Good Morning Mikolaj, I have the same message in Xorg.0.log on my Pinebook Pro, ever since I have it. It's a known bug for the Pinebook Pro.
A second attempt at starting xenodm(1) succeeds for me. Marcus [email protected] (Mikolaj Kucharski), 2020.03.26 (Thu) 21:05 (CET): > >Synopsis: Xorg crash with can't switch keyboard to raw mode. Enable > >support for it in the kernel > >Category: arm kernel > >Environment: > System : OpenBSD 6.6 > Details : OpenBSD 6.6-current (GENERIC.MP) #522: Wed Mar 25 > 14:03:43 MDT 2020 > > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > > Architecture: OpenBSD.arm64 > Machine : arm64 > >Description: > Unable to start X11. Problem started after upgrade to recent snapshot, > I forgot to note when > I had last time working X11 on this Pinebook. This machine is following > -current, so upgrade > was from a snapshot to more recent snapshot. I'm inlining Xorg.log at > the end of the email. > I don't have anything special in /etc/X11/xorg.conf(.d): > > # find /etc/X11/xorg.conf* -type f -exec cat '{}' + > # /etc/X11/xorg.conf.d/75-fonts.conf > > Section "Files" > FontPath "/usr/local/share/fonts/spleen" > EndSection > > >How-To-Repeat: > Enable xenodm on boot up, upgrade system as usual, boot up system, Xorg > crashes: > > [ 77.562] (II) XINPUT: Adding extended input device "/dev/wskbd" > (type: KEYBOARD, id 6) > [ 77.564] (EE) KbdOn: tcsetattr: Inappropriate ioctl for device > [ 77.564] (EE) > Fatal server error: > [ 77.564] (EE) can't switch keyboard to raw mode. Enable support for > it in the kernel > > >Fix: > Unknown > > > dmesg: > OpenBSD 6.6-current (GENERIC.MP) #522: Wed Mar 25 14:03:43 MDT 2020 > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > real mem = 2015850496 (1922MB) > avail mem = 1923846144 (1834MB) > mainbus0 at root: Pinebook > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 512KB 64b/line 16-way L2 cache > efi0 at mainbus0: UEFI 2.7 > efi0: Das U-Boot rev 0x20190400 > apm0 at mainbus0 > psci0 at mainbus0: PSCI 0.2 > "osc24M_clk" at mainbus0 not configured > "osc32k_clk" at mainbus0 not configured > "internal-osc-clk" at mainbus0 not configured > "sound_spdif" at mainbus0 not configured > "spdif-out" at mainbus0 not configured > agtimer0 at mainbus0: tick rate 24000 KHz > simplebus0 at mainbus0: "soc" > sxisyscon0 at simplebus0 > sxisid0 at simplebus0 > sxiccmu0 at simplebus0 > sxipio0 at simplebus0: 103 pins > ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller" > sxirtc0 at simplebus0 > sxiccmu1 at simplebus0 > sxipio1 at simplebus0: 13 pins > sxirsb0 at simplebus0 > axppmic0 at sxirsb0 addr 0x3a3: AXP803 > "de2" at simplebus0 not configured > "dma-controller" at simplebus0 not configured > "lcd-controller" at simplebus0 not configured > "lcd-controller" at simplebus0 not configured > sximmc0 at simplebus0 > sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma > sximmc1 at simplebus0 > sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma > sximmc2 at simplebus0 > sdmmc2 at sximmc2: 8-bit, sd high-speed, mmc high-speed, dma > "phy" at simplebus0 not configured > ehci0 at simplebus0 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at simplebus0: version 1.0 > ehci1 at simplebus0 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci1 at simplebus0: version 1.0 > com0 at simplebus0sxiccmu_ccu_reset: 0x0000002e > : ns16550, no working fifo > sxipwm0 at simplebus0 > "hdmi-phy" at simplebus0 not configured > "interrupt-controller" at simplebus0 not configured > sxitwi0 at simplebus0 > iic0 at sxitwi0 > "analogix,anx6345" at iic0 addr 0x38 not configured > sxidog0 at simplebus0 > gpio0 at sxipio0: 32 pins > gpio1 at sxipio0: 32 pins > gpio2 at sxipio0: 32 pins > gpio3 at sxipio0: 32 pins > gpio4 at sxipio0: 32 pins > gpio5 at sxipio0: 32 pins > gpio6 at sxipio0: 32 pins > gpio7 at sxipio0: 32 pins > gpio8 at sxipio1: 32 pins > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > "regulator" at mainbus0 not configured > pwmbl0 at mainbus0 > "gpio_keys" at mainbus0 not configured > "vcc3v3" at mainbus0 not configured > "wifi_pwrseq" at mainbus0 not configured > "binman" at mainbus0 not configured > simplefb0 at mainbus0: 1920x1080, 32bpp > wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4 > cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu1: 512KB 64b/line 16-way L2 cache > cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4 > cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu2: 512KB 64b/line 16-way L2 cache > cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4 > cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu3: 512KB 64b/line 16-way L2 cache > manufacturer 0x024c, product 0xb703 at sdmmc1 function 1 not configured > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SR256, 0080> removable > sd0: 244016MB, 512 bytes/sector, 499744768 sectors > scsibus1 at sdmmc2: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <Samsung, AJTD4R, 0000> removable > sd1: 14910MB, 512 bytes/sector, 30535680 sectors > uhub4 at uhub1 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/88.32 addr 2 > uhidev0 at uhub4 port 1 configuration 1 interface 0 "HAILUCK CO.,LTD USB > KEYBOARD" rev 1.10/1.00 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub4 port 1 configuration 1 interface 1 "HAILUCK CO.,LTD USB > KEYBOARD" rev 1.10/1.00 addr 3 > uhidev1: iclass 3/0, 9 report ids > ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5 > uhid3 at uhidev1 reportid 6: input=0, output=0, feature=255 > uhid4 at uhidev1 reportid 9: input=1, output=0, feature=0 > urtwn0 at uhub4 port 2 configuration 1 interface 0 "Realtek 802.11n WLAN > Adapter" rev 2.00/2.00 addr 4 > urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 80:1f:02:4b:6a:6b > uvideo0 at uhub4 port 3 configuration 1 interface 0 "Generic USB2.0 PC > CAMERA" rev 2.00/1.00 addr 5 > video0 at uvideo0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > bootfile: sd0a:/bsd > boot device: sd0 > root on sd1a (1440dafaca0ef42a.a) swap on sd1b dump on sd1b > urtwn0: INIT -> SCAN > urtwn0: begin active scan > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 2 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 3 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 4 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 5 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 6 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 7 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 8 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 9 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 10 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 11 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 12 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 13 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 14 mode auto > urtwn0: SCAN -> SCAN > urtwn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 1 mode auto > urtwn0: end active scan > urtwn0: - 00:1d:7e:ec:23:c8 11 +174 54M ess no! rsn! "linksys"! > urtwn0: + 04:f0:21:34:e4:23 13 +198 54M ess privacy rsn "net_092382" > urtwn0: - 4c:ed:fb:d2:44:7c 12 +182 54M ess privacy rsn "b242"! > urtwn0: - 68:d4:82:79:02:2d 11 +174 54M ess privacy rsn "INEA-2D3B"! > urtwn0: - 80:3e:48:c6:fd:81 6 +162 54M ess privacy rsn > "INEA-D4C9_2.4G"! > urtwn0: - ec:08:6b:ce:09:5c 5 +166 54M ess privacy rsn > "TP-LINK_CE095D"! > urtwn0: - fc:f5:28:f8:6b:1a 1 +166 54M ess privacy rsn! "ZyXEL"! > urtwn0: SCAN -> AUTH > urtwn0: sending auth to 04:f0:21:34:e4:23 on channel 13 mode 11g > urtwn0: AUTH -> ASSOC > urtwn0: sending assoc_req to 04:f0:21:34:e4:23 on channel 13 mode 11g > urtwn0: ASSOC -> RUN > urtwn0: associated with 04:f0:21:34:e4:23 ssid "net_092382" channel 13 start > 54Mb short preamble short slot time > urtwn0: missed beacon threshold set to 30 beacons, beacon interval is 100 TU > urtwn0: received msg 1/4 of the 4-way handshake from 04:f0:21:34:e4:23 > urtwn0: sending msg 2/4 of the 4-way handshake to 04:f0:21:34:e4:23 > urtwn0: received msg 1/4 of the 4-way handshake from 04:f0:21:34:e4:23 > urtwn0: sending msg 2/4 of the 4-way handshake to 04:f0:21:34:e4:23 > urtwn0: received msg 1/4 of the 4-way handshake from 04:f0:21:34:e4:23 > urtwn0: sending msg 2/4 of the 4-way handshake to 04:f0:21:34:e4:23 > urtwn0: RUN -> AUTH > urtwn0: sending auth to 04:f0:21:34:e4:23 on channel 13 mode 11g > urtwn0: AUTH -> ASSOC > urtwn0: sending assoc_req to 04:f0:21:34:e4:23 on channel 13 mode 11g > urtwn0: ASSOC -> RUN > urtwn0: associated with 04:f0:21:34:e4:23 ssid "net_092382" channel 13 start > 54Mb short preamble short slot time > urtwn0: missed beacon threshold set to 30 beacons, beacon interval is 100 TU > urtwn0: received msg 1/4 of the 4-way handshake from 04:f0:21:34:e4:23 > urtwn0: sending msg 2/4 of the 4-way handshake to 04:f0:21:34:e4:23 > urtwn0: received msg 3/4 of the 4-way handshake from 04:f0:21:34:e4:23 > urtwn0: sending msg 4/4 of the 4-way handshake to 04:f0:21:34:e4:23 > > usbdevs: > Controller /dev/usb0: > addr 01: 0000:0000 Generic, EHCI root hub > high speed, self powered, config 1, rev 1.00 > driver: uhub0 > Controller /dev/usb1: > addr 01: 0000:0000 Generic, EHCI root hub > high speed, self powered, config 1, rev 1.00 > driver: uhub1 > addr 02: 05e3:0608 Genesys Logic, USB2.0 Hub > high speed, self powered, config 1, rev 88.32 > driver: uhub4 > addr 03: 258a:000c HAILUCK CO.,LTD, USB KEYBOARD > low speed, power 100 mA, config 1, rev 1.00 > driver: uhidev0 > driver: uhidev1 > addr 04: 7392:7811 Realtek, 802.11n WLAN Adapter > high speed, power 500 mA, config 1, rev 2.00, iSerial 00e04c000001 > driver: urtwn0 > addr 05: 1908:2311 Generic, USB2.0 PC CAMERA > high speed, power 256 mA, config 1, rev 1.00 > driver: uvideo0 > Controller /dev/usb2: > addr 01: 0000:0000 Generic, OHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub2 > Controller /dev/usb3: > addr 01: 0000:0000 Generic, OHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub3 > > pcidump: > > acpidump: > > Xorg.log: > [ 73.344] (--) Using wscons driver on /dev/ttyC1 > [ 73.434] > X.Org X Server 1.20.7 > X Protocol Version 11, Revision 0 > [ 73.435] Build Operating System: OpenBSD 6.6 arm64 > [ 73.435] Current Operating System: OpenBSD pinebook-0011.home.local 6.6 > GENERIC.MP#522 arm64 > [ 73.436] Build Date: 25 March 2020 03:19:41PM > [ 73.436] > [ 73.436] Current version of pixman: 0.38.4 > [ 73.436] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 73.436] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 73.437] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 26 19:35:39 > 2020 > [ 73.447] (==) Using config directory: "/etc/X11/xorg.conf.d" > [ 73.448] (==) Using system config directory > "/usr/X11R6/share/X11/xorg.conf.d" > [ 73.461] (==) No Layout section. Using the first Screen section. > [ 73.461] (==) No screen section available. Using defaults. > [ 73.461] (**) |-->Screen "Default Screen Section" (0) > [ 73.461] (**) | |-->Monitor "<default monitor>" > [ 73.468] (==) No monitor specified for screen "Default Screen Section". > Using a default monitor configuration. > [ 73.469] (==) Automatically adding devices > [ 73.469] (==) Automatically enabling devices > [ 73.469] (==) Not automatically adding GPU devices > [ 73.470] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 73.477] (**) FontPath set to: > /usr/local/share/fonts/spleen, > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 73.477] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 73.477] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 73.478] (II) Loader magic: 0x156840000 > [ 73.478] (II) Module ABI versions: > [ 73.478] X.Org ANSI C Emulation: 0.4 > [ 73.478] X.Org Video Driver: 24.1 > [ 73.478] X.Org XInput driver : 24.1 > [ 73.478] X.Org Server Extension : 10.0 > [ 73.484] (II) LoadModule: "glx" > [ 73.488] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 73.864] (II) Module glx: vendor="X.Org Foundation" > [ 73.864] compiled for 1.20.7, module version = 1.0.0 > [ 73.864] ABI class: X.Org Server Extension, version 10.0 > [ 73.867] (==) Matched wsfb as autoconfigured driver 0 > [ 73.867] (==) Assigned the driver to the xf86ConfigLayout > [ 73.867] (II) LoadModule: "wsfb" > [ 73.869] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so > [ 73.879] (II) Module wsfb: vendor="X.Org Foundation" > [ 73.879] compiled for 1.20.7, module version = 0.4.1 > [ 73.879] ABI class: X.Org Video Driver, version 24.1 > [ 74.396] (II) wsfb: driver for wsdisplay framebuffer: wsfb > [ 74.397] (WW) Falling back to old probe method for wsfb > [ 74.400] (II) wsfb(0): using default device > [ 74.413] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card > support > [ 74.418] (II) wsfb(0): Creating