On Sat, Jan 15, 2022 at 09:00:44PM +0000, Mikolaj Kucharski wrote:
> On Sat, Jan 15, 2022 at 12:36:06PM -0800, Mike Larkin wrote:
> > On Sat, Jan 15, 2022 at 07:50:34PM +0100, Stefan Sperling wrote:
> > > On Sat, Jan 15, 2022 at 10:03:07AM -0700, Theo de Raadt wrote:
> > > > Additionally, the /boot code must be able to see that the disk contains
> > > > a hibernate signature, and this may not work if your swap partition
> > > > is at such a far into the disk.
> > > >
> > > > #                size           offset  fstype [fsize bsize   cpg]
> > > >   a:          1875.7G             1024    RAID
> > > >   b:            32.0G       3933688463    swap                    # none
> > > >
> > >
> > > This looks like a CRYPTO softraid volume and a separate swap partition.
> > > There is probably no swap partition configured inside softraid?
> > >
> > > Moving swap inside the softraid volume (as the installer would create
> > > by default) should be better. I have just successfully tested hibernate
> > > with such a setup on one my laptops, running -current and using EFI boot.
> > > Where the outer disklabel looks like this:
> > >
> > > #                size           offset  fstype [fsize bsize   cpg]
> > >   c:        500118192                0  unused
> > >   d:        500117105             1024    RAID
> > >   i:              960               64   MSDOS
> > >
> >
> > Could be! OP should show his swap configuration.
>
> I thought I did provide all the relevant information:
>
>       https://marc.info/?l=openbsd-bugs&m=164225828004153&w=2
>
> Unless I've missed something.
>
> $ dmesg | grep -e ^sd
> sd0 at scsibus1 targ 1 lun 0: <NVMe, SAMSUNG MZVL22T0, 6L2Q>
> sd0: 1953514MB, 512 bytes/sector, 4000797360 sectors
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 1920745MB, 512 bytes/sector, 3933686911 sectors
>
> # sysctl hw | grep mem
> hw.physmem=34036183040
> hw.usermem=33762852864
>
> # disklabel -pg sd0 | sed -ne '/^1/,$p'
> 16 partitions:
> #                size           offset  fstype [fsize bsize   cpg]
>   a:          1875.7G             1024    RAID
>   b:            32.0G       3933688463    swap                    # none
>   c:          1907.7G                0  unused
>   i:             0.0G               64   MSDOS
>
> # disklabel -pg sd1 | sed -ne '/^1/,$p'
> 16 partitions:
> #                size           offset  fstype [fsize bsize   cpg]
>   a:             1.0G               64  4.2BSD   2048 16384 12960 # /
>   c:          1875.7G                0  unused
>   d:             4.0G          2104512  4.2BSD   2048 16384 12960 # /tmp
>   e:             8.0G         10506496  4.2BSD   2048 16384 12960 # /usr
>   f:             1.0G         27294432  4.2BSD   2048 16384 12960 # /usr/X11R6
>   g:            25.0G         29398944  4.2BSD   2048 16384 12960 # /usr/local
>   h:            15.0G         81835104  4.2BSD   2048 16384 12960 # /var
>   i:             5.0G        113306432  4.2BSD   2048 16384 12960 # /usr/src
>   j:            10.0G        123796864  4.2BSD   2048 16384 12960 # /usr/obj
>   k:           250.0G        144777792  4.2BSD   4096 32768 26062 # /home
>   l:          1556.7G        669075072  4.2BSD   8192 65536 52270 # /data
>
>
> # sysctl -n vm.swapencrypt.enable
> 1
>
> I'm wondering what is recommended setup for swap with full disk
> encryption. Because swap is encrypted by default I decided to put
> it outside of softraid crypto - sd0b, where OpenBSD is on sd1a and
> I guess kernel expects swap to be on sd1b:
>
> # dmesg | grep swap
> root on sd1a (091f997bd652ed0b.a) swap on sd1b dump on sd1b

but you have no 'b' on sd1, so this is likely why you're failing.

>
> If I put swap insite softraid crypto should I disable swap encryption
> via sysctl vm.swapencrypt.enable=0, is swap data encrypted twice, with
> vm.swapencrypt.enable=1?
>
> I went throught FAQ in the past:
>
> https://www.openbsd.org/faq/faq14.html#softraidFDE
>
> and I guess I should at the time ask all those above questions. I
> probably should re-read it again, to make sure is there any
> clarification there about what is recommented swap setup with FDE.
