This wasn't the case on OpenBSD 6.9 with older version of Firefox (although FF
on 6.9 had other issues, like slow tab switching, which is still present in
tor-browser-10.5.5 but is fixed in FF 93). When I installed Firefox 93 and did
customizations, installed addons, I tried to load odysee.com. After a while the
tab crashed with a "Gah. Your tab just crashed." screen.
Thinking that it was an issue with some of the about:config settings I changed,
or some addon I installed, I tried Menu - Help - Troubleshoot mode. To my
surprise, tab crashed even on troubleshooting mode. (Screenshot attached, which
shows that I'm in troubleshooting mode when tab crashed) I tried to refresh
Firefox after renaming my ~/.mozilla/firefox to let it create a new profile -
but it didn't help. Tried increasing ulimit from login.conf from 512 to 2048,
didn't help either. So the problem should be somewhere else, not my changes or
addons.
<https://libredd.it/r/openbsd/comments/mphsg8/firefox_tabs_crashing/> says to
disable webgl (change webgl.disabled to true on about:config) but it didn't
help.
One thing I noticed is that first time I tried odysee.com, it used to crash on
JS loading animation thingy that the page shows. When I kept trying to load it
again and again, it gradually delayed the crash every time. e.g. loading the
thumbnails and then crash... next time loading some more thumbnails and then
crash... next time loading all the thumbnails but when login page is visited
then crashed and so on. This timing resets after rebooting the system
(restarting FF doesn't reset the crash time for some reason). This initially
got me suspect if it was due to something system related, not Firefox. So I
tried with ulimit, but as I've mentioned, increasing it didn't help.
Sometimes if I have other tabs open which work fine without issues other times,
starts to crash when odysee.com tab crashes. For example I can have a Searx tab
open and it works ok all day long, but when odysee.com tab crashes, the Searx
tab also crashes. It doesn't happen always but sometimes.
One thing I do need to note that this crash is not limited to odysee.com only.
Other sites that cause tab crash include:
- https://mail.tutanota.com
- https://mail.protonmail.com
- https://news.itsfoss.com/
- and gitlab.com sign in page https://gitlab.com/users/sign_in (doesn't crash
on the homepage, only login page).
These URLs load fine on Iridium just fine.
I ran pkg_add -Uu before submitting this report and the issue is still there.
Another issue I don't know if it's related is that my password manager addon
doesn't work in FF 93 on OBSD. It can show it's popup menu, but can't list the
site's password(s). It works fine on Iridium 2021.06.91 on OBSD and Librewolf
on GNU+Linux.
This is on a fresh new install of OpenBSD 7.0 just done some days ago after it
was released. It is inside encrypted (softraidfde) on a 32gb USB flash drive,
with 2gb swap and around 27gb for /. The machine is ThinkPad x201i with i3 CPU
with 4gb of RAM.
## Steps to reproduce:
1. Start Firefox
2. Visit https://odysee.com
3. Wait for a few seconds
## Current result:
Shows a "Gah. Your tab just crashed." error page after a while.
If it doesn't crash for some reason, go to sign in page and try to sign in and
it crashes for sure.
## Expected outcome:
Load the page without errors showing and don't crash the tab
OpenBSD 7.0 (GENERIC.MP) #232: Thu Sep 30 14:25:29 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4062691328 (3874MB)
avail mem = 3923525632 (3741MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET70WW (1.40 )" date 10/11/2012
bios0: LENOVO 3323K2M
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4)
EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.33 MHz, 06-25-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.02 MHz, 06-25-02
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 UNCR
acpipci1 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "92P1137" serial 2931 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2128 MHz: speeds: 2133, 1999, 1866, 1733, 1599, 1466,
1333, 1199, 1066, 933 MHz
pci0 at mainbus0 bus 255
pchb0 at pci0 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb1 at pci0 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb2 at pci0 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb3 at pci0 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb4 at pci0 dev 2 function 2 "Intel Reserved" rev 0x02
pchb5 at pci0 dev 2 function 3 "Intel Reserved" rev 0x02
pci1 at mainbus0 bus 0
pchb6 at pci1 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci1 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi, IRONLAKE, gen 5
"Intel 3400 MEI" rev 0x06 at pci1 dev 22 function 0 not configured
em0 at pci1 dev 25 function 0 "Intel 82577LC" rev 0x06: msiem0: The EEPROM
Checksum Is Not Valid
em0: Unable to initialize the hardware
ehci0 at pci1 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci1 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci1 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb0 bus 13
ppb1 at pci1 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb1 bus 5
ppb2 at pci1 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb2 bus 2
iwn0 at pci4 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi,
MIMO 2T2R, MoW, address 58:94:6b:08:7b:b0
ehci1 at pci1 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci1 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci5 at ppb3 bus 14
pcib0 at pci1 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci1 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TS256GSSD230S, P102>
t10.ATA_TS256GSSD230S_01076388D61701790070
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci1 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
itherm0 at pci1 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4, 0x1e0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
umass0 at uhub2 port 1 configuration 1 interface 0 "ADATA ADATA USB Flash
Drive" rev 2.10/11.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <ADATA, USB Flash Drive, 1100> removable
serial.125fdb8a3153300900C4
sd1: 29600MB, 512 bytes/sector, 60620800 sectors
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 4
uhub2: device problem, disabling port 6
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 29596MB, 512 bytes/sector, 60612653 sectors
root on sd2a (921cd32fd0f5c2b4.a) swap on sd2b dump on sd2b
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
urndis0 detached
uhub3: device problem, disabling port 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
uhub3: device problem, disabling port 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
uhub2: device problem, disabling port 2
uhub2: device problem, disabling port 2
uhub2: port 2 reset failed
uhub2: device problem, disabling port 2
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
umass1 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <__Some, unrelated mobile device id__, 0000>
removable
sd4 at scsibus5 targ 1 lun 1: <__Some, unrelated mobile device id__, 0000>
removable
sd4 detached
sd3 detached
scsibus5 detached
umass1 detached
uhub3: device problem, disabling port 2
uhub3: port 2, set config 0 at addr 3 failed
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
umass1 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <__Some, unrelated mobile device id__, 0000>
removable
sd4 at scsibus5 targ 1 lun 1: <__Some, unrelated mobile device id__, 0000>
removable
sd4 detached
sd3 detached
scsibus5 detached
umass1 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
syncing disks... done
rebooting...
