On Tue, Aug 18, 2020 at 12:09:56PM -0400, Jon Fineman wrote: > On Wed, 19 Aug 2020 00:06:59 +1000 > Jonathan Gray <[email protected]> wrote: > > > On Sun, Aug 16, 2020 at 02:27:46AM +0000, Jon Fineman wrote: > > > I was not able to do a proper sendbug report because the PC hangs. > > > > > > I have an Acer Aspire A315 laptop. 6.6 works fine. When I upgrade > > > to 6.7 Release or Snapshot I get the below firmware load error. > > > Below that output is the dmesg from a 6.6 boot so you can see the > > > hardware. > > > > The first boot after a new install will not have the firmware. > > fw_update(1) will run and install it into /etc/firmware/amdgpu/ > > > > Does amdgpu still not attach after you've verified the files are > > present and rebooted? > > > I mounted the memory stick and verified the amd firmware files are > present in /etc/firmware/amdgpu. I also downloaded the ones from 6.7 > and copied them to that directory. > > When I booted it wanted to update the firmware for amdgpu and vmm. > > Then it dies while re-ording the kernel. > > I am not sure how I would tell if the amdgpu attached or not. > > /var/log/message from this test: > > Aug 18 11:54:56 laptop /bsd: softraid0 at root > Aug 18 11:54:56 laptop /bsd: scsibus4 at softraid0: 256 targets > Aug 18 11:54:56 laptop /bsd: root on sd1a (c5239493226aa09b.a) swap on > sd1b dump on sd1b Aug 18 11:54:56 laptop /bsd: initializing kernel > modesetting (STONEY 0x1002:0x98E4 0x1025:0x1192 0xDA). Aug 18 11:54:56 > laptop /bsd: amdgpu_irq_add_domain: stub Aug 18 11:54:56 laptop /bsd: > amdgpu0: 1366x768, 32bpp Aug 18 11:54:56 laptop /bsd: wsdisplay0 at > amdgpu0 mux 1: console (std, vt100 emulation), using wskbd0 Aug 18 > 11:54:56 laptop /bsd: wsdisplay0: screen 1-5 added (std, vt100 > emulation)
It has attached here. If there is fatal error such as missing firmware it will detach and efifb or vga will reclaim the console.