>

If you're using SR crypto, just put everything inside the SR crypto
disk.

> # cat /etc/fstab
> 3c62f18ee2890970.b none swap sw 0 0
> 091f997bd652ed0b.a / ffs rw 1 1
> 091f997bd652ed0b.l /data ffs rw,nodev,nosuid 1 2
> 091f997bd652ed0b.k /home ffs rw,nodev,nosuid 1 2
> 091f997bd652ed0b.d /tmp ffs rw,nodev,nosuid 1 2
> 091f997bd652ed0b.e /usr ffs rw,nodev 1 2
> 091f997bd652ed0b.f /usr/X11R6 ffs rw,nodev 1 2
> 091f997bd652ed0b.g /usr/local ffs rw,wxallowed,nodev 1 2
> 091f997bd652ed0b.j /usr/obj ffs rw,nodev,nosuid 1 2
> 091f997bd652ed0b.i /usr/src ffs rw,nodev,nosuid 1 2
> 091f997bd652ed0b.h /var ffs rw,nodev,nosuid 1 2
>
>
>
> Full dmesg after failed ZZZ:
>
> OpenBSD 7.0-current (GENERIC.MP) #252: Thu Jan 13 10:07:03 MST 2022
>     [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 34036183040 (32459MB)
> avail mem = 32988667904 (31460MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x900b0000 (76 entries)
> bios0: vendor LENOVO version "N32ET75W (1.51 )" date 12/02/2021
> bios0: LENOVO 20XWCTO1WW
> acpi0 at bios0: ACPI 6.1
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT TPM2 SSDT ECDT HPET APIC SSDT 
> SSDT SSDT NHLT SSDT SSDT SSDT LPIT WSMT SSDT DBGP DBG2 POAT SSDT BATB MCFG 
> SSDT ASF! BGRT PTDT UEFI FPDT
> acpi0: wakeup devices PEG0(S4) PEGP(S4) PEGP(S4) PEGP(S4) XHCI(S3) XDCI(S4) 
> HDAS(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) 
> PXSX(S4) RP05(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpihpet0 at acpi0: 19200000 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.33 MHz, 06-8c-01
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu0: 256KB 64b/line disabled L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 38MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.0.1.2.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.34 MHz, 06-8c-01
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu1: 256KB 64b/line disabled L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.34 MHz, 06-8c-01
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu2: 256KB 64b/line disabled L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.34 MHz, 06-8c-01
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu3: 256KB 64b/line disabled L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.34 MHz, 06-8c-01
> cpu4: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu4: 256KB 64b/line disabled L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.34 MHz, 06-8c-01
> cpu5: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu5: 256KB 64b/line disabled L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.34 MHz, 06-8c-01
> cpu6: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu6: 256KB 64b/line disabled L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: 11th Gen Intel(R) Core(TM) i7-1185G7 @ 3.00GHz, 2893.34 MHz, 06-8c-01
> cpu7: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu7: 256KB 64b/line disabled L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xc0000000, bus 0-121
> acpiprt0 at acpi0: bus 0 (PC00)
> acpiprt1 at acpi0: bus 4 (PEG0)
> acpiprt2 at acpi0: bus 8 (RP01)
> acpiprt3 at acpi0: bus -1 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP05)
> acpiprt7 at acpi0: bus -1 (RP06)
> acpiprt8 at acpi0: bus -1 (RP07)
> acpiprt9 at acpi0: bus -1 (RP08)
> acpiprt10 at acpi0: bus -1 (RP09)
> acpiprt11 at acpi0: bus -1 (RP10)
> acpiprt12 at acpi0: bus -1 (RP11)
> acpiprt13 at acpi0: bus -1 (RP12)
> acpiprt14 at acpi0: bus -1 (RP13)
> acpiprt15 at acpi0: bus -1 (RP14)
> acpiprt16 at acpi0: bus -1 (RP15)
> acpiprt17 at acpi0: bus -1 (RP16)
> acpiprt18 at acpi0: bus -1 (RP17)
> acpiprt19 at acpi0: bus -1 (RP18)
> acpiprt20 at acpi0: bus -1 (RP19)
> acpiprt21 at acpi0: bus -1 (RP20)
> acpiprt22 at acpi0: bus -1 (RP21)
> acpiprt23 at acpi0: bus -1 (RP22)
