Ok, manual upgrade fixed the problem.
On Fri, Jun 11, 2021 at 12:36:12PM +0000, Mikolaj Kucharski wrote:
> Hi,
>
> I sysupgraded today one of my machines and it didn't come back up
> properly. It's stuck after executing init(8) with following message
> every couple of seconds:
>
> init: can't open /dev/console: No such file or directory
>
> I was upgrading to (based on the source location, where sysupgrade
> fetched the sets, kernels and ramdisk):
>
> OpenBSD 6.9-current (GENERIC.MP) #68: Thu Jun 10 22:16:52 MDT 2021
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>
> I don't know what went wrong during upgrade, as I just started
> sysupgrade(8) and went away from keyboard for an hour or so and came
> back to above situation.
>
> Have you seen this before? I didn't try to recover the system, not sure
> will I have time this weekend, but wanted to ask others.
>
OpenBSD 6.9-current (GENERIC.MP) #68: Thu Jun 10 22:16:52 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1955332096 (1864MB)
avail mem = 1880657920 (1793MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x7433a000 (49 entries)
bios0: vendor INSYDE Corp. version "22.11" date 07/29/2015
bios0: Insyde Braswell
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI TCPA UEFI MCFG SLIC SSDT SSDT SSDT SSDT SSDT APIC
SSDT TPM2 FPDT BGRT
acpi0: wakeup devices XHC1(S4) BRC1(S0) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4)
PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1600.33 MHz, 06-4c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1599.97 MHz, 06-4c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiec0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
acpibat0 at acpi0: BAT1 model "Harris Beach" serial 123456789 type LION oem "LG"
sdhc0 at acpi0 SDHA addr 0x9141f000/0x1000 irq 45
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
sdhc1 at acpi0 SDHC addr 0x9141d000/0x1000 irq 47
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 4-bit, sd high-speed, mmc high-speed, ddr52, dma
"INTL9C60" at acpi0 not configured
"BCM2E64" at acpi0 not configured
"BCM4752" at acpi0 not configured
"BOSC0200" at acpi0 not configured
"GDIX1001" at acpi0 not configured
"MSFT0002" at acpi0 not configured
"ATML1000" at acpi0 not configured
"NXP7471" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"HTR0001" at acpi0 not configured
acpicmos0 at acpi0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
chvgpio0 at acpi0 GPO0 uid 1 addr 0xfed80000/0x8000 irq 49, 56 pins
chvgpio1 at acpi0 GPO1 uid 2 addr 0xfed88000/0x8000 irq 48, 59 pins
chvgpio2 at acpi0 GPO2 uid 3 addr 0xfed90000/0x8000 irq 50, 24 pins
chvgpio3 at acpi0 GPO3 uid 4 addr 0xfed98000/0x8000 irq 91, 55 pins
"INT3400" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(10@1000 mwait.1@0x64), C2(10@500 mwait.1@0x58), C1(1000@1
mwait.1), PSS
acpipwrres0 at acpi0: CLK0, resource for CAMD
acpipwrres1 at acpi0: CLK0, resource for CAM1
acpipwrres2 at acpi0: CLK1, resource for CAM2, CAM3
acpipwrres3 at acpi0: ID3C, resource for ISP3
acpipwrres4 at acpi0: USBC, resource for XHC1
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 1280,
1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x21
drm0 at inteldrm0
inteldrm0: msi, CHERRYVIEW, gen 8
"Intel Braswell Power" rev 0x21 at pci0 dev 11 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Braswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x21: msi
azalia0: codecs: Realtek ALC269, Intel/0x2883, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), msi,
address 00:16:96:e6:18:dd
rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x21
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x21: apic 1 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
efifb at mainbus0 not configured
dt: 445 probes
sdmmc1: can't enable card
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Samsung, MBG4GC, 0000> removable
sd0: 29820MB, 512 bytes/sector, 61071360 sectors
uvideo0 at uhub0 port 1 configuration 1 interface 0 "Image Processor USB 2.0 PC
Cam" rev 2.00/0.05 addr 2
video0 at uvideo0
urtwn0 at uhub0 port 4 configuration 1 interface 0 "Realtek 802.11n WLAN
Adapter" rev 2.00/2.00 addr 3
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 00:13:ef:40:51:2a
ugen0 at uhub0 port 5 "Realtek 802.11n WLAN Adapter" rev 2.10/2.00 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (d31094b20cc03606.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
--
Regards,
Mikolaj
