> Synopsis: Clevo W840-SU Laptop: suspend / hibernate fails
> Category: amd64
> Environment:

System : OpenBSD 6.5
Details : OpenBSD 6.5-beta (GENERIC.MP) #806: Mon Mar 18 23:24:02 MDT 2019
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

Architecture: OpenBSD.amd64
Machine : amd64

> Description:

1) suspend to ram "zzz":
* System seems to suspend to ram, but after a short moment it wakes up again.
* Thereafter there is a kernel thread "acpid0" consuming %50 of cpu0. (see log 
further below)
* Attempts to kill the process have failed (kill -9)

2) hibernate "ZZZ":
* Monitor goes blank (but not off), but nothing more happens
* No response to keyboard interaction

I tested both cases with xenodem started under X, and with X on plain console
with same result. Hence not attaching /var/log/Xorg.0.log yet.

> How-To-Repeat:

install -current on Clevo W840-SU, rcctl start apmd, execute zzz / ZZZ

> Fix:

unknown

> Logs:

apmd debug during zzz fail (auto resume):
# apmd -d 
battery status: high. external power status: connected. estimated battery life 
can't disable driver messages, error: Inappropriate ioctl for device
apmevent 0000 index 0
apmevent 0006 index 22
do_etc_file(): cannot access file /etc/apm/powerup
apmevent 0006 index 23
system suspending
battery status: high. external power status: connected. estimated battery life 
92%
/etc/apm/suspend exited with status 0
apmevent 0003 index 24
do_etc_file(): cannot access file /etc/apm/resume
system resumed from sleep
battery status: high. external power status: connected. estimated battery life 
92%
apmevent 0006 index 30
apmevent 0006 index 33

after zzz "auto" resume:
$ top -SI 
load averages: 0.98, 0.54, 0.24 xxx.yyy 19:00:30
57 processes: 1 running, 52 idle, 4 on processor up 0:07
CPU0 states: 0.6% user, 0.0% nice, 32.0% sys, 3.0% spin, 23.2% intr, 41.1% idle
CPU1 states: 0.6% user, 0.0% nice, 2.1% sys, 0.4% spin, 0.0% intr, 96.9% idle
Memory: Real: 22M/645M act/tot Free: 15G Cache: 376M Swap: 0K/16G
PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
42368 root 10 0 0K 9516K onproc/0 - 2:25 56.84% acpi0

dmesg:
OpenBSD 6.5-beta (GENERIC.MP) #806: Mon Mar 18 23:24:02 MDT 2019
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17045577728 (16255MB)
avail mem = 16518680576 (15753MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb500 (35 entries)
bios0: vendor American Megatrends Inc. version "4.6.5" date 11/21/2013
bios0: Notebook W840SU Series
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT ASF! SSDT SSDT SSDT MCFG HPET SSDT SSDT DMAR 
CSRT
acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) 
RP04(S4) PXSX(S4)
PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 2793.90 MHz, 06-45-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,
SE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SS
4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITS
,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 2793.54 MHz, 06-45-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,
SE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SS
4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITS
,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 2793.53 MHz, 06-45-01
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,
SE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SS
4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITS
,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 2793.53 MHz, 06-45-01
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,
SE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SS
4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITS
,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP03)
acpiprt3 at acpi0: bus 3 (RP04)
acpiprt4 at acpi0: bus -1 (P0P2)
acpiprt5 at acpi0: bus -1 (P0PA)
acpiprt6 at acpi0: bus -1 (P0PB)
acpiprt7 at acpi0: bus -1 (PEG0)
acpiprt8 at acpi0: bus -1 (PEG1)
acpiprt9 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), 
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), 
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), 
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), 
C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 120 degC
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
"PNPC000" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "BAT" serial 0001 type LION oem "Notebook"
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 
1900, 1800, 1600,
1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek ALC282
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 18
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 08:3e:8e:d0:7b:31
ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
rtsx0 at pci3 dev 0 function 0 "Realtek RTL8411B Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
re0 at pci3 dev 0 function 1 "Realtek 8168" rev 0x12: RTL8411B (0x5c80), msi, 
address
80:fa:5b:08:66:84
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3 0/direct fixed
naa.50025385a01ccb8c
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
ugen0 at uhub0 port 5 "Foxconn product 0xe027" rev 1.10/0.01 addr 2
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 244190MB, 512 bytes/sector, 500102858 sectors
root on sd1a (8e1f55d9ac8dbdd8.a) swap on sd1b dump on sd1b

usbdevs:
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
addr 02: 0489:e027 Foxconn, product 0xe027
full speed, self powered, config 1, rev 0.01
driver: ugen0
Controller /dev/usb1:
addr 01: 8086:0000 Intel, EHCI root hub
high speed, self powered, config 1, rev 1.00
driver: uhub1
addr 02: 8087:8000 Intel, Rate Matching Hub
high speed, self powered, config 1, rev 0.04
driver: uhub2

Reply via email to