OpenBSD 7.0 (GENERIC.MP) #232: Thu Sep 30 14:25:29 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4062691328 (3874MB)
avail mem = 3923525632 (3741MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET70WW (1.40 )" date 10/11/2012
bios0: LENOVO 3323K2M
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4)
EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.42 MHz, 06-25-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 UNCR
acpipci1 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "92P1137" serial 2931 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2128 MHz: speeds: 2133, 1999, 1866, 1733, 1599, 1466,
1333, 1199, 1066, 933 MHz
pci0 at mainbus0 bus 255
pchb0 at pci0 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb1 at pci0 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb2 at pci0 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb3 at pci0 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb4 at pci0 dev 2 function 2 "Intel Reserved" rev 0x02
pchb5 at pci0 dev 2 function 3 "Intel Reserved" rev 0x02
pci1 at mainbus0 bus 0
pchb6 at pci1 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci1 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi, IRONLAKE, gen 5
"Intel 3400 MEI" rev 0x06 at pci1 dev 22 function 0 not configured
em0 at pci1 dev 25 function 0 "Intel 82577LC" rev 0x06: msiem0: The EEPROM
Checksum Is Not Valid
em0: Unable to initialize the hardware
ehci0 at pci1 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci1 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci1 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb0 bus 13
ppb1 at pci1 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb1 bus 5
ppb2 at pci1 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb2 bus 2
iwn0 at pci4 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi,
MIMO 2T2R, MoW, address 58:94:6b:08:7b:b0
ehci1 at pci1 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci1 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci5 at ppb3 bus 14
pcib0 at pci1 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci1 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TS256GSSD230S, P102>
t10.ATA_TS256GSSD230S_01076388D61701790070
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci1 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
itherm0 at pci1 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4, 0x1e0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
umass0 at uhub2 port 1 configuration 1 interface 0 "ADATA ADATA USB Flash
Drive" rev 2.10/11.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <ADATA, USB Flash Drive, 1100> removable
serial.125fdb8a3153300900C4
sd1: 29600MB, 512 bytes/sector, 60620800 sectors
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 4
uhub2: device problem, disabling port 6
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 29596MB, 512 bytes/sector, 60612653 sectors
root on sd2a (921cd32fd0f5c2b4.a) swap on sd2b dump on sd2b
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
urndis0 detached
umass1 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <__Some, unrelated mobile device id__, 0000>
removable
sd4 at scsibus5 targ 1 lun 1: <__Some, unrelated mobile device id__, 0000>
removable
sd4 detached
sd3 detached
scsibus5 detached
umass1 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 6a:17:64:74:81:b1
OpenBSD 7.0 (GENERIC.MP) #232: Thu Sep 30 14:25:29 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4062691328 (3874MB)
avail mem = 3923525632 (3741MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET70WW (1.40 )" date 10/11/2012
bios0: LENOVO 3323K2M
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4)
EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.33 MHz, 06-25-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.02 MHz, 06-25-02
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 UNCR
acpipci1 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "92P1137" serial 2931 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2128 MHz: speeds: 2133, 1999, 1866, 1733, 1599, 1466,
1333, 1199, 1066, 933 MHz
pci0 at mainbus0 bus 255
pchb0 at pci0 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb1 at pci0 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb2 at pci0 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb3 at pci0 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb4 at pci0 dev 2 function 2 "Intel Reserved" rev 0x02
pchb5 at pci0 dev 2 function 3 "Intel Reserved" rev 0x02
pci1 at mainbus0 bus 0
pchb6 at pci1 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci1 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi, IRONLAKE, gen 5
"Intel 3400 MEI" rev 0x06 at pci1 dev 22 function 0 not configured
em0 at pci1 dev 25 function 0 "Intel 82577LC" rev 0x06: msiem0: The EEPROM
Checksum Is Not Valid
em0: Unable to initialize the hardware
ehci0 at pci1 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci1 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci1 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb0 bus 13
ppb1 at pci1 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb1 bus 5
ppb2 at pci1 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb2 bus 2
iwn0 at pci4 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi,
MIMO 2T2R, MoW, address 58:94:6b:08:7b:b0
ehci1 at pci1 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci1 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci5 at ppb3 bus 14
pcib0 at pci1 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci1 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TS256GSSD230S, P102>
