> From: AIsha Tammy <[email protected]> > Date: Thu, 24 Dec 2020 19:58:06 -0500
Can you send eeprom -p output for this machine? > Hi, > New installation of latest snapshot on Pine64 LTS model fails with > > Stopped at 0xfeffff8000553ba0:panic: uvm_fault failed: ffffff80009eca34 > esr 96000004 far feffff8000553ba0 > Stopped at panic+0x158: mov w > 0, w20 > TID PID UID PRFLAGS PFLAGS CPU COMMAND > 174985 16052 0 0x14000 0x200 3 update > 429360 61791 0 0x14000 0x200 2 cleaner > 89346 21427 0 0x14000 0x200 1 reaper > * 0 0 0 0x10000 0x200 0K swapper > db_enter() at panic+0x154 > panic() at do_el1h_sync+0x21c > do_el0_sync() at handle_el1h_sync+0x6c > handle_el1h_sync() at db_read_bytes+0x70 > db_read_bytes() at db_get_value+0x40 > db_get_value() at disasm+0x2c > disasm() at db_trap+0x84 > https://www.openbsd.org/ddb.html describes the minimum info required in bug > reports. Insufficient info makes it difficult to find and fix bugs. > > Output of trace > > db_enter() at panic+0x154 > panic() at do_el1h_sync+0x21c > do_el0_sync() at handle_el1h_sync+0x6c > handle_el1h_sync() at db_read_bytes+0x70 > db_read_bytes() at db_get_value+0x40 > db_get_value() at disasm+0x2c > disasm() at db_trap+0x84 > db_trap() at kdb_trap+0xc8 > kdb_trap() at 0xfeefff80009ed238 > feefff80009ed23c at 0xffffff80006b2f4c > do_el1h_sync() at handle_el1h_sync+0x6c > handle_el1h_sync() at 0xfeffff8000553b9c > feffff8000553ba0 at 0xffffff8000553cd0 > rsb_read_1() at axppmic_get_voltage+0x28 > axppmic_get_voltage() at regulator_set_voltage+0x144 > regulator_set_voltage() at cpu_opp_mountroot+0x12c > cpu_opp_mountroot() at config_process_deferred_mountroot+0x5c > config_process_deferred_mountroot() at main+0x5d0 > main() at $x.2+0x70 > > Thanks, > Aisha > > Full boot log: > > U-Boot SPL 2020.10 (Dec 16 2020 - 01:53:48 -0700) > DRAM: 2048 MiB > Trying to boot from MMC1 > NOTICE: BL31: v2.3():2.3 > NOTICE: BL31: Built : 22:59:15, Dec 14 2020 > NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) > NOTICE: BL31: Found U-Boot DTB at 0x4093788, model: Pine64 LTS > INFO: ARM GICv2 driver initialized > INFO: Configuring SPC Controller > INFO: PMIC: Probing AXP803 on RSB > INFO: PMIC: dcdc1 voltage: 3.300V > INFO: PMIC: dcdc5 voltage: 1.200V > INFO: PMIC: dcdc6 voltage: 1.100V > INFO: PMIC: dldo1 voltage: 3.300V > INFO: PMIC: dldo2 voltage: 3.300V > INFO: PMIC: dldo4 voltage: 3.300V > INFO: PMIC: fldo1 voltage: 1.200V > INFO: PMIC: Enabling DC SW > INFO: BL31: Platform setup done > INFO: BL31: Initializing runtime services > INFO: BL31: cortex_a53: CPU workaround for 843419 was applied > INFO: BL31: cortex_a53: CPU workaround for 855873 was applied > NOTICE: PSCI: System suspend is unavailable > INFO: BL31: Preparing for EL3 exit to normal world > INFO: Entry point address = 0x4a000000 > INFO: SPSR = 0x3c9 > alloc space exhausted > > > U-Boot 2020.10 (Dec 16 2020 - 01:53:48 -0700) Allwinner Technology > > CPU: Allwinner A64 (SUN50I) > Model: Pine64 LTS > DRAM: 2 GiB > MMC: mmc@1c0f000: 0, mmc@1c11000: 1 > Loading Environment from FAT... Card did not respond to voltage select! > In: serial > Out: serial > Err: serial > Net: phy interface7 > eth0: ethernet@1c30000 > starting USB... > Bus usb@1c1a000: USB EHCI 1.00 > Bus usb@1c1a400: USB OHCI 1.0 > Bus usb@1c1b000: USB EHCI 1.00 > Bus usb@1c1b400: USB OHCI 1.0 > scanning bus usb@1c1a000 for devices... 1 USB Device(s) found > scanning bus usb@1c1a400 for devices... 1 USB Device(s) found > scanning bus usb@1c1b000 for devices... 