> Date: Fri, 5 Nov 2021 14:59:05 +0000 > From: Stuart Henderson <[email protected]> > > On 2021/11/05 09:32, Paul de Weerd wrote: > > Linking brcmfmac43455-sdio.raspberrypi,4-model-b.txt (which is what is > > used with u-boot, I believe) to this name in /etc/firmware fixed bwfm0 > > for me (although performance isn't great, but that's also the case > > when using u-boot). > > btw I *don't* have that problem (1.31 here). wlan performance isn't great > either (70Mb on VHT-MCS0 mode 11ac / -45dBm reported) but usable. > (ethernet performance OTOH *is* pretty good - ~800Mb).
Paul, Go into the firmware configuration menu and switch from ACPI to Device Tree (DT). That is what Stuart is using and should fix the wifi problem. > OpenBSD 7.0-current (GENERIC.MP) #1374: Wed Nov 3 15:40:43 MDT 2021 > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > real mem = 4134588416 (3943MB) > avail mem = 3975053312 (3790MB) > random: good seed from bootblocks > mainbus0 at root: Raspberry Pi 4 Model B Rev 1.2 > psci0 at mainbus0: PSCI 1.1, SMCCC 1.2 > cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3 > cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache > cpu0: 1024KB 64b/line 16-way L2 cache > cpu0: CRC32,ASID16 > cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3 > cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache > cpu1: 1024KB 64b/line 16-way L2 cache > cpu1: CRC32,ASID16 > cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3 > cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache > cpu2: 1024KB 64b/line 16-way L2 cache > cpu2: CRC32,ASID16 > cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3 > cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache > cpu3: 1024KB 64b/line 16-way L2 cache > cpu3: CRC32,ASID16 > efi0 at mainbus0: UEFI 2.7 > efi0: https://github.com/pftf/RPi4 rev 0x10000 > smbios0 at efi0: SMBIOS 3.3.0 > smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.31" > date 09/09/2021 > smbios0: Raspberry Pi Foundation Raspberry Pi 4 Model B > apm0 at mainbus0 > "system" at mainbus0 not configured > "axi" at mainbus0 not configured > simplebus0 at mainbus0: "soc" > bcmclock0 at simplebus0 > bcmmbox0 at simplebus0 > bcmgpio0 at simplebus0 > bcmaux0 at simplebus0 > ampintc0 at simplebus0 nirq 256, ncpu 4 ipi: 0, 1: "interrupt-controller" > bcmtmon0 at simplebus0 > bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 > "timer" at simplebus0 not configured > pluart0 at simplebus0: console > com0 at simplebus0: ns16550, no working fifo > "local_intc" at simplebus0 not configured > bcmdog0 at simplebus0 > bcmirng0 at simplebus0 > "firmware" at simplebus0 not configured > "power" at simplebus0 not configured > "mailbox" at simplebus0 not configured > sdhc0 at simplebus0 > sdhc0: SDHC 3.0, 250 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed > "gpiomem" at simplebus0 not configured > "fb" at simplebus0 not configured > "vcsm" at simplebus0 not configured > "clocks" at mainbus0 not configured > "phy" at mainbus0 not configured > "clk-27M" at mainbus0 not configured > "clk-108M" at mainbus0 not configured > simplebus1 at mainbus0: "emmc2bus" > sdhc1 at simplebus1 > sdhc1: SDHC 3.0, 100 MHz base clock > sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma > "arm-pmu" at mainbus0 not configured > agtimer0 at mainbus0: 54000 kHz > simplebus2 at mainbus0: "scb" > bcmpcie0 at simplebus2 > pci0 at bcmpcie0 > ppb0 at pci0 dev 0 function 0 "Broadcom BCM2711" rev 0x10 > pci1 at ppb0 bus 1 > xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 > addr 1 > bse0 at simplebus2: address dc:a6:32:8b:e1:b7 > brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2 > "dma" at simplebus2 not configured > "hevc-decoder" at simplebus2 not configured > "rpivid-local-intc" at simplebus2 not configured > "h264-decoder" at simplebus2 not configured > "vp9-decoder" at simplebus2 not configured > gpioleds0 at mainbus0: no LEDs > "sd_io_1v8_reg" at mainbus0 not configured > "sd_vcc_reg" at mainbus0 not configured > "fixedregulator_3v3" at mainbus0 not configured > "fixedregulator_5v0" at mainbus0 not configured > simplebus3 at mainbus0: "v3dbus" > "bootloader" at mainbus0 not configured > dt: 445 probes > sdmmc1: can't enable card > uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev > 2.10/4.21 addr 2 > bwfm0 at sdmmc0 function 1 > manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 2 not configured > manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 3 not configured > uhub2 at uhub1 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/77.64 addr 3 > uhidev0 at uhub2 port 3 configuration 1 interface 0 "RDing TEMPerV1.4" rev > 2.00/0.01 addr 4 > uhidev0: iclass 3/1, 1 report id > ukbd0 at uhidev0 reportid 1: 8 variable keys, 5 key codes > wskbd0 at ukbd0 mux 1 > uhidev1 at uhub2 port 3 configuration 1 interface 1 "RDing TEMPerV1.4" rev > 2.00/0.01 addr 4 > uhidev1: iclass 3/1 > ugold0 at uhidev1 > uhub3 at uhub2 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/77.64 addr 5 > uftdi0 at uhub3 port 1 configuration 1 interface 0 "FTDI FT232R USB UART" rev > 2.00/6.00 addr 6 > ucom0 at uftdi0 portno 1 > uslcom0 at uhub3 port 2 configuration 1 interface 0 "Silicon Labs CP2102 USB > to UART Bridge Controller" rev 1.10/1.00 addr 7 > ucom1 at uslcom0 portno 0 > uplcom0 at uhub3 port 4 configuration 1 interface 0 "Prolific Technology Inc. > USB-Serial Controller D" rev 1.10/4.00 addr 8 > ucom2 at uplcom0 > umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Ultra Fit" rev > 3.20/1.00 addr 9 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable > serial.0781558381079d269c03 > sd0: 29340MB, 512 bytes/sector, 60088320 sectors > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (a3d7f93f60aec212.a) swap on sd0b dump on sd0b > WARNING: clock lost 55 days > WARNING: CHECK AND RESET THE DATE! > gpio0 at bcmgpio0: 58 pins > bwfm0: address dc:a6:32:8b:e1:b8 > ugold0: 1 sensor type ds75/12bit (temperature) > >
