I have some hangs with my main workstation running -current if I'm
running X. I've seen it a couple of times in a day - unsure of anything
in particular that triggers it (I thought maybe browser-related but
I've seen it while not actively using a browser too). When it happens
I can't access DDB via BREAK, and there's nothing on the console
from an MP_LOCKDEBUG kernel. Nothing stands out with WITNESS either
(vmmaplk/inode lock order reversal during boot after attaching root,
but I don't think that's unusual).
I haven't triggered it if X is not running. I've now installed 6.7-release
files over the top and haven't triggered it yet with that either (12h
uptime on that now - I was lucky if it got to 3 or 4 hours before).
(The last couple of times I did trigger it, fsck had to work quite hard
afterwards).
Any ideas where to poke or of any suspicious commits? I had a look
through the post-6.7 history but nothing stood out. The window of when
it started in snapshots seems to be between release and something like
GENERIC.MP #201: Tue May 19 18:18:29 MDT.
OpenBSD 6.7 (GENERIC.MP) #182: Thu May 7 11:11:58 MDT 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34247069696 (32660MB)
avail mem = 33196531712 (31658MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec400 (92 entries)
bios0: vendor Dell Inc. version "A12" date 05/11/2017
bios0: Dell Inc. PowerEdge T20
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG SSDT
ASF! DMAR
acpi0: wakeup devices UAR1(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4)
RP05(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3)
XHC_(S4) HDEF(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.66 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.16 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.16 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.16 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 5 (RP05)
acpiprt4 at acpi0: bus 1 (PEG0)
acpiprt5 at acpi0: bus -1 (PEG1)
acpiprt6 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3201, 3200, 3000, 2900, 2700, 2500,
2300, 2200, 2000, 1800, 1700, 1500, 1300, 1100, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82572EI" rev 0x06: apic 8 int 16, address
00:15:17:8e:79:85
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, HASWELL, gen 7
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 16 com
com4 at puc0 port 0 apic 8 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em1 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address
f8:b1:56:ac:32:76
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0280
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "TI XIO2001 PCIE-PCI" rev 0x00
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd4: msi
pci5 at ppb4 bus 5
nvme0 at pci5 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00: msix, NVMe
1.2
nvme0: SAMSUNG MZVLW256HEHP-000L7, firmware 4L7QCXB7, serial S35ENX0J765205
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, SAMSUNG MZVLW256, 4L7Q>
sd0: 244198MB, 512 bytes/sector, 500118192 sectors
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel C226 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus2 at ahci0: 32 targets
sd1 at scsibus2 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0> naa.5002538e9984204d
sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: stts2002
sdtemp1 at iic0 addr 0x19: stts2002
sdtemp2 at iic0 addr 0x1a: stts2002
sdtemp3 at iic0 addr 0x1b: stts2002
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem2 at iic0 addr 0x52: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem3 at iic0 addr 0x53: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2 rev 0x00
vmm0 at mainbus0: VMX/EPT
uhub3 at uhub0 port 3 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/77.64 addr 2
uhub4 at uhub3 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/77.64 addr 3
uhub5 at uhub0 port 4 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 4
uhub6 at uhub5 port 4 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 5
uhub7 at uhub0 port 5 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev
2.00/92.24 addr 6
uhub7: device problem, disabling port 1
uaudio0 at uhub7 port 2 configuration 1 interface 1 "GN Netcom GN 9350" rev
2.00/1.00 addr 7
uaudio0: class v1, full-speed, sync, channels: 1 play, 1 rec, 4 ctls
audio1 at uaudio0
uhidev0 at uhub7 port 2 configuration 1 interface 3 "GN Netcom GN 9350" rev
2.00/1.00 addr 7
uhidev0: iclass 3/0
uhid0 at uhidev0: input=2, output=2, feature=0
uhidev1 at uhub7 port 4 configuration 1 interface 0 "Yubico Yubico Yubikey II"
rev 2.00/2.12 addr 8
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
umass0 at uhub0 port 6 configuration 1 interface 0 "Realtek USB3.0 Card Reader"
rev 2.10/1.32 addr 9
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic-, USB3.0 CRW-CF/MD, 1.00> removable
sd3 at scsibus3 targ 1 lun 1: <Generic-, USB3.0 CRW-SM/xD, 1.00> removable
sd4 at scsibus3 targ 1 lun 2: <Generic-, USB3.0 CRW-SD, 1.00> removable
sd5 at scsibus3 targ 1 lun 3: <Generic-, USB3.0 CRW-MS, 1.00> removable
sd6 at scsibus3 targ 1 lun 4: <Generic-, USB3.0 CRW-SD/MS, 1.00> removable
umodem0 at uhub0 port 8 configuration 1 interface 0 "SoftIron, Inc. OverDrive
1000" rev 2.00/1.02 addr 10
umodem0: data interface 1, has no CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
ugen0 at uhub0 port 8 configuration 1 "SoftIron, Inc. OverDrive 1000" rev
2.00/1.02 addr 10
uhidev2 at uhub0 port 10 configuration 1 interface 0 "Lite-On Technology Corp.
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 11
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev3 at uhub0 port 10 configuration 1 interface 1 "Lite-On Technology Corp.
ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 11
uhidev3: iclass 3/0, 4 report ids
ums0 at uhidev3 reportid 1: 3 buttons
wsmouse0 at ums0 mux 0
uhid1 at uhidev3 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev3 reportid 3: input=3, output=1, feature=0
uhid3 at uhidev3 reportid 4: input=0, output=0, feature=4
uhub8 at uhub0 port 21 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 12
uhub9 at uhub8 port 4 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 13
uhub10 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.04 addr 2
uhub11 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.04 addr 2
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd1a (2b4432fd9000a5b7.a) swap on sd1b dump on sd1b
inteldrm0: 1920x1200, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
arp_rtrequest: bad gateway value: vlan5
uhidev1 at uhub7 port 4 configuration 1 interface 0 "Yubico Yubico Yubikey II"
rev 2.00/2.12 addr 8
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0: console keyboard, using wsdisplay0
