Reinstall the package (pkg_delete and pkg_add again). Same applies for anyone else with problems for software written in go, package revisions have now been bumped so after the next snapshot is available pkg_add -u will pick it up, but reinstall will fix it now.
On 2021/03/11 15:17, Chris Jones wrote: > Synopsis: dnscrypt_proxy fails to start (core dump) after upgrade to tonight > snapshot > Category: Ports package > Environment: > > System : OpenBSD 6.9 > Details : OpenBSD 6.9-beta (GENERIC.MP) #394: Wed Mar 10 19:59:10 MST 2021 > [email protected] <mailto:[email protected]> > :/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > Architecture: OpenBSD.amd64 > Machine : amd64 > > > Description: > > After upgrading to the snapshot this evening, all daemons came backup as > expected except one — dnscrypt_proxy. When I tried to manually start the > dnscrypt_proxy service ('rcctl start dnscrypt_proxy') I could see the > following message in /var/log/messages: > > Mar 10 21:39:07 minto-fw01 /bsd: [dnscrypt-proxy]62869/394062 pc=46b946 > inside 2318ff000-23190c000: bogus syscall > > How-To-Repeat: > > This will repeat evertime I try to start dnscrypt_proxy. > > Fix: > > No workaround at this point. > > dmesg: > OpenBSD 6.9-beta (GENERIC.MP) #394: Wed Mar 10 19:59:10 MST 2021 > [email protected] <mailto:[email protected]> > :/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8519643136 (8124MB) > avail mem = 8246059008 (7864MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x7cd0b020 (14 entries) > bios0: vendor coreboot version "v4.12.0.3" date 10/28/2020 > bios0: Protectli FW4B > acpi0 at bios0: ACPI 6.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT MCFG APIC > acpi0: wakeup devices XHCI(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 2240.42 MHz, 06-4c-04 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu0: 1MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 79MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 2239.94 MHz, 06-4c-04 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu1: 1MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 2239.95 MHz, 06-4c-04 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu2: 1MB 64b/line 16-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Celeron(R) CPU J3160 @ 1.60GHz, 2239.95 MHz, 06-4c-04 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu3: 1MB 64b/line 16-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 115 pins, remapped > acpiprt0 at acpi0: bus 0 (PCI0) > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > "INT33BD" at acpi0 not configured > acpicmos0 at acpi0 > chvgpio0 at acpi0 GPSW uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins > chvgpio1 at acpi0 GPNC uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins > chvgpio2 at acpi0 GPEC uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins > chvgpio3 at acpi0 GPSE uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins > "BOOT0000" at acpi0 not configured > acpicpu0 at acpi0: C3(1@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(1@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(1@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(1@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), > C1(1000@1 mwait.1), PSS > cpu0: using VERW MDS workaround > cpu0: Enhanced SpeedStep 2240 MHz: speeds: 1601, 1600, 1520, 1440, 1360, > 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35 > drm0 at inteldrm0 > inteldrm0: msi, CHERRYVIEW, gen 8 > ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI > 1.3.1 > ahci0: port 0: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SUV500M, 0030> > naa.50026b77836de374 > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x35: msi > azalia0: codecs: Realtek ALC662, Intel/0x2883, using Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 00:e0:67:22:36:a4 > ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 00:e0:67:22:36:a5 > ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi > pci3 at ppb2 bus 3 > em2 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 00:e0:67:22:36:a6 > ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi > pci4 at ppb3 bus 4 > em3 at pci4 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 00:e0:67:22:36:a7 > pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35 > ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072 > wsdisplay at vga0 not configured > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk Cruzer Fit" rev > 2.00/1.27 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> removable > serial.07815571870804115450 > sd1: 7633MB, 512 bytes/sector, 15633408 sectors > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (993900eb51631b95.a) swap on sd0b dump on sd0b > inteldrm0: 1024x768, 32bpp > wsdisplay0 at inteldrm0 mux 1 > wsdisplay0: screen 0-5 added (std, vt100 emulation) > > usbdevs: > Controller /dev/usb0: > addr 01: 8086:0000 Intel, xHCI root hub > super speed, self powered, config 1, rev 1.00 > driver: uhub0 > addr 02: 0781:5571 SanDisk, Cruzer Fit > high speed, power 200 mA, config 1, rev 1.27, iSerial 4C530102870804115450 > driver: umass0 >
