Hello,
I just noticed this today after upgrading to the latest amd64 snapshot,
but honestly it may have begun some time ago. I log in almost reflexively
and seldom pay much attention to the xenodm display.
When X starts, I see a *very* brief flicker of xconsole at the
bottom-right of the screen before it disappears. I can then log in
normally at the regular xenodm prompt.
I see this in the xenodm.log file:
=====
xenodm info (pid 4097): Starting
xenodm info (pid 4097): Starting X server on :0
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 6.7 amd64
Current Operating System: OpenBSD xeon.irascible.net 6.7 GENERIC.MP#319 amd64
Build Date: 01 July 2020 02:44:22PM
Current version of pixman: 0.38.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 1 18:05:21 2020
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
(II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
xenodm info (pid 60500): sourcing /etc/X11/xenodm/Xsetup_0
X connection to :0 broken (explicit kill or server shutdown).
xenodm info (pid 60500): sourcing /etc/X11/xenodm/GiveConsole
xenodm info (pid 97106): executing session /etc/X11/xenodm/Xsession
=====
Note the "X connection to :0 broken (explicit kill or server shutdown)."
right after Xsetup_O is sourced. Any thoughts on running down the root of
the problem?
Full dmesg:
OpenBSD 6.7-current (GENERIC.MP) #319: Wed Jul 1 14:09:58 MDT 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8454500352 (8062MB)
avail mem = 8183242752 (7804MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec350 (88 entries)
bios0: vendor Dell Inc. version "A28" date 06/28/2018
bios0: Dell Inc. Precision T1650
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT DMAR ASF! SLIC
acpi0: wakeup devices UAR1(S3) P0P1(S4) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4)
RP03(S4) PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz, 3193.32 MHz, 06-3a-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC skew=0 observed drift=0
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz, 3192.76 MHz, 06-3a-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: TSC skew=-10 observed drift=0
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz, 3192.76 MHz, 06-3a-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: TSC skew=-10 observed drift=0
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz, 3192.76 MHz, 06-3a-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: TSC skew=26 observed drift=0
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
0x3f - 0xff
extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
0xcf8 - 0xcff
0x10000 - 0xffffffff
extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
0x0 - 0x9ffff
0xc0000 - 0xcffff
0xe8000 - 0xdf9fffff
0xfeb00000 - 0xffffffffffffffff
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"*pnp0c14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
acpivout3 at acpivideo0: DD04
acpivout4 at acpivideo0: DD05
acpivout5 at acpivideo0: DD06
acpivout6 at acpivideo0: DD07
acpivout7 at acpivideo0: DD08
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3193 MHz: speeds: 3201, 3200, 3100, 3000, 2900,
2700, 2600, 2500, 2400, 2300, 2200, 2100, 1900, 1800, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v2 Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, IVYBRIDGE, gen 7
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
90:b1:1c:a2:b4:c0
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci1 at ppb0 bus 1
pcib0 at pci0 dev 31 function 0 "Intel C216 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0>
naa.500253855020d8a0
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, ST500DM002-1BD14, KC45>
naa.5000c500603cf1fa
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 2 lun 0: <TSSTcorp, DVD-ROM SH-116AB, D100> removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2
int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: mcp98243
sdtemp1 at iic0 addr 0x1b: mcp98243
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 4 configuration 1 interface 0 "American Power
Conversion Back-UPS NS 900M FW:932.a10.D USB FW:a10" rev 2.00/0.90 addr 2
uhidev0: iclass 3/0, 128 report ids
upd0 at uhidev0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhidev1 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Laser
Mouse" rev 2.00/56.01 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub3 port 2 configuration 1 interface 0 "Unicomp Endura Pro
Keyboard" rev 1.10/43.34 addr 4
uhidev2: iclass 3/1
ukbd0 at uhidev2: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev3 at uhub3 port 2 configuration 1 interface 1 "Unicomp Endura Pro
Keyboard" rev 1.10/43.34 addr 4
uhidev3: iclass 3/1, 3 report ids
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhid0 at uhidev3 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev3 reportid 3: input=1, output=0, feature=0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6dae9fb8b0d28ded.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
--
Joe Gidi
[email protected]
"You cannot buy skill." -- Ross Seyfried
