1-sector PIO, LBA48, 3825MB, 7835184 sectors
wd1 at pciide0 channel 0 drive 1: <ELITE PRO CF CARD 4GB>
wd1: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev
2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbc0: unable to establish interrupt for irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev
1.00/1.00 addr 1
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd0: 2054MB, 512 bytes/sector, 4208128 sectors
sd1 at scsibus2 targ 2 lun 0: <OPENBSD, SR RAID 0, 006> SCSI2 0/direct fixed
sd1: 5181MB, 512 bytes/sector, 10610944 sectors
root on wd0a (9ea76622cbdc8473.a) swap on wd0b dump on wd0b
