Just upgraded a standard test install in vmm(4) to the latest snap and
noticed new and garbled output:
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
intr_establish: pic pic0 pin 6: can't share type 3 with 2
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
...
reordering libraries:fdcresult: overrun
done.
...
No idea what this means, the VM works and I don't use fdc(4).
For completeness, the vmm host is the snapshot booting
OpenBSD 7.0-current (GENERIC.MP) #52: Mon Oct 25 10:15:58 MDT 2021
and has vmm-firmware-1.14.0p0 installed.
I have been using vmm for years, this is the first time this happens.
Full bsd.sp dmesg:
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 510M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.53
\
com0: 115200 baud
switching console to com0
>> OpenBSD/amd64 BOOT 3.53
boot>
booting hd0a:/bsd: 14697752+3376136+347200+0+1163264
[1061452+128+1161000+874382]=0x15a3588
entry point at 0xffffffff81001000
[ using 3097992 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.0-current (GENERIC) #92: Fri Nov 12 18:23:33 MST 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 520081408 (495MB)
avail mem = 488517632 (465MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf36e0 (10 entries)
bios0: vendor SeaBIOS version "1.14.0p0-OpenBSD-vmm" date 01/01/2011
bios0: OpenBSD VMM
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2595.33 MHz, 06-3a-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,LONG,LAHF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: OpenBSD
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio1: address fe:e1:bb:d1:41:41
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio2
scsibus1 at vioblk0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 2048MB, 512 bytes/sector, 4194304 sectors
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00
vmmci0 at virtio3
virtio3: irq 7
isa0 at mainbus0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
intr_establish: pic pic0 pin 6: can't share type 3 with 2
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
dt: 445 probes
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (5f9e458ed30b39ab.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (5f9e458ed30b39ab.a): file system is clean; not checking
pf enabled
starting network
reordering libraries:fdcresult: overrun
done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Sat Nov 13 16:13:43 UTC 2021
OpenBSD/amd64 (test.my.domain) (tty00)
login:
