On Mon, Apr 20, 2020 at 11:39:20AM +0200, Alexander Shendi wrote: > >Synopsis: Need modified dtb and u-boot files (from NetBSD) to boot > >Category: system, arm, arm64, aarch64 > >Environment: > System : OpenBSD 6.7 > Details : OpenBSD 6.7-beta (GENERIC.MP) #557: Sun Apr 12 20:59:24 > MDT 2020 > > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > > Architecture: OpenBSD.arm64 > Machine : arm64 > >Description: > 1. The machine (Pinebook 11" 1080p) does not from SD-card. No output > either on the screen of on the serial console, > not even from U-Boot. > 2. The left USB port doesn't work. It does under NetBSD. I have > yet failed to come up with a solution. > 3. I can provide the necessary files (*.dtb, u-boot*.bin) > upon request > > > >How-To-Repeat: > Turn off the machine, hit the power switch :) > >Fix: > The machine does not boot, unless the following changes
Allwinner U-Boot images have a builtin dtb. For the pinebook a prebuilt U-Boot image is available in the u-boot-aarch64 package. We aren't going to build miniroots for every poorly designed arm device which lacks firmware required to boot on a dedicated storage device. > are made to the SD-Card: > 1. dd if=miniroot67.fs of=/dev/rsd0c bs=1m conv=sync > 2. dd if=u-boot-sunxi-with-spl.bin of=/dev/rsd0c bs=1024 seek=8 > conv=sync > 3. mount /dev/sd0i /mnt > 4. mkdir /mnt/vendor > 5. cp sun50i-a64-pinebook.dtb /mnt/vendor > 6. umount /mnt > 7. reboot > 8. At the OpenBSD bootloader prompt interrupt the boot > process and enter: > - set tty fb0 > - boot > 9. I can provide the necessary files (*.dtb, u-boot*.bin) > upon request > > > > dmesg: > OpenBSD 6.7-beta (GENERIC.MP) #557: Sun Apr 12 20:59:24 MDT 2020 > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > real mem = 2015813632 (1922MB) > avail mem = 1923813376 (1834MB) > mainbus0 at root: Pinebook > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 512KB 64b/line 16-way L2 cache > efi0 at mainbus0: UEFI 2.7 > efi0: Das U-Boot rev 0x20181100 > apm0 at mainbus0 > psci0 at mainbus0: PSCI 1.1, SMCCC 1.1 > "osc24M_clk" at mainbus0 not configured > "osc32k_clk" at mainbus0 not configured > "internal-osc-clk" at mainbus0 not configured > "sound_spdif" at mainbus0 not configured > "spdif-out" at mainbus0 not configured > agtimer0 at mainbus0: tick rate 24000 KHz > simplebus0 at mainbus0: "soc" > sxisyscon0 at simplebus0 > sxisid0 at simplebus0 > sxiccmu0 at simplebus0 > sxipio0 at simplebus0: 103 pins > ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller" > sxirtc0 at simplebus0 > sxiccmu1 at simplebus0 > sxipio1 at simplebus0: 13 pins > sxirsb0 at simplebus0 > axppmic0 at sxirsb0 addr 0x3a3: AXP803 > "de2" at simplebus0 not configured > "dma-controller" at simplebus0 not configured > "lcd-controller" at simplebus0 not configured > "lcd-controller" at simplebus0 not configured > sximmc0 at simplebus0 > sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma > sximmc1 at simplebus0 > sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma > sximmc2 at simplebus0 > sdmmc2 at sximmc2: 8-bit, sd high-speed, mmc high-speed, dma > "phy" at simplebus0 not configured > ehci0 at simplebus0 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at simplebus0: version 1.0 > ehci1 at simplebus0 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci1 at simplebus0: version 1.0 > com0 at simplebus0sxiccmu_ccu_reset: 0x0000002e > : ns16550, no working fifo > sxipwm0 at simplebus0 > "hdmi-phy" at