> From: "Ted Unangst" <[email protected]> > Date: Wed, 12 Dec 2018 00:05:33 -0500 > > Roderick wrote: > > > > libGL error: Version 4 or later of flush extension not found > > libGL error: failed to load driver i915 > > This error also occurs on an HP mini 110. It appears cosmetic. glxgears still > runs, fast enough, and firefox runs as well, somewhat less fast.
Seems this means that it'll fall back to using DRI2 instead of DRI3. Lots of Linux reports with the same issue, so this isn't an OpenBSD issue. > dmesg below. it's GM45. > > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > > OpenBSD 6.4 (GENERIC.MP) #943: Thu Oct 11 13:51:32 MDT 2018 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > real mem = 2138259456 (2039MB) > avail mem = 2084151296 (1987MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 09/02/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ > 0xfc890 (18 entries) > bios0: vendor Hewlett-Packard version "308F0 Ver. F.16" date 09/02/2009 > bios0: Hewlett-Packard HP Mini 110-1100 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET ASF! SSDT > acpi0: wakeup devices P0P2(S4) P0P1(S4) LAN2(S3) USB0(S3) USB3(S3) EUSB(S3) > MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 > GHz, 06-1c-02 > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,NXE,LAHF,PERF,SENSOR,MELTDOWN > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 133MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 > GHz, 06-1c-02 > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,NXE,LAHF,PERF,SENSOR,MELTDOWN > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 3 (P0P1) > acpiprt2 at acpi0: bus 2 (P0P5) > acpiprt3 at acpi0: bus -1 (P0P6) > acpiprt4 at acpi0: bus -1 (P0P7) > acpiprt5 at acpi0: bus -1 (P0P8) > acpiprt6 at acpi0: bus -1 (P0P9) > acpiec0 at acpi0 > acpicpu0 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: !C3(100@57 mwait.3@0x30), !C2(500@1 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 100 degC > acpicmos0 at acpi0 > "SYN1E0C" at acpi0 not configured > acpibat0 at acpi0: BAT1 model "Primary" serial type LION oem > "Hewlett-Packard" > acpiac0 at acpi0: AC unit online > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > acpibtn2 at acpi0: PWRB > acpivideo0 at acpi0: IGD_ > acpivout0 at acpivideo0: LCD_ > bios0: ROM list: 0xc0000/0xec00! > cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0: apic 2 int 16 > inteldrm0: 1024x600, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi > azalia0: codecs: IDT 92HD81B1X > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17 > pci2 at ppb1 bus 2 > alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: msi, > address 00:26:55:c6:a6:2b > atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci3 at ppb2 bus 3 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1 > ahci0: port 0: 1.5Gb/s > ahci0: PHY offline on port 2 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MJA2160B, 8919> SCSI3 0/direct > fixed naa.500000e043efec9f > sd0: 152627MB, 512 bytes/sector, 312581808 sectors > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa00000 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > uvideo0 at uhub0 port 4 configuration 1 interface 0 "Alcor Micro, Corp. USB > 2.0 PC Camera" rev 2.00/0.05 addr 2 > video0 at uvideo0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (e58523d57273d10b.a) swap on sd0b dump on sd0b > >