1 USB Device(s) found > scanning bus usb@1c1b400 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > 27644 bytes read in 4 ms (6.6 MiB/s) > Found EFI removable media binary efi/boot/bootaa64.efi > Scanning disk [email protected]... > ** Unrecognized filesystem type ** > Card did not respond to voltage select! > Scanning disk [email protected]... > Disk [email protected] not ready > Found 3 disks > No EFI system partition > BootOrder not defined > EFI boot manager: Cannot load any image > 168728 bytes read in 10 ms (16.1 MiB/s) > Booting /efi\boot\bootaa64.efi > disks: sd0* > >> OpenBSD/arm64 BOOTAA64 1.3 > boot> > NOTE: random seed is being reused. > booting sd0a:/bsd: 8669392+1774624+563480+826592 > [631158+109+1059936+621984]=0xf885a0 > EHCI failed to shut down host controller. > type 0x2 pa 0x40000000 va 0x40000000 pages 0x4000 attr 0x8 > type 0x7 pa 0x44000000 va 0x44000000 pages 0x3ef6 attr 0x8 > type 0x9 pa 0x47ef6000 va 0x47ef6000 pages 0x14 attr 0x8 > type 0x7 pa 0x47f0a000 va 0x47f0a000 pages 0x701f1 attr 0x8 > type 0x2 pa 0xb80fb000 va 0xb80fb000 pages 0xcf3 attr 0x8 > type 0x4 pa 0xb8dee000 va 0xb8dee000 pages 0x1 attr 0x8 > type 0x2 pa 0xb8def000 va 0xb8def000 pages 0x3 attr 0x8 > type 0x7 pa 0xb8df2000 va 0xb8df2000 pages 0x1 attr 0x8 > type 0x2 pa 0xb8df3000 va 0xb8df3000 pages 0x100 attr 0x8 > type 0x1 pa 0xb8ef3000 va 0xb8ef3000 pages 0x2a attr 0x8 > type 0x0 pa 0xb8f1d000 va 0xb8f1d000 pages 0x5 attr 0x8 > type 0x4 pa 0xb8f22000 va 0xb8f22000 pages 0x1 attr 0x8 > type 0x6 pa 0xb8f23000 va 0x25e6836000 pages 0x1 attr 0x8000000000000008 > type 0x4 pa 0xb8f24000 va 0xb8f24000 pages 0x2 attr 0x8 > type 0x0 pa 0xb8f26000 va 0xb8f26000 pages 0x1 attr 0x8 > type 0x6 pa 0xb8f27000 va 0x25e683a000 pages 0x3 attr 0x8000000000000008 > type 0x4 pa 0xb8f2a000 va 0xb8f2a000 pages 0x1 attr 0x8 > type 0x6 pa 0xb8f2b000 va 0x25e683e000 pages 0x4 attr 0x8000000000000008 > type 0x0 pa 0xb8f2f000 va 0xb8f2f000 pages 0x1 attr 0x8 > type 0x4 pa 0xb8f30000 va 0xb8f30000 pages 0x1 attr 0x8 > type 0x0 pa 0xb8f31000 va 0xb8f31000 pages 0x1 attr 0x8 > type 0x4 pa 0xb8f32000 va 0xb8f32000 pages 0x2 attr 0x8 > type 0x0 pa 0xb8f34000 va 0xb8f34000 pages 0x1 attr 0x8 > type 0x4 pa 0xb8f35000 va 0xb8f35000 pages 0x1 attr 0x8 > type 0x0 pa 0xb8f36000 va 0xb8f36000 pages 0x2 attr 0x8 > type 0x4 pa 0xb8f38000 va 0xb8f38000 pages 0x1 attr 0x8 > type 0x0 pa 0xb8f39000 va 0xb8f39000 pages 0x1 attr 0x8 > type 0x2 pa 0xb8f3a000 va 0xb8f3a000 pages 0x5026 attr 0x8 > type 0x5 pa 0xbdf60000 va 0x25eb873000 pages 0x10 attr 0x8000000000000008 > type 0x2 pa 0xbdf70000 va 0xbdf70000 pages 0x2090 attr 0x8 > [ using 2314152 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org > > OpenBSD 6.8-current (GENERIC.MP) #950: Thu Dec 24 04:29:48 MST 2020 > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > real mem = 2014212096 (1920MB) > avail mem = 1919926272 (1830MB) > random: boothowto does not indicate good seed > mainbus0 at root: Pine64 LTS > psci0 at mainbus0: PSCI 1.1, SMCCC 1.2 > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 512KB 64b/line 16-way L2 cache > cpu0: CRC32,SHA2,SHA1,AES+PMULL > cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4 > cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu1: 512KB 64b/line 16-way L2 cache > cpu1: CRC32,SHA2,SHA1,AES+PMULL > cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4 > cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu2: 512KB 64b/line 16-way L2 cache > cpu2: CRC32,SHA2,SHA1,AES+PMULL > cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4 > cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu3: 