t10.ATA_TS256GSSD230S_01076388D61701790070
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci1 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
itherm0 at pci1 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4, 0x1e0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
umass0 at uhub2 port 1 configuration 1 interface 0 "ADATA ADATA USB Flash
Drive" rev 2.10/11.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <ADATA, USB Flash Drive, 1100> removable
serial.125fdb8a3153300900C4
sd1: 29600MB, 512 bytes/sector, 60620800 sectors
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 4
uhub2: device problem, disabling port 6
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 29596MB, 512 bytes/sector, 60612653 sectors
root on sd2a (921cd32fd0f5c2b4.a) swap on sd2b dump on sd2b
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
urndis0 detached
uhub3: device problem, disabling port 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
uhub3: device problem, disabling port 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address 9e:f7:58:0d:ea:08
urndis0 detached
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
uhub2: device problem, disabling port 2
uhub2: device problem, disabling port 2
uhub2: port 2 reset failed
uhub2: device problem, disabling port 2
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
umass1 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <__Some, unrelated mobile device id__, 0000>
removable
sd4 at scsibus5 targ 1 lun 1: <__Some, unrelated mobile device id__, 0000>
removable
sd4 detached
sd3 detached
scsibus5 detached
umass1 detached
uhub3: device problem, disabling port 2
uhub3: port 2, set config 0 at addr 3 failed
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
uhub3: device problem, disabling port 2
umass1 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <__Some, unrelated mobile device id__, 0000>
removable
sd4 at scsibus5 targ 1 lun 1: <__Some, unrelated mobile device id__, 0000>
removable
sd4 detached
sd3 detached
scsibus5 detached
umass1 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
urndis0 detached
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
syncing disks... done
rebooting...
OpenBSD 7.0 (GENERIC.MP) #232: Thu Sep 30 14:25:29 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4062691328 (3874MB)
avail mem = 3923525632 (3741MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET70WW (1.40 )" date 10/11/2012
bios0: LENOVO 3323K2M
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4)
EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.42 MHz, 06-25-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, 2128.01 MHz, 06-25-02
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 UNCR
acpipci1 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "92P1137" serial 2931 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2128 MHz: speeds: 2133, 1999, 1866, 1733, 1599, 1466,
1333, 1199, 1066, 933 MHz
pci0 at mainbus0 bus 255
pchb0 at pci0 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb1 at pci0 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb2 at pci0 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb3 at pci0 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb4 at pci0 dev 2 function 2 "Intel Reserved" rev 0x02
pchb5 at pci0 dev 2 function 3 "Intel Reserved" rev 0x02
pci1 at mainbus0 bus 0
pchb6 at pci1 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci1 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi, IRONLAKE, gen 5
"Intel 3400 MEI" rev 0x06 at pci1 dev 22 function 0 not configured
em0 at pci1 dev 25 function 0 "Intel 82577LC" rev 0x06: msiem0: The EEPROM
Checksum Is Not Valid
em0: Unable to initialize the hardware
ehci0 at pci1 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci1 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci1 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb0 bus 13
ppb1 at pci1 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb1 bus 5
ppb2 at pci1 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb2 bus 2
iwn0 at pci4 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi,
MIMO 2T2R, MoW, address 58:94:6b:08:7b:b0
ehci1 at pci1 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci1 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci5 at ppb3 bus 14
pcib0 at pci1 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci1 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TS256GSSD230S, P102>
t10.ATA_TS256GSSD230S_01076388D61701790070
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci1 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
itherm0 at pci1 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4, 0x1e0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
umass0 at uhub2 port 1 configuration 1 interface 0 "ADATA ADATA USB Flash
Drive" rev 2.10/11.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <ADATA, USB Flash Drive, 1100> removable
serial.125fdb8a3153300900C4
sd1: 29600MB, 512 bytes/sector, 60620800 sectors
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 4
uhub2: device problem, disabling port 6
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
urndis0 at uhub3 port 2 configuration 1 interface 0 "__Some unrelated mobile
device id__" rev 2.00/2.55 addr 3
urndis0: using RNDIS, address __Some address__
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 29596MB, 512 bytes/sector, 60612653 sectors
root on sd2a (921cd32fd0f5c2b4.a) swap on sd2b dump on sd2b
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
