> Synopsis: OpenBSD 6.8 stops booting after 'pckbd_enable: command error'
> Category:
> Environment:
System : OpenBSD 6.8
Details : OpenBSD 6.8 (GENERIC.MP) #98: Sun Oct 4 18:13:26 MDT 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
> Description:
During the 2nd reboot after a fresh installation, the boot
process stopped in that moment when the display changes its
resolution. After powering off and back on, the machines
appears to boot normally, but with the next reboot, the same
problem occurred again. Removing the monitor and booting
through the serial console lets the machine boot up, showing
'pckbd_enable: command error' in dmesg at that moment when
the machine stopped booting before.
> How-To-Repeat:
Reboot with monitor attached.
> Fix:
Boot through serial console. Error still happens, though.
dmesg:
>> OpenBSD/amd64 BOOT 3.52
boot>
booting sr0a:/bsd: 14415144+3195920+340000+0+876544
[1002454+128+1138200+861220]=0x14d4298
entry point at 0xffffffff81001000
[ using 3003032 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.8 (GENERIC.MP) #98: Sun Oct 4 18:13:26 MDT 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4108800000 (3918MB)
avail mem = 3969228800 (3785MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecef0 (51 entries)
bios0: vendor American Megatrends Inc. version "D7530A09" date 06/18/2019
bios0: MiTAC PD14RI
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
acpi0: wakeup devices PS2K(S0) PS2M(S0) BRCM(S0) XHC1(S4) HDEF(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1600.32 MHz, 06-4c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1599.96 MHz, 06-4c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1599.96 MHz, 06-4c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, 1599.96 MHz, 06-4c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiec0 at acpi0: not present
acpicmos0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"BCM43241" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(10@500 mwait.1@0x58), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: CLK0, resource for CAMD
acpipwrres2 at acpi0: USBC, resource for XHC1
acpipwrres3 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 95 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280,
1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x21
drm0 at inteldrm0
inteldrm0: msi, CHERRYVIEW, gen 8
ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, C300-MTFDBAK128M, 0006> naa.500a075103075630
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, C300-CTFDDAC128M, 0006> naa.500a07510303a338
sd1: 122104MB, 512 bytes/sector, 250069680 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Braswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x21: msi
azalia0: codecs: Realtek ALC662, Intel/0x2883, using Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address xx:xx:xx:xx:xx:xx
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x21: msi
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "ASMedia ASM1182e" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 3 function 0 "ASMedia ASM1182e" rev 0x00: msi
pci4 at ppb3 bus 4
re1 at pci4 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address xx:xx:xx:xx:xx:xx
rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0
ppb4 at pci3 dev 7 function 0 "ASMedia ASM1182e" rev 0x00: msi
pci5 at ppb4 bus 5
re2 at pci5 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00),
msi, address xx:xx:xx:xx:xx:xx
rgephy2 at re2 phy 7: RTL8251 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x21
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x21: apic 1 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay at vga0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6792D rev 0x13
lm1 at wbsio0 port 0xa10/8: NCT6792D
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
uhub1 at uhub0 port 5 configuration 1 interface 0 "Alcor Micro product 0x6254"
rev 2.00/1.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd2: 122103MB, 512 bytes/sector, 250067198 sectors
root on sd2a (b4e3237699671deb.a) swap on sd2b dump on sd2b
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1
pckbd_enable: command error
wsdisplay0: screen 0-5 added (std, vt100 emulation)
Automatic boot in progress: starting file system checks.
/dev/sd2a (b4e3237699671deb.a): file system is clean; not checking
/dev/sd2n (b4e3237699671deb.n): file system is clean; not checking
/dev/sd2d (b4e3237699671deb.d): file system is clean; not checking
/dev/sd2h (b4e3237699671deb.h): file system is clean; not checking
/dev/sd2i (b4e3237699671deb.i): file system is clean; not checking
/dev/sd2j (b4e3237699671deb.j): file system is clean; not checking
/dev/sd2l (b4e3237699671deb.l): file system is clean; not checking
/dev/sd2k (b4e3237699671deb.k): file system is clean; not checking
/dev/sd2m (b4e3237699671deb.m): file system is clean; not checking
/dev/sd2e (b4e3237699671deb.e): file system is clean; not checking
/dev/sd2f (b4e3237699671deb.f): file system is clean; not checking
/dev/sd2g (b4e3237699671deb.g): file system is clean; not checking
kbd: keyboard mapping set to de.nodead
pf enabled
net.inet.ip.forwarding: 0 -> 1
starting network
reordering libraries: done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Tue Oct 20 14:40:56 CEST 2020