512KB 64b/line 16-way L2 cache > cpu3: CRC32,SHA2,SHA1,AES+PMULL > efi0 at mainbus0: UEFI 2.8 > efi0: Das U-Boot rev 0x20201000 > apm0 at mainbus0 > "display-engine" at mainbus0 not configured > "osc24M_clk" at mainbus0 not configured > "osc32k_clk" at mainbus0 not configured > "pmu" at mainbus0 not configured > simpleaudio0 at mainbus0 > agtimer0 at mainbus0: tick rate 24000 KHz > simplebus0 at mainbus0: "soc" > sxisyscon0 at simplebus0 > sxisid0 at simplebus0 > sxiccmu0 at simplebus0 > sxipio0 at simplebus0: 103 pins > ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller" > sxirtc0 at simplebus0 > sxiccmu1 at simplebus0 > sxipio1 at simplebus0: 13 pins > sxirsb0 at simplebus0 > axppmic0 at sxirsb0 addr 0x3a3: AXP803 > "bus" at simplebus0 not configured > "dma-controller" at simplebus0 not configured > "lcd-controller" at simplebus0 not configured > "lcd-controller" at simplebus0 not configured > "video-codec" at simplebus0 not configured > sximmc0 at simplebus0 > sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma > sximmc1 at simplebus0 > sdmmc1 at sximmc1: 8-bit, sd high-speed, mmc high-speed, dma > "crypto" at simplebus0 not configured > "usb" at simplebus0 not configured > "phy" at simplebus0 not configured > ehci0 at simplebus0 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at simplebus0: version 1.0 > ehci1 at simplebus0 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci1 at simplebus0: version 1.0 > "dai" at simplebus0 not configured > "codec" at simplebus0 not configured > sxitemp0 at simplebus0 > com0 at simplebus0: ns16550, no working fifo > com0: console > "spi" at simplebus0 not configured > dwxe0 at simplebus0: address 02:ba:17:b1:0f:02 > rgephy0 at dwxe0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5 > "gpu" at simplebus0 not configured > "dram-controller" at simplebus0 not configured > "deinterlace" at simplebus0 not configured > "hdmi" at simplebus0 not configured > "hdmi-phy" at simplebus0 not configured > "interrupt-controller" at simplebus0 not configured > "codec-analog" at simplebus0 not configured > sxidog0 at simplebus0 > gpio0 at sxipio0: 32 pins > gpio1 at sxipio0: 32 pins > gpio2 at sxipio0: 32 pins > gpio3 at sxipio0: 32 pins > gpio4 at sxipio0: 32 pins > gpio5 at sxipio0: 32 pins > gpio6 at sxipio0: 32 pins > gpio7 at sxipio0: 32 pins > gpio8 at sxipio1: 32 pins > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > "opp_table0" at mainbus0 not configured > "hdmi-connector" at mainbus0 not configured > "vcc1v8" at mainbus0 not configured > sdmmc1: can't enable card > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, 00000, 0010> removable > sd0: 14991MB, 512 bytes/sector, 30702592 sectors > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (692b2930a8761f1b.a) swap on sd0b dump on sd0b > Stopped at 0xfeffff8000553ba0:panic: uvm_fault failed: ffffff80009eca34 > esr 96000004 far feffff8000553ba0 > Stopped at panic+0x158: mov w > 0, w20 > TID PID UID PRFLAGS PFLAGS CPU COMMAND > 174985 16052 0 0x14000 0x200 3 update > 429360 61791 0 0x14000 0x200 2 cleaner > 89346 21427 0 0x14000 0x200 1 reaper > * 0 0 0 0x10000 0x200 0K swapper > db_enter() at panic+0x154 > panic() at do_el1h_sync+0x21c > do_el0_sync() at handle_el1h_sync+0x6c > handle_el1h_sync() at db_read_bytes+0x70 > db_read_bytes() at db_get_value+0x40 > db_get_value() at disasm+0x2c > disasm() at db_trap+0x84 > https://www.openbsd.org/ddb.html describes the minimum info required in bug > reports. Insufficient info makes it difficult to find and fix bugs. > >
