Hi,
I'm trying to install sparc64-current into an LDOM using miniroot70.img
but I'm getting at the following at the disk partitioning step:
disklabel: DIOCWDINFO: Invalid argument
I tried miniroot69.img and it works fine.
Here is the console script from the install:
sparc# ldomctl create-vdisk -s 15G /var/vdsk/current.img
sparc# dd if=miniroot70.img of=/var/vdsk/current.img conv=notrunc
6400+0 records in
6400+0 records out
3276800 bytes transferred in 0.200 secs (16307450 bytes/sec)
sparc#
sparc# ldomctl start current
sparc# ldomctl console current
Connected to /dev/ttyV0 (speed 9600)
+312+28 start=0x1000000
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.0 (RAMDISK) #926: Sun Sep 19 17:29:28 MDT 2021
[email protected]:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 4294967296 (4096MB)
avail mem = 4205690880 (4010MB)
random: boothowto does not indicate good seed
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1415.103 MHz
"SUNW,UltraSPARC-T2" at mainbus0 not configured
"SUNW,UltraSPARC-T2" at mainbus0 not configured
"SUNW,UltraSPARC-T2" at mainbus0 not configured
"SUNW,UltraSPARC-T2" at mainbus0 not configured
"SUNW,UltraSPARC-T2" at mainbus0 not configured
"SUNW,UltraSPARC-T2" at mainbus0 not configured
"SUNW,UltraSPARC-T2" at mainbus0 not configured
vbus0 at mainbus0
"flashprom" at vbus0 not configured
vrng0 at vbus0
cbus0 at vbus0
vdsk0 at cbus0 chan 0x2: ivec 0x4, 0x5
scsibus0 at vdsk0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <SUN, Virtual Disk, 1.1>
sd0: 15360MB, 512 bytes/sector, 31457280 sectors
vnet0 at cbus0 chan 0x3: ivec 0x6, 0x7, address 00:14:4f:fb:ed:72
vcons0 at vbus0: ivec 0x111: console
vrtc0 at vbus0
softraid0 at root
scsibus1 at softraid0: 256 targets
bootpath: /virtual-devices@100,0/channel-devices@200,0/disk@0,0
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/sparc64 7.0 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? I
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [sun]
System hostname? (short form, e.g. 'foo') current
Available network interfaces are: vnet0 vlan0.
Which network interface do you wish to configure? (or 'done') [vnet0]
IPv4 address for vnet0? (or 'autoconf' or 'none') [autoconf]
IPv6 address for vnet0? (or 'autoconf' or 'none') [none]
Available network interfaces are: vnet0 vlan0.
Which network interface do you wish to configure? (or 'done') [done]
Using DNS domainname 0x30.net
Using DNS nameservers at 192.168.4.254
Password for root account? (will not echo)
Password for root account? (again)
The root password must be set.
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no]
Since no user was setup, root logins via sshd(8) might be useful.
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no]
What timezone are you in? ('?' for list) [Canada/Pacific]
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0]
The auto-allocated layout for sd0 is:
# size offset fstype [fsize bsize cpg]
a: 378.9M 0 4.2BSD 2048 16384 1 # /
b: 537.8M 775968 swap
c: 15360.0M 0 unused
d: 486.2M 1877408 4.2BSD 2048 16384 1 # /tmp
e: 675.1M 2873184 4.2BSD 2048 16384 1 # /var
f: 1957.8M 4255840 4.2BSD 2048 16384 1 # /usr
g: 521.3M 8265408 4.2BSD 2048 16384 1 # /usr/X11R6
h: 1710.7M 9333088 4.2BSD 2048 16384 1 # /usr/local
i: 1391.5M 12836576 4.2BSD 2048 16384 1 # /usr/src
j: 5303.1M 15686464 4.2BSD 2048 16384 1 # /usr/obj
k: 2397.5M 26547232 4.2BSD 2048 16384 1 # /home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] a
disklabel: DIOCWDINFO: Invalid argument
The auto-allocated layout for sd0 is:
... goes back to asking for layout ...
Here's the auto-allocated layout on the same disk for the successful
miniroot69.img, it is slightly different:
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0]
The auto-allocated layout for sd0 is:
# size offset fstype [fsize bsize cpg]
a: 384.4M 0 4.2BSD 2048 16384 1 # /
b: 541.3M 787185 swap
c: 15360.0M 0 unused
d: 486.3M 1895670 4.2BSD 2048 16384 1 # /tmp
e: 682.4M 2891700 4.2BSD 2048 16384 1 # /var
f: 1961.1M 4289355 4.2BSD 2048 16384 1 # /usr
g: 525.6M 8305605 4.2BSD 2048 16384 1 # /usr/X11R6
h: 1717.9M 9381960 4.2BSD 2048 16384 1 # /usr/local
i: 1396.3M 12900195 4.2BSD 2048 16384 1 # /usr/src
j: 5310.5M 15759765 4.2BSD 2048 16384 1 # /usr/obj
k: 2353.3M 26635770 4.2BSD 2048 16384 1 # /home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
Kyle
