Hello!
I have a pair of servers with CARP
Two nics LACP trunk, several vlan, several CARP
Slow backup on which i switched from trunk to aggr on 6.6 release
and updated a week ago to 6.7 works perfectly with
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
(0x2c80), msi, address fe:e1:ba:01:23:45
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
Now i would like to switch the main server to aggr to.
Unfortunately, the same configuration does not work on another network
card.
bge0 at pci3 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0
(0xa200): msi, address d0:67:e5:ff:00:ff
brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb4: msi
starting network
ifconfig: SIOCSIFMTU: Invalid argument
ifconfig: SIOCSIFMTU: Invalid argument
ifconfig: SIOCAIFADDR: No buffer space available
ifconfig: SIOCAIFADDR: No buffer space available
ifconfig: SIOCAIFADDR: No buffer space available
ifconfig: SIOCAIFADDR: No buffer space available
ifconfig: SIOCSVH: No buffer space available
ifconfig: SIOCSVH: No buffer space available
dell# cat hostname.bge0
-inet6
up
dell# cat hostname.bge1
-inet6
up
dell# cat hostname.aggr0
trunkport bge0
trunkport bge1
up
dell# cat hostname.vlan10
inet 192.168.10.3 255.255.255.0 NONE parent aggr0 vnetid 10
-inet6
up
dell# cat hostname.carp10
inet 192.168.10.10 255.255.255.0 192.168.10.255 vhid 10 advbase 20 advskew
0 carpdev vlan10 pass xrandomx457rg4545645
-inet6
up
.
another vlans and carps
cat /etc/sysctl.conf
kern.bufcachepercent=50
OpenBSD 6.7 (GENERIC.MP) #2: Thu Jun 4 09:55:08 MDT 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4267962368 (4070MB)
avail mem = 4126007296 (3934MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe66e0 (59 entries)
bios0: vendor Dell Inc. version "1.2.4" date 09/19/2011
bios0: Dell Inc. PowerEdge T110 II
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPMI ASF! HPET APIC MCFG BOOT SSDT ASPT SSDT SSDT
DMAR HEST ERST BERT EINJ
acpi0: wakeup devices P0P1(S4) GLAN(S0) EHC1(S4) EHC2(S4) RP01(S5) PXSX(S4)
RP02(S5) PXSX(S4) RP03(S5) PXSX(S4) RP04(S5
) PXSX(S4) RP05(S5) PXSX(S4) RP06(S5) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.43 MHz, 06-2a-07
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,T
M,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AE
S,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.05 MHz, 06-2a-07
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,T
M,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AE
S,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
[97/141]
cpu2: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.05 MHz, 06-2a-07
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,T
M,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AE
S,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.05 MHz, 06-2a-07
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,T
M,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AE
S,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus 3 (RP05)
acpiprt7 at acpi0: bus 4 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres0 at acpi0: FN00, resource for FAN0
[62/141]
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 100 degC
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
"IPI0001" at acpi0 not configured
acpicmos0 at acpi0
"PNP0A05" at acpi0 not configured
"PNP0A05" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
ipmi at mainbus0 not configured
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3100 MHz: speeds: 3101, 3100, 2600, 2400, 2200,
2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
mpii0 at pci1 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
mpii0: PERC H200A, firmware 7.15.8.0 IR, MPI 2.0
scsibus1 at mpii0: 42 targets
sd0 at scsibus1 targ 1 lun 0: <Dell, Virtual Disk, 1028>
naa.600508e00000000001f1485ebd56d30e
sd0: 476416MB, 512 bytes/sector, 975699968 sectors
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int
16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0
(0xa200): msi, address d0:67:e5:ff:00:ff
brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 4
bge1 at pci4 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0
(0xa200): msi, address 00:10:18:00:ff:00
brgphy1 at bge1 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int
23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci5 at ppb4 bus 5
5:3:0: rom address conflict 0xffff0000/0x10000
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI
1.3
ahci0: port 4: 1.5Gb/s
scsibus2 at ahci0: 32 targets
cd0 at scsibus2 targ 4 lun 0: <HL-DT-ST, DVD+-RW GH70N, A101> removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0
int 19
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: mcp98243
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
umass0 at uhub3 port 3 configuration 1 interface 0 "JMicron USB to
ATA/ATAPI Bridge" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <ST350041, 8AS, >
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus3 targ 1 lun 1: <ST500DM0, 02-1BD142, >
sd2: 476940MB, 512 bytes/sector, 976773168 sectors
sd3 at scsibus3 targ 1 lun 2: <ST350041, 0AS, >
sd3: 476940MB, 512 bytes/sector, 976773168 sectors
sd4 at scsibus3 targ 1 lun 3: <STM35004, 18AS, >
sd4: 476940MB, 512 bytes/sector, 976773168 sectors
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Eleen USB Keyboard"
rev 1.10/1.01 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub3 port 4 configuration 1 interface 1 "Eleen USB Keyboard"
rev 1.10/1.01 addr 4
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (f1067f49c3af3f8b.a) swap on sd0b dump on sd0b
carp10: state transition: BACKUP -> MASTER
carp20: state transition: BACKUP -> MASTER
.