simplebus0 not configured > "interrupt-controller" at simplebus0 not configured > sxitwi0 at simplebus0 > iic0 at sxitwi0 > "analogix,anx6345" at iic0 addr 0x38 not configured > sxidog0 at simplebus0 > gpio0 at sxipio0: 32 pins > gpio1 at sxipio0: 32 pins > gpio2 at sxipio0: 32 pins > gpio3 at sxipio0: 32 pins > gpio4 at sxipio0: 32 pins > gpio5 at sxipio0: 32 pins > gpio6 at sxipio0: 32 pins > gpio7 at sxipio0: 32 pins > gpio8 at sxipio1: 32 pins > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > "regulator" at mainbus0 not configured > pwmbl0 at mainbus0 > "gpio_keys" at mainbus0 not configured > "vcc3v3" at mainbus0 not configured > "wifi_pwrseq" at mainbus0 not configured > simplefb0 at mainbus0: 1920x1080, 32bpp > wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4 > cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu1: 512KB 64b/line 16-way L2 cache > cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4 > cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu2: 512KB 64b/line 16-way L2 cache > cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4 > cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu3: 512KB 64b/line 16-way L2 cache > manufacturer 0x024c, product 0xb703 at sdmmc1 function 1 not configured > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SN64G, 0080> removable > sd0: 60906MB, 512 bytes/sector, 124735488 sectors > scsibus1 at sdmmc2: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <Samsung, AJTD4R, 0000> removable > sd1: 14910MB, 512 bytes/sector, 30535680 sectors > uhub4 at uhub1 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/88.32 addr 2 > uhidev0 at uhub4 port 1 configuration 1 interface 0 "HAILUCK CO.,LTD USB > KEYBOARD" rev 1.10/1.00 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub4 port 1 configuration 1 interface 1 "HAILUCK CO.,LTD USB > KEYBOARD" rev 1.10/1.00 addr 3 > uhidev1: iclass 3/0, 9 report ids > ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5 > uhid3 at uhidev1 reportid 6: input=0, output=0, feature=255 > uhid4 at uhidev1 reportid 9: input=1, output=0, feature=0 > uvideo0 at uhub4 port 3 configuration 1 interface 0 "Generic USB2.0 PC > CAMERA" rev 2.00/1.00 addr 4 > video0 at uvideo0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > bootfile: sd0a:/bsd > boot device: sd0 > root on sd0a (aebd3abcef6b3a90.a) swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > > usbdevs: > Controller /dev/usb0: > addr 01: 0000:0000 Generic, EHCI root hub > high speed, self powered, config 1, rev 1.00 > driver: uhub0 > Controller /dev/usb1: > addr 01: 0000:0000 Generic, EHCI root hub > high speed, self powered, config 1, rev 1.00 > driver: uhub1 > addr 02: 05e3:0608 Genesys Logic, USB2.0 Hub > high speed, self powered, config 1, rev 88.32 > driver: uhub4 > addr 03: 258a:000c HAILUCK CO.,LTD, USB KEYBOARD > low speed, power 100 mA, config 1, rev 1.00 > driver: uhidev0 > driver: uhidev1 > addr 04: 1908:2311 Generic, USB2.0 PC CAMERA > high speed, power 256 mA, config 1, rev 1.00 > driver: uvideo0 > addr 05: 17ef:7205 Lenovo, Thinkpad USB LAN > high speed, power 180 mA, config 2, rev 30.00, iSerial 000001000000 > driver: cdce0 > Controller /dev/usb2: > addr 01: 0000:0000 Generic, OHCI root hub > full speed, self powered, config 1, rev 1.00 > driver: uhub2 > Controller /dev/usb3: > addr 01: 0000:0000 Generic, OHCI root hu > full speed, self powered, config 1, rev 1.00 > driver: uhub3 > > pcidump: > > acpidump: > >