> acpiprt24 at acpi0: bus -1 (RP23)
> acpiprt25 at acpi0: bus -1 (RP24)
> acpiprt26 at acpi0: bus 32 (TRP1)
> acpiprt27 at acpi0: bus 80 (TRP2)
> acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
> acpithinkpad0 at acpi0: version 2.0
> acpiac0 at acpi0: AC unit offline
> acpibat0 at acpi0: BAT0 model "5B10W13973" serial  1283 type LiP oem "SMP"
> "INT33D3" at acpi0 not configured
> "LEN0111" at acpi0 not configured
> "LEN0100" at acpi0 not configured
> "INTC1043" at acpi0 not configured
> "INTC1043" at acpi0 not configured
> "INTC1043" at acpi0 not configured
> "LEN0130" at acpi0 not configured
> "LEN0112" at acpi0 not configured
> "ELAN0673" at acpi0 not configured
> "NXP1001" at acpi0 not configured
> "ACPI000E" at acpi0 not configured
> pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 
> 0xfd6a0000/0x10000 0xfd690000/0x10000 irq 14, 360 pins
> acpibtn0 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT33A1" at acpi0 not configured
> "INTC1051" at acpi0 not configured
> acpibtn1 at acpi0: LID_
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn2 at acpi0: PWRB
> "INTC1040" at acpi0 not configured
> tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 
> 0x16
> "USBC000" at acpi0 not configured
> acpipwrres0 at acpi0: PXP_, resource for PEG0
> acpipwrres1 at acpi0: PUBS, resource for XHCI
> acpipwrres2 at acpi0: BTPR, resource for HS10
> acpipwrres3 at acpi0: MRST
> acpipwrres4 at acpi0: DRST
> acpipwrres5 at acpi0: PXP_, resource for RP01
> acpipwrres6 at acpi0: PXP_, resource for RP05
> acpipwrres7 at acpi0: V0PR
> acpipwrres8 at acpi0: V1PR
> acpipwrres9 at acpi0: V2PR
> acpipwrres10 at acpi0: WRST
> acpipwrres11 at acpi0: TBT0, resource for TDM0, TRP0, TRP1
> acpipwrres12 at acpi0: TBT1, resource for TDM1, TRP2, TRP3
> acpipwrres13 at acpi0: D3C_, resource for TXHC, TDM0, TDM1, TRP0, TRP1, TRP2, 
> TRP3
> acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpicpu4 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpicpu5 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpicpu6 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpicpu7 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), 
> C1(1000@1 mwait.1), PSS
> acpitz0 at acpi0: critical temperature is 128 degC
> acpipwrres14 at acpi0: PIN_
> acpipwrres15 at acpi0: PINP
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> acpivout1 at acpivideo0: DD2F
> cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2901, 2900, 2800, 2600, 2400, 
> 2300, 2100, 1800, 1700, 1500, 1200, 1100, 1000, 800, 600, 400 MHz
> pci0 at mainbus0 bus 0
> 0:31:5: mem address conflict 0xfe010000/0x1000
> pchb0 at pci0 dev 0 function 0 "Intel Core 11G Host" rev 0x01
> inteldrm0 at pci0 dev 2 function 0 "Intel Xe Graphics" rev 0x01
> drm0 at inteldrm0
> inteldrm0: msi, TIGERLAKE, gen 12
> "Intel Core 11G DTT" rev 0x01 at pci0 dev 4 function 0 not configured
> ppb0 at pci0 dev 6 function 0 "Intel Core 11G PCIE" rev 0x01: msi
> pci1 at ppb0 bus 4
> nvme0 at pci1 dev 0 function 0 "Samsung PM9A1 NVMe" rev 0x00: msix, NVMe 1.3
> nvme0: SAMSUNG MZVL22T0HBLB-00BL7, firmware 6L2QGXB7, serial S64SNF0R311602
> scsibus1 at nvme0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <NVMe, SAMSUNG MZVL22T0, 6L2Q>
> sd0: 1953514MB, 512 bytes/sector, 4000797360 sectors
> ppb1 at pci0 dev 7 function 0 "Intel Core 11G PCIE" rev 0x01: msi
> pci2 at ppb1 bus 32
> ppb2 at pci0 dev 7 function 2 "Intel Core 11G PCIE" rev 0x01: msi
> pci3 at ppb2 bus 80
> "Intel Core 11G GNA" rev 0x01 at pci0 dev 8 function 0 not configured
> "Intel Core 11G SRAM" rev 0x01 at pci0 dev 10 function 0 not configured
> xhci0 at pci0 dev 13 function 0 "Intel Core 11G xHCI" rev 0x01: msi, xHCI 1.20
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
> addr 1
