On Fri, Sep 06, 2019 at 12:11:24PM +0200, Mark Kettenis wrote:
>
> What happens if you disable acpipci(4) when booting bsd.rd?
It just boots fine.
I tested booting bsd.rd, and also a GENERIC.MP. Both are fine.
Below a full dmesg of GENERIC.MP with acpipci* disabled.
--
Sebastien Marie
OpenBSD 6.6-beta (GENERIC.MP) #53: Fri Sep 6 11:50:06 CEST 2019
[email protected]:/sys/arch/amd64/compile/GENERIC.MP
real mem = 4141871104 (3949MB)
avail mem = 3966578688 (3782MB)
User Kernel Config
UKC> disable acpipci*
444 acpipci* disabled
UKC> exit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (80 entries)
bios0: vendor Dell Inc. version "A22" date 06/11/2012
bios0: Dell Inc. OptiPlex 755
acpi0 at bios0
acpi0: TCPA checksum error: ACPI 3.0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET TCPA DMAR SLIC SSDT SSDT
SSDT
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2660.41 MHz, 06-0f-0b
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,MELTDOWN
cpu0: 4MB 64b/line 16-way L2 cache
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 1 (application processor)
TSC skew=-8
cpu1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2660.01 MHz, 06-0f-0b
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,MELTDOWN
cpu1: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpimcfg0: addr 0x38000000080000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (PCI4)
acpiprt2 at acpi0: bus 2 (PCI2)
acpiprt3 at acpi0: bus -1 (PCI3)
acpiprt4 at acpi0: bus 1 (PCI1)
acpiprt5 at acpi0: bus -1 (PCI5)
acpiprt6 at acpi0: bus -1 (PCI6)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpibtn0 at acpi0: VBTN
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2667, 2333, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82Q35 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 2400 Pro" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 8 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel 82Q35 KT" rev 0x02: ports: 16 com
com4 at puc0 port 0 apic 8 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: msi, address
00:1e:4f:f4:e8:50
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 8 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 8 int 17
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 8 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1984
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 8 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 8 int 17
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 8 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 8 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci3 at ppb2 bus 3
sis0 at pci3 dev 2 function 0 "NS DP83815" rev 0x00, DP83816A: apic 8 int 18,
address 00:0f:b5:42:59:c0
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
pcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST3160815AS, 3.AD> SCSI3 0/direct fixed
t10.ATA_ST3160815AS_9RX7BKBD
sd0: 152587MB, 512 bytes/sector, 312500000 sectors
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVD+-RW GSA-H73N, B103> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 8 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
vmm0 at mainbus0: VMX (using slow L1TF mitigation)
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard"
rev 1.10/3.52 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Dell Dell Premium USB
Optical Mouse" rev 2.00/29.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f1307242b412e6c8.a) swap on sd0b dump on sd0b
initializing kernel modesetting (RV610 0x1002:0x94C3 0x1028:0x0402 0x00).
drm:pid0:r600_init *ERROR* Expecting atombios for R600 GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm0 detached
radeondrm0 detached
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 2400 Pro" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
