Hello,
[email protected] (Jonathan Gray), 2019.09.08 (Sun) 15:53 (CEST):
> On Sun, Sep 08, 2019 at 02:53:31PM +0200, Marcus MERIGHI wrote:
> > [email protected] (Jonathan Gray), 2019.09.08 (Sun) 04:05 (CEST):
> > > Previously the drm code faked a 1024x768 fb if nothing was connected.
> > >
> > > Now there is a deferred setup path, but we don't handle doing
> > > rasops_init()/wsdisplay_cnattach() in that at the moment. Given it is
> > > hotplug driven it would have to be able to safely teardown/detach the
> > > console as well.
> >
> > What I understand from the above is that it was known to work formerly,
> > is known _not_ to work nowadays and would be non-trivial to fix.
> >
> Here is a partial revert of
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ca91a2758fcef6635626993557dd51cfbb6dd134
>
> to go back to the old behaviour. I have only tested this with amdgpu
> currently.
Works with inteldrm(4) as well!
Thanks!
Marcus
OpenBSD 6.6-beta (GENERIC.MP) #1: Sun Sep 8 16:26:06 CEST 2019
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16035282944 (15292MB)
avail mem = 15536603136 (14816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec2f0 (82 entries)
bios0: vendor American Megatrends Inc. version "1.06" date 03/04/2015
bios0: Shuttle Inc. DS57U
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI SSDT ASF! SLIC SSDT
SSDT SSDT DMAR
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2494.65 MHz, 06-3d-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
tsc_timecounter_init: TSC skew=0 observed drift=0
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
TSC skew=-2
cpu1: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2494.24 MHz, 06-3d-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
tsc_timecounter_init: TSC skew=-2 observed drift=0
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus 2 (RP03)
acpiprt7 at acpi0: bus 3 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(500@67 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(500@67 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: FN00, resource for FAN0
acpipwrres4 at acpi0: FN01, resource for FAN1
acpipwrres5 at acpi0: FN02, resource for FAN2
acpipwrres6 at acpi0: FN03, resource for FAN3
acpipwrres7 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2201, 2200, 2100, 2000, 1800, 1700,
1600, 1500, 1300, 1200, 1100, 1000, 900, 700, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
80:ee:73:ae:e5:56
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC662
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address
80:ee:73:ae:e5:55
ppb2 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 3
rtwn0 at pci3 dev 0 function 0 "Realtek 8188EE" rev 0x01: msi
rtwn0: MAC/BB RTL8188EE, RF 6052 1T1R, address 4c:bb:58:9a:3a:5d
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TS8GMSM610, 2013>
t10.ATA_TS8GMSM610_A93797112253B1000021
sd0: 7641MB, 512 bytes/sector, 15649200 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, MKNSSDCR120GB-7, 603A> naa.588891410003fc76
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa40
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 3 configuration 1 interface 0 "MemsArt MA144 RF
Controller" rev 1.10/1.20 addr 2
uhidev0: iclass 3/1, 4 report ids
uhid0 at uhidev0 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev0 reportid 2: input=2, output=0, feature=0
ukbd0 at uhidev0 reportid 3: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
ums0 at uhidev0 reportid 4: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub2 at uhub0 port 5 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/85.37 addr 3
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB Storage" rev
2.00/94.54 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9454> removable
sd2: 477MB, 512 bytes/sector, 977920 sectors, readonly
umass1 at uhub0 port 13 configuration 1 interface 0 "Western Digital My Book
1230" rev 3.00/10.65 addr 5
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd3 at scsibus3 targ 1 lun 0: <WD, My Book 1230, 1065>
sd3: 3815415MB, 4096 bytes/sector, 976746240 sectors
ses0 at scsibus3 targ 1 lun 1: <WD, SES Device, 1065>
ses0: unable to read enclosure configuration
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.03 addr 2
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd4 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd4: 74347MB, 512 bytes/sector, 152263569 sectors
root on sd1a (99cc7b789fff8e5c.a) swap on sd1b dump on sd1b
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