> "Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 2 not configured
> "Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 3 not configured
> xhci1 at pci0 dev 20 function 0 "Intel 500 Series xHCI" rev 0x20: msi, xHCI 
> 1.20
> usb1 at xhci1: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
> addr 1
> "Intel 500 Series Shared SRAM" rev 0x20 at pci0 dev 20 function 2 not 
> configured
> iwx0 at pci0 dev 20 function 3 "Intel Wi-Fi 6 AX201" rev 0x20, msix
> dwiic0 at pci0 dev 21 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 
> 27
> iic0 at dwiic0
> ihidev0 at iic0 addr 0x15 irq 118, vendor 0x4f3 product 0x3188, ELAN0673
> ihidev0: 14 report ids
> imt0 at ihidev0: clickpad, 5 contacts
> wsmouse0 at imt0 mux 0
> ims0 at ihidev0 reportid 1: 2 buttons
> wsmouse1 at ims0 mux 0
> hid at ihidev0 reportid 5 not configured
> hid at ihidev0 reportid 6 not configured
> hid at ihidev0 reportid 7 not configured
> hid at ihidev0 reportid 11 not configured
> hid at ihidev0 reportid 12 not configured
> hid at ihidev0 reportid 13 not configured
> ims1 at ihidev0 reportid 14: 0 buttons
> wsmouse2 at ims1 mux 0
> dwiic1 at pci0 dev 21 function 3 "Intel 500 Series I2C" rev 0x20: apic 2 int 
> 30
> iic1 at dwiic1
> "NXP1001" at iic1 addr 0x29 not configured
> "Intel 500 Series HECI" rev 0x20 at pci0 dev 22 function 0 not configured
> puc0 at pci0 dev 22 function 3 "Intel 500 Series KT" rev 0x20: ports: 16 com
> com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
> ppb3 at pci0 dev 28 function 0 "Intel 500 Series PCIE" rev 0x20: msi
> pci4 at ppb3 bus 8
> "Quectel EM120R-GL" rev 0x00 at pci4 dev 0 function 0 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 500 Series eSPI" rev 0x20
> azalia0 at pci0 dev 31 function 3 "Intel 500 Series HD Audio" rev 0x20: msi
> azalia0: codecs: Realtek ALC287, Intel/0x2812, using Realtek ALC287
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 500 Series SMBus" rev 0x20: apic 2 
> int 16
> iic2 at ichiic0
> ichiic0: abort failed, status 0x41<BUSY,INUSE>
> "Intel 500 Series SPI" rev 0x20 at pci0 dev 31 function 5 not configured
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse3 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> efifb at mainbus0 not configured
> ugen0 at uhub1 port 3 "Synaptics product 0x00fc" rev 2.00/0.00 addr 2
> uvideo0 at uhub1 port 4 configuration 1 interface 0 "Sonix Technology Co., 
> Ltd. Integrated Camera" rev 2.01/10.22 addr 3
> video0 at uvideo0
> uvideo1 at uhub1 port 4 configuration 1 interface 2 "Sonix Technology Co., 
> Ltd. Integrated Camera" rev 2.01/10.22 addr 3
> video1 at uvideo1
> ugen1 at uhub1 port 10 "Intel Bluetooth" rev 2.01/0.02 addr 4
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 1920745MB, 512 bytes/sector, 3933686911 sectors
> root on sd1a (091f997bd652ed0b.a) swap on sd1b dump on sd1b
> inteldrm0: 3840x2400, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> iwx0: hw rev 0x350, fw ver 67.8f59b80b.0, address bc:09:1b:f2:db:9f
> uhub0 detached
> ugen0 detached
> video0 detached
> uvideo0 detached
> video1 detached
> uvideo1 detached
> ugen1 detached
> uhub1 detached
> acpi0: hibernate_suspend failed
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
> addr 1
> uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
> addr 1
> ugen0 at uhub1 port 3 "Synaptics product 0x00fc" rev 2.00/0.00 addr 2
> uvideo0 at uhub1 port 4 configuration 1 interface 0 "Sonix Technology Co., 
> Ltd. Integrated Camera" rev 2.01/10.22 addr 3
> video0 at uvideo0
> uvideo1 at uhub1 port 4 configuration 1 interface 2 "Sonix Technology Co., 
> Ltd. Integrated Camera" rev 2.01/10.22 addr 3
> video1 at uvideo1
> ugen1 at uhub1 port 10 "Intel Bluetooth" rev 2.01/0.02 addr 4
>
> --
> Regards,
>  Mikolaj

Reply via email to