Hello,
Thanks to the kind and quick work of Kevin Lo, the dock is now working
with the ure(4) driver.
# dmesg | grep ure
ure0 at uhub5 port 3 configuration 1 interface 0 "Lenovo OneLink+ Giga" rev
3.00/30.01 addr 12
ure0: RTL8153 (0x5c20), address 00:50:b6:90:e0:01
rgephy0 at ure0 phy 0: RTL8251 PHY, rev. 0
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
index 4 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
iwm0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr b8:8a:60:db:b4:74
index 1 priority 4 llprio 3
trunk: trunkdev trunk0
groups: wlan
media: IEEE802.11 autoselect (HT-MCS10 mode 11n)
status: active
ieee80211: join Livebox-7168 chan 136 bssid 34:8a:ae:27:71:69 86%
wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 54:ee:75:b2:5a:18
index 2 priority 0 llprio 3
media: Ethernet autoselect (none)
status: no carrier
enc0: flags=0<>
index 3 priority 0 llprio 3
groups: enc
status: active
ure0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:50:b6:90:e0:01
index 5 priority 0 llprio 3
media: Ethernet autoselect (1000baseT
full-duplex,master,rxpause,txpause)
status: active
trunk0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
lladdr b8:8a:60:db:b4:74
index 6 priority 0 llprio 3
trunk: trunkproto failover
iwm0 port master,active
groups: trunk egress
media: Ethernet autoselect
status: active
inet 192.168.1.24 netmask 0xffffff00 broadcast 192.168.1.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
index 7 priority 0 llprio 3
groups: pflog
Regards
--
David