default Display subsection in Screen > section > "Default Screen Section" for depth/fbbpp 24/32 > [ 74.419] (==) wsfb(0): Depth 24, (--) framebuffer bpp 32 > [ 74.419] (==) wsfb(0): RGB weight 888 > [ 74.419] (==) wsfb(0): Default visual is TrueColor > [ 74.420] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0) > [ 74.420] (II) wsfb(0): Vidmem: 8100k > [ 74.421] (==) wsfb(0): DPI set to (96, 96) > [ 74.421] (**) wsfb(0): Using "Shadow Framebuffer" > [ 74.421] (II) Loading sub module "shadow" > [ 74.421] (II) LoadModule: "shadow" > [ 74.430] (II) Loading /usr/X11R6/lib/modules/libshadow.so > [ 74.447] (II) Module shadow: vendor="X.Org Foundation" > [ 74.447] compiled for 1.20.7, module version = 1.1.0 > [ 74.447] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 74.447] (II) Loading sub module "fb" > [ 74.447] (II) LoadModule: "fb" > [ 74.452] (II) Loading /usr/X11R6/lib/modules/libfb.so > [ 74.477] (II) Module fb: vendor="X.Org Foundation" > [ 74.477] compiled for 1.20.7, module version = 1.0.0 > [ 74.477] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 74.521] (==) wsfb(0): Backing store enabled > [ 74.537] (II) Initializing extension Generic Event Extension > [ 74.541] (II) Initializing extension SHAPE > [ 74.543] (II) Initializing extension MIT-SHM > [ 74.546] (II) Initializing extension XInputExtension > [ 74.554] (II) Initializing extension XTEST > [ 74.556] (II) Initializing extension BIG-REQUESTS > [ 74.558] (II) Initializing extension SYNC > [ 74.563] (II) Initializing extension XKEYBOARD > [ 74.568] (II) Initializing extension XC-MISC > [ 74.571] (II) Initializing extension SECURITY > [ 74.575] (II) Initializing extension XFIXES > [ 74.578] (II) Initializing extension RENDER > [ 74.581] (II) Initializing extension RANDR > [ 74.586] (II) Initializing extension COMPOSITE > [ 74.595] (II) Initializing extension DAMAGE > [ 74.597] (II) Initializing extension MIT-SCREEN-SAVER > [ 74.602] (II) Initializing extension DOUBLE-BUFFER > [ 74.609] (II) Initializing extension RECORD > [ 74.612] (II) Initializing extension DPMS > [ 74.612] (II) Initializing extension Present > [ 74.614] (II) Initializing extension DRI3 > [ 74.616] (II) Initializing extension X-Resource > [ 74.626] (II) Initializing extension XVideo > [ 74.629] (II) Initializing extension XVideo-MotionCompensation > [ 74.629] (II) Initializing extension GLX > [ 74.634] (II) AIGLX: Screen 0 is not DRI2 capable > [ 76.392] (II) IGLX: Loaded and initialized swrast > [ 76.392] (II) GLX: Initialized DRISWRAST GL provider for screen 0 > [ 76.392] (II) Initializing extension XFree86-VidModeExtension > [ 76.396] (II) Initializing extension XFree86-DGA > [ 76.400] (II) Initializing extension XFree86-DRI > [ 76.402] (II) Initializing extension DRI2 > [ 77.547] (II) config/wscons: checking input device /dev/wskbd > [ 77.548] (II) wskbd: using layout us > [ 77.549] (II) LoadModule: "kbd" > [ 77.552] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 77.561] (II) Module kbd: vendor="X.Org Foundation" > [ 77.561] compiled for 1.20.7, module version = 1.9.0 > [ 77.561] Module class: X.Org XInput Driver > [ 77.561] ABI class: X.Org XInput driver, version 24.1 > [ 77.561] (II) Using input driver 'kbd' for '/dev/wskbd' > [ 77.561] (**) /dev/wskbd: always reports core events > [ 77.562] (**) /dev/wskbd: always reports core events > [ 77.562] (**) Option "Protocol" "standard" > [ 77.562] (**) Option "XkbRules" "base" > [ 77.562] (**) Option "XkbModel" "pc105" > [ 77.562] (**) Option "XkbLayout" "us" > [ 77.562] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: > KEYBOARD, id 6) > [ 77.564] (EE) KbdOn: tcsetattr: Inappropriate ioctl for device > [ 77.564] (EE) > Fatal server error: > [ 77.564] (EE) can't switch keyboard to raw mode. Enable support for it in > the kernel > or use for example: > > Option "Protocol" "wskbd" > Option "Device" "/dev/wskbd0" > > in your xorg.conf(5) file > [ 77.564] (EE) > [ 77.565] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 77.565] (EE) Please also check the log file at "/var/log/Xorg.0.log" for > additional information. > [ 77.565] (EE) > [ 77.599] (EE) Server terminated with error (1). Closing log file. > > -- > Regards, > Mikolaj >
