Hi Karel,
The changed that broke it has been reverted[0].
Got bitten by it yesterday myself.
This should get it working:
# rm -fr /tmp/.sysupgrade.*
# sysupgrade -n
# mv /tmp/.sysupgrade.*/* /home/_sysupgrade
The following snapshot won't be affected.
[0] https://marc.info/?l=openbsd-cvs&m=155784408317389&w=2
Regards,
Raf
On Wed, May 15, 2019 at 08:48:30AM BST, Karel Gardas wrote:
> Hello,
>
> just to report that today's snapshot obtained by sysupgrade tool from
> ftp.spline.de is not supporting fully automatic upgrade. The ramdisk
> kernel's upgrade process was stuck on classical question
> install/upgrade/whatever as used when automatic upgrade is not performed.
> Dmesg reports those builds:
>
> thinkpad$ dmesg|grep OpenBSD
> OpenBSD 6.5-current (GENERIC.MP) #17: Sun May 12 00:53:38 MDT 2019
> OpenBSD 6.5-current (RAMDISK_CD) #18: Mon May 13 19:24:53 MDT 2019
> OpenBSD 6.5-current (GENERIC.MP) #18: Mon May 13 19:17:43 MDT 2019
>
> Full dmesg attached.
>
> Thanks,
> Karel
>
> OpenBSD 6.5-current (GENERIC.MP) #17: Sun May 12 00:53:38 MDT 2019
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8461684736 (8069MB)
> avail mem = 8195149824 (7815MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
> bios0: vendor LENOVO version "6FET61WW (2.07 )" date 02/13/2009
> bios0: LENOVO 224362G
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
> DMAR SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4)
> EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3)
> HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.34 MHz, 06-17-0a
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> cpu0: apic clock running at 265MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.01 MHz, 06-17-0a
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> cpu1: 3MB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpicmos0 at acpi0
> tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x10208086 rev 0x6
> acpibat0 at acpi0: BAT0 model "42T4619" serial 732 type LION oem "SANYO"
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "PNP0C14" at acpi0 not configured
> acpidock0 at acpi0: GDCK not docked (0)
> acpivideo0 at acpi0: VID_
> acpivout0 at acpivideo0: LCD0
> acpivideo1 at acpi0: VID_
> cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> drm0 at inteldrm0
> intagp0 at inteldrm0
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0: apic 1 int 16
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
> 00:22:68:0a:32:65
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO
> 1T2R, MoW, address 00:22:fa:95:21:e0
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> pci4 at ppb3 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> sdhc0: SDHC 1.0, 33 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
> "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 3.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> SCSI3 0/direct
> fixed naa.50014ee603668b6e
> sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
> sd1 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct
> fixed naa.5002538d40b0ca9b
> sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> vmm0 at mainbus0: VMX (using slow L1TF mitigation)
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
> Ltd. product 0x4807" rev 2.00/31.34 addr 2
> video0 at uvideo0
> ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> free with zero size: (127)
> uhidev0: iclass 3/1
> free with zero size: (127)
> free with zero size: (127)
> free with zero size: (127)
> free with zero size: (127)
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> uhidev1: iclass 3/1, 8 report ids
> ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
> uhidev2 at uhub5 port 2 configuration 1 interface 2 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> uhidev2: iclass 3/0, 33 report ids
> uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
> uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
> uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
> uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd1a (198aaa50df369cc0.a) swap on sd1b dump on sd1b
> inteldrm0: 1280x800, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> syncing disks... done
> rebooting...
