On Fri, Jun 17, 2022 at 03:25:16PM -0700, David Rinehart wrote: > > On 6/15/22 23:24, Mike Larkin wrote: > > > > hibernate (s4) and suspend (s3) both use the exact same device quiesce > > sequence > > when preparing the machine for a power transition. If s4 works but s3 does > > not, I'd look at something in the bios at being at fault here. the bios on > > the machine is almost 4 years old, so please look for an update. > > > > Also, see below. > > > > -ml > > > Updated BIOS to latest version - no change for suspend or stand-by. > > > Below are the latest dmesg and other data. Included disk info (Swap, > /tmp & /var all sized just larger than physical memory). > > > After the update, BIOS now has an option to disable hyper-threading that > I do not recall seeing earlier. No option for Linux S3, like I've read > about for Thinkpads. > > > Found Lenovo support discussion for Linux on C930 and this mem_sleep > file change seems to make a difference in Linux (not sure if / how > similar may apply to OpenBSD): > > > |$ cat /sys/power/mem_sleep [s2idle] deep $ echo deep | sudo tee > /sys/power/mem_sleep deep $ # WARNING: deadlock ahead! $ systemctl suspend| > > > > https://github.com/droserasprout/lenovo-yoga-c930-linux#s0-s2idle-power-state-state-battery-drain > > > https://forums.lenovo.com/t5/Other-Linux-Discussions/Linux-compatibility-with-Yoga-C930/m-p/4267325?page=1 > > > The later messages in the support thread seem to indicate that sleep is > working for Linux, but no details. > > > I can install Linux, if it will help, to collect information but not > sure what to look for except to see if sleep is working. > > > Also, not sure if S0ix applies to the C930. > > > Thanks for help, so far, please let me know if I can provide any > additional information... >
Out of ideas. Sorry. > > -- /var/log/messages > > Jun 17 13:46:29 dTab reorder_kernel: kernel relinking done > Jun 17 13:52:11 dTab /bsd: video0 detached > Jun 17 13:52:11 dTab /bsd: uvideo0 detached > Jun 17 13:52:12 dTab /bsd: ugen0 detached > Jun 17 13:52:13 dTab /bsd: ugen1 detached > > -- apmd debug > > battery status: high. external power status: not connected. estimated > battery life 91% (370 minutes life time estimate) > can't disable driver messages, error: Inappropriate ioctl for device > apmevent 0000 index 0 > apmevent 0006 index 33 > system suspending > battery status: high. external power status: not connected. estimated > battery life 91% (367 minutes life time estimate) > do_etc_file(): cannot access file /etc/apm/suspend > > -- dmesg > > OpenBSD 7.1 (GENERIC.MP) #3: Sun May 15 10:27:01 MDT 2022 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 12707287040 (12118MB) > avail mem = 12304879616 (11734MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x3a0ac000 (69 entries) > bios0: vendor LENOVO version "8GCN37WW" date 11/23/2020 > bios0: LENOVO 81C4 > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP UEFI UEFI MSDM SSDT ASF! ASPT BOOT DBGP HPET > APIC MCFG SSDT LPIT WSMT SSDT SSDT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT > SSDT SSDT SSDT DMAR NHLT FPDT BGRT > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S3) > PXSX(S3) HRDP(S3) TDUS(S3) TDDP(S3) PXST(S3) RP02(S4) PXSX(S3) RP03(S4) > PXSX(S3) RP04(S4) PXSX(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 23999999 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz, 3990.70 MHz, 06-8e-0a > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz, 3990.71 MHz, 06-8e-0a > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz, 3691.41 MHz, 06-8e-0a > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz, 3691.41 MHz, 06-8e-0a > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus -1 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus 107 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus 108 (RP09) > acpiprt10 at acpi0: bus -1 (RP10) > acpiprt11 at acpi0: bus -1 (RP11) > acpiprt12 at acpi0: bus -1 (RP12) > acpiprt13 at acpi0: bus -1 (RP13) > acpiprt14 at acpi0: bus -1 (RP14) > acpiprt15 at acpi0: bus -1 (RP15) > acpiprt16 at acpi0: bus -1 (RP16) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpiec0 at acpi0 > acpiec0: Not running on HW-Reduced ACPI type 8 > acpi0: GPE 0x50 already enabled > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpibat0 at acpi0: BAT1 model "BASE-BAT" serial 123456789 type LiP oem > "Simplo" > "LIC0001" at acpi0 not configured > "VPC2004" at acpi0 not configured > "YMC2017" at acpi0 not configured > "INT33D3" at acpi0 not configured > acpibtn0 at acpi0: LID0 > "INT3403" at acpi0 not configured > acpicmos0 at acpi0 > pchgpio0 at acpi0 GPI0 addr 0xfdaf0000/0x10000 0xfdae0000/0x10000 > 0xfdac0000/0x10000 irq 14, 176 pins > "WCOM5196" at acpi0 not configured > "SYNA2B31" at acpi0 not configured > "ITE8353" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpiac0 at acpi0: AC unit offline > acpibtn1 at acpi0: PWRB > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "INT33A1" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "USBC000" at acpi0 not configured > "INT3400" at acpi0 not configured > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 119 degC > acpitz1 at acpi0: critical temperature is 119 degC > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > acpivout1 at acpivideo0: DD2F > cpu0: using VERW MDS workaround (except on vmm entry) > cpu0: Enhanced SpeedStep 3990 MHz: speeds: 2001, 2000, 1900, 1800, 1700, > 1500, 1400, 1300, 1200, 1100, 