Same problem on Del Inspiron 3721 сб, 2 февр. 2019 г. в 22:08, Moritz Messner <[email protected]>:
> SENDBUG: -*- sendbug -*- > SENDBUG: Lines starting with `SENDBUG' will be removed automatically. > SENDBUG: > SENDBUG: Choose from the following categories: > SENDBUG: > SENDBUG: system user library documentation kernel alpha amd64 arm hppa > i386 m88k mips64 powerpc sh sparc sparc64 vax > SENDBUG: > SENDBUG: > To: [email protected] > Subject: 6.4 fails to load the gpu driver correctly > From:[email protected] > Cc:[email protected] > Reply-To: [email protected] > > > >Synopsis: Since upgrading to 6.4 (and during subsequent reinstalls) > the gpu driver fails when booting up, therefore X doesn't work either > >Category: system, amd64 > >Environment: > System : OpenBSD 6.4 > Details : OpenBSD 6.4 (GENERIC.MP) #3: Thu Dec 20 19:19:32 > CET 2018 > [email protected]: > /usr/src/sys/arch/amd64/compile/GENERIC.MP > > Architecture: OpenBSD.amd64 > Machine : amd64, HP EliteBook 8530 > >Description: > When booting the machnine, the gpu driver is loaded and for a very > short time works (normal sized text in the tty and many lines fit) > After this, it goes back to the 80x28 text mode, just like the > early stages of booting. Because of this X doesn't work, because > it can't find any screens. > >How-To-Repeat: > Install OpenBSD 6.4 (I chose simple options, auto partition layout, > one user besides root, ...) and boot the machine. This has only > happened yet with 6.4, 6.3 worked perfectly fine. Also I think it > only occured with my specific laptop and gpu chip. > >Fix: > None yet found. > > >Else: > Tell me if I made any mistakes or should provide more information. > > > SENDBUG: dmesg, pcidump, acpidump and usbdevs are attached. > SENDBUG: Feel free to delete or use the -D flag if they contain sensitive > information. > > dmesg: > OpenBSD 6.4 (GENERIC.MP) #3: Thu Dec 20 19:19:32 CET 2018 > [email protected]:/usr/src/sys/arch/amd64/compile/ > GENERIC.MP > real mem = 4273475584 (4075MB) > avail mem = 4134682624 (3943MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xbfdc4000 (21 entries) > bios0: vendor Hewlett-Packard version "68PDV Ver. F.04" date 09/26/2008 > bios0: Hewlett-Packard HP EliteBook 8530p > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC MCFG ASF! TCPA SSDT SLIC SSDT DMAR SSDT > SSDT SSDT > acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) > ECF0(S5) RP05(S5) ECF0(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) > USB5(S3) USB6(S3) U6RM(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.56 MHz, 06-17-06 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > cpu0: apic clock running at 265MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz, 06-17-06 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > cpu1: 3MB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 1 (PEGP) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus 3 (RP02) > acpiprt3 at acpi0: bus 4 (RP03) > acpiprt4 at acpi0: bus 69 (RP05) > acpiprt5 at acpi0: bus 134 (PCIB) > acpiprt6 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: !C3(100@162 mwait.3@0x50), !C2(500@1 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: !C3(100@162 mwait.3@0x50), !C2(500@1 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: APPR, resource for HDEF > acpipwrres1 at acpi0: COMP, resource for COM1 > acpipwrres2 at acpi0: LPP_, resource for LPT0 > acpipwrres3 at acpi0: PGF0, resource for FANG > acpitz0 at acpi0: critical temperature is 115 degC > acpitz1 at acpi0: critical temperature is 105 degC > acpitz2 at acpi0: critical temperature is 112 degC > acpitz3 at acpi0: critical temperature is 112 degC > acpitz4 at acpi0: critical temperature is 90 degC > acpitz5 at acpi0: critical temperature is 112 degC > tpm0 at acpi0: GTPM addr 0xfed40000/0x5000: Infineon SLB9635 1.2 rev 0x10 > acpicmos0 at acpi0 > "PNP0A06" at acpi0 not configured > "SYN0144" at acpi0 not configured > "HPQ0004" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "Primary" serial 12563 2016/03/28 type LIon > oem "Hewlett-Packard" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit offline > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > "HPQ0006" at acpi0 not configured > "PNP0C32" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpivideo0 at acpi0: DGFX > acpivout0 at acpivideo0: LCD_ > cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: msi > pci1 at ppb0 bus 1 > 1:0:0: mem address conflict 0xfffe0000/0x20000 > radeondrm0 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00 > drm0 at radeondrm0 > radeondrm0: msi > azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 3600 HD Audio" rev 0x00: > msi > azalia0: no supported codecs > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, > address 00:23:7d:00:a7:24 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi > azalia1: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using Analog > Devices AD1984A > audio0 at azalia1 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi > pci3 at ppb2 bus 3 > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO > 3T3R, MoW, address 00:16:ea:60:75:1e > ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi > pci5 at ppb4 bus 69 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci6 at ppb5 bus 134 > "Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured > sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22 > sdhc0: SDHC 1.0, 33 MHz base clock > sdmmc0 at sdhc0: 4-bit > "Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured > "Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured > "Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured > cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 > ahci0: port 0: 3.0Gb/s > ahci0: port 1: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct > fixed naa.5002538d428f67fe > sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI > 5/cdrom removable > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.0, 0x1c0b1 0xb00000 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > "RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 > function 0 not configured > ugen0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 > addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (bbca93d3559dae52.a) swap on sd0b dump on sd0b > initializing kernel modesetting (RV635 0x1002:0x9591 0x103C:0x30E7). > Invalid ATI magic. > drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init > [TTM] Memory type 2 has not been initialized > drm0 detached > radeondrm0 detached > vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > usbdevs: > Controller /dev/usb0: > addr 01: 8086:0000 Intel, EHCI root hub > high speed, self powered, config 1, rev 1.00 > driver: uhub0 > Controller /dev/usb1: > addr 01: 8086:0000 Intel, EHCI root hub > high speed, self powered, config 1, rev 1.00 > driver: uhub1 > Controller /dev/usb2: > addr 01: 8086:0000 Intel, UHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub2 > addr 02: 03f0:171d Broadcom Corp, HP Integrated Module > full speed, self powered, config 1, rev 1.00 > driver: ugen0 > Controller /dev/usb3: > addr 01: 8086:0000 Intel, UHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub3 > Controller /dev/usb4: > addr 01: 8086:0000 Intel, UHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub4 > Controller /dev/usb5: > addr 01: 8086:0000 Intel, UHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub5 > Controller /dev/usb6: > addr 01: 8086:0000 Intel, UHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub6 > Controller /dev/usb7: > addr 01: 8086:0000 Intel, UHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub7 > -- Dmitry Orlov