> OpenBSD 6.5-current (RAMDISK_CD) #18: Mon May 13 19:24:53 MDT 2019
> [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 8461684736 (8069MB)
> avail mem = 8201261056 (7821MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
> bios0: vendor LENOVO version "6FET61WW (2.07 )" date 02/13/2009
> bios0: LENOVO 224362G
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
> DMAR SSDT SSDT SSDT
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.33 MHz, 06-17-0a
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: apic clock running at 266MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> acpicpu at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpitz at acpi0 not configured
> acpitz at acpi0 not configured
> "PNP0C0D" at acpi0 not configured
> "PNP0C0E" at acpi0 not configured
> acpicmos0 at acpi0
> "INTC0102" at acpi0 not configured
> "PNP0C0A" at acpi0 not configured
> "ACPI0003" at acpi0 not configured
> "IBM0068" at acpi0 not configured
> "PNP0A08" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
> 00:22:68:0a:32:65
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO
> 1T2R, MoW, address 00:22:fa:95:21:e0
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> pci4 at ppb3 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> sdhc0: SDHC 1.0, 33 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
> "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> pcmcia0 at cardslot0
> "Intel 82801IEM LPC" rev 0x03 at pci0 dev 31 function 0 not configured
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 3.0Gb/s
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> SCSI3 0/direct
> fixed naa.50014ee603668b6e
> sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
> sd1 at scsibus0 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct
> fixed naa.5002538d40b0ca9b
> sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
> "Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at mainbus0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay1
> "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 at uhub0
> port 6 not configured
> "vendor 0x08ff Fingerprint Sensor" rev 2.00/17.03 addr 2 at uhub3 port 1 not
> configured
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay1
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> uhidev1: iclass 3/1, 8 report ids
> uhid at uhidev1 reportid 2 not configured
> uhid at uhidev1 reportid 3 not configured
> uhid at uhidev1 reportid 4 not configured
> uhid at uhidev1 reportid 8 not configured
> uhidev2 at uhub5 port 2 configuration 1 interface 2 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> uhidev2: iclass 3/0, 33 report ids
> uhid at uhidev2 reportid 16 not configured
> uhid at uhidev2 reportid 17 not configured
> uhid at uhidev2 reportid 32 not configured
> uhid at uhidev2 reportid 33 not configured
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> syncing disks... done
> rebooting...
> OpenBSD 6.5-current (GENERIC.MP) #18: Mon May 13 19:17:43 MDT 2019
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8461684736 (8069MB)
> avail mem = 8195141632 (7815MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
> bios0: vendor LENOVO version "6FET61WW (2.07 )" date 02/13/2009
> bios0: LENOVO 224362G
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA
> DMAR SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4)
> EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3)
> HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.33 MHz, 06-17-0a
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> cpu0: apic clock running at 265MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz, 06-17-0a
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> cpu1: 3MB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpicmos0 at acpi0
> tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x10208086 rev 0x6
>
> acpibat0 at acpi0: BAT0 model "42T4619" serial 732 type LION oem "SANYO"
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "PNP0C14" at acpi0 not configured
> acpidock0 at acpi0: GDCK not docked (0)
> acpivideo0 at acpi0: VID_
> acpivout0 at acpivideo0: LCD0
> acpivideo1 at acpi0: VID_
> cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> drm0 at inteldrm0
> intagp0 at inteldrm0
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0: apic 1 int 16
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
> 00:22:68:0a:32:65
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO
> 1T2R, MoW, address 00:22:fa:95:21:e0
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> pci4 at ppb3 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> sdhc0: SDHC 1.0, 33 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
> "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 3.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> SCSI3 0/direct
> fixed naa.50014ee603668b6e
> sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
> sd1 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct
> fixed naa.5002538d40b0ca9b
> sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> vmm0 at mainbus0: VMX (using slow L1TF mitigation)
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
> Ltd. product 0x4807" rev 2.00/31.34 addr 2
> video0 at uvideo0
> ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> free with zero size: (127)
> uhidev0: iclass 3/1
> free with zero size: (127)
> free with zero size: (127)
> free with zero size: (127)
> free with zero size: (127)
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> uhidev1: iclass 3/1, 8 report ids
> ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
> uhidev2 at uhub5 port 2 configuration 1 interface 2 "Logitech USB Receiver"
> rev 2.00/24.01 addr 2
> uhidev2: iclass 3/0, 33 report ids
> uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
> uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
> uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
> uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd1a (198aaa50df369cc0.a) swap on sd1b dump on sd1b
> inteldrm0: 1280x800, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
