------------------------------------------------------------------------ *De :* Stuart Henderson <[email protected]> *Objet :* dual pppoe problem *Date :* dimanche 16 juin 2019 à 21:30 *Pour :* Sacha <[email protected]> *Cc :* [email protected]
> On 2019/06/16 10:33, Sacha wrote: >> Hi, >> >> when I'm starting the system (OpenBSD 6.5 amd64) with dual pppoe connections >> only the first is going up. >> >> Here are my pppoe confs (changed $user and $psw): > Your config is not included in the email. Sorry: cerbere# cat /etc/hostname.pppoe0 inet 0.0.0.0 255.255.255.255 NONE \ pppoedev em0 authproto pap \ authname '$user1' authkey '$psw1' up dest 0.0.0.1 !/sbin/route add default -ifp pppoe0 0.0.0.1 cerbere# cat /etc/hostname.pppoe1 inet 0.0.0.0 255.255.255.255 NONE \ pppoedev em1 authproto pap \ authname '$use2' authkey '$psw2' up dest 0.0.0.1 > >> I tried to change 0.0.0.0 to 0.0.0.2 in /etc/hostname.pppoe1, > Why? > > From the manual pppoe(4) : > > " If the local address is set to wildcard address 0.0.0.0, it will be > changed > " to an address suggested by the peer. > > You want 0.0.0.0 on both interfaces. It is the "remote address" (0.0.0.1 on > the > first interface) that you need to change for the second. > It was a try as previous conf didn't worked. Sacha.
