> Date: Tue, 29 Sep 2020 19:18:05 +0200 > From: Klemens Nanni <[email protected]> > > Just installed the latest snapshot on a Lemote 8089D: > > Prep miniroot on USB stick: > > $ what miniroot68.img > /home/kn/miniroot68.img: > OpenBSD 6.8 (RAMDISK) #52: Mon Sep 28 18:29:30 MDT 2020 > PD KSH v5.2.14 99/07/13.2 > # dd if=./miniroot68.img of=/dev/rsd2c bs=1m > 9+0 records in > 9+0 records out > 9437184 bytes transferred in 4.526 secs (2084909 bytes/sec) > > Plug in, power on Lemote, drop to PMON and boot bsd.rd off USB: > > PMON> boot -k /dev/fs/ext2@usb0/bsd.rd > > Installer boots, I default to everything, i.e. auto layout on wd0, all > sets (fetched over HTTPS), enable X, hint final <enter> to reboot. > > Machine comes back up and the very top left corner of the screen shows > this in white on black: > > file is not set or not exist! > path is not complete, haven't selected the device or file! > The boot.cfg not existed!System will try default entry from al. > > (Like this with missing line break and "al." not "all."). > > > Very bottom left corner shows the kernel in white on blue: > > Trap cause = 2 frame 0xffffffffaff7fb18 > Trap PC 0xffffffff80100248 RA 0xffffffff8006b3e0 fault > 00xfffffffffffa4f8 > panic: trap > System Halt. > > > I have never booted this machine before, it is the first time I am > installing a loongson machine.
Try an older release?