1000, 800, 700, 600, 500, 400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08 > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x07 > drm0 at inteldrm0 > inteldrm0: msi, KABYLAKE, gen 9 > "Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, > xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21 > dwiic0 at pci0 dev 21 function 0 "Intel 100 Series I2C" rev 0x21: apic 2 > int 16 > iic0 at dwiic0 > ihidev0 at iic0 addr 0xa irq 31, vendor 0x56a product 0x5196, WCOM5196 > ihidev0: 19 report ids > ims0 at ihidev0 reportid 1: 2 buttons > wsmouse0 at ims0 mux 0 > hid at ihidev0 reportid 2 not configured > hid at ihidev0 reportid 3 not configured > hid at ihidev0 reportid 4 not configured > hid at ihidev0 reportid 5 not configured > ims1 at ihidev0 reportid 6: 3 buttons, tip, barrel, eraser > wsmouse1 at ims1 mux 0 > hid at ihidev0 reportid 7 not configured > hid at ihidev0 reportid 8 not configured > hid at ihidev0 reportid 9 not configured > hid at ihidev0 reportid 10 not configured > hid at ihidev0 reportid 11 not configured > ims2 at ihidev0 reportid 12: 1 button, tip > wsmouse2 at ims2 mux 0 > hid at ihidev0 reportid 13 not configured > hid at ihidev0 reportid 14 not configured > hid at ihidev0 reportid 15 not configured > hid at ihidev0 reportid 16 not configured > hid at ihidev0 reportid 17 not configured > ims3 at ihidev0 reportid 19: 0 buttons > wsmouse3 at ims3 mux 0 > dwiic1 at pci0 dev 21 function 1 "Intel 100 Series I2C" rev 0x21: apic 2 > int 17 > iic1 at dwiic1 > ihidev1 at iic1 addr 0x2c gpio 27, vendor 0x6cb product 0xcd3e, SYNA2B31 > ihidev1: 14 report ids > imt0 at ihidev1: clickpad, 5 contacts > wsmouse4 at imt0 mux 0 > ims4 at ihidev1 reportid 2: 2 buttons > wsmouse5 at ims4 mux 0 > hid at ihidev1 reportid 6 not configured > hid at ihidev1 reportid 7 not configured > hid at ihidev1 reportid 9 not configured > hid at ihidev1 reportid 10 not configured > hid at ihidev1 reportid 11 not configured > hid at ihidev1 reportid 12 not configured > hid at ihidev1 reportid 13 not configured > hid at ihidev1 reportid 14 not configured > dwiic2 at pci0 dev 21 function 3 "Intel 100 Series I2C" rev 0x21: apic 2 > int 19 > iic2 at dwiic2 > ihidev2 at iic2 addr 0x5cdwiic2: timed out reading remaining 30 > , failed fetching initial HID descriptor > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured > "Intel 100 Series UART" rev 0x21 at pci0 dev 25 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi > pci2 at ppb1 bus 107 > iwm0 at pci2 dev 0 function 0 "Intel AC 8260" rev 0x3a, msi > ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi > pci3 at ppb2 bus 108 > nvme0 at pci3 dev 0 function 0 "Samsung SM981/PM981 NVMe" rev 0x00: > msix, NVMe 1.3 > nvme0: Samsung SSD 970 EVO Plus 500GB, firmware 1B2QEXM7, serial > xxxxxxxxxxxxxxx > scsibus1 at nvme0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 1B2Q> > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21 > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi > azalia0: codecs: Realtek ALC298, Intel/0x280b, using Realtek ALC298 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: > apic 2 int 20 > iic3 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x27 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > uvideo0 at uhub0 port 1 configuration 1 interface 0 "SunplusIT Inc > Integrated Camera" rev 2.01/17.11 addr 2 > video0 at uvideo0 > ugen0 at uhub0 port 5 "Synaptics product 0x0081" rev 2.00/1.64 addr 3 > ugen1 at uhub0 port 8 "Intel Bluetooth" rev 2.00/0.01 addr 4 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (c5b7677ea17a7494.a) swap on sd0b dump on sd0b > drm:pid0:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:102:DDI Z/PHY h] is disabled/in DSI mode with an ungated DDI > clock, gate it > drm:pid0:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:111:DDI Z/PHY h] is disabled/in DSI mode with an ungated DDI > clock, gate it > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > iwm0: hw rev 0x200, fw ver 36.ca7b901d.0, address xx:xx:xx:xx:xx:xx > > -- pcidump -v > > Domain /dev/pci0: > 0:0:0: Intel Core 8G Host > 0x0000: Vendor ID: 8086, Product ID: 5914 > 0x0004: Command: 0006, Status: 2090 > 0x0008: Class: 06 Bridge, Subclass: 00 Host, > Interface: 00, Revision: 08 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3821 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0x00e0: Capability 0x09: Vendor Specific > 0:2:0: Intel UHD Graphics 620 > 0x0000: Vendor ID: 8086, Product ID: 5917 > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 03 Display, Subclass: 00 VGA, > Interface: 00, Revision: 07 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000002ffa000000/0x01000000 > 0x0018: BAR mem prefetchable 64bit addr: 0x0000002fa0000000/0x10000000 > 0x0020: BAR io addr: 0x00003000/0x0040 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3803 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x09: Vendor Specific > 0x0070: Capability 0x10: PCI Express > Max Payload Size: 128 / 128 bytes > Max Read Request Size: 128 bytes > 0x0100: Enhanced Capability 0x1b: Process Address Space ID > 0x0200: Enhanced Capability 0x0f: Address Translation Services > 0x0300: Enhanced Capability 0x13: Page Request Interface > 0x00ac: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x00d0: Capability 0x01: Power Management > State: D0 > 0:4:0: Intel Core 6G Thermal > 0x0000: Vendor ID: 8086, Product ID: 1903 > 0x0004: Command: 0006, Status: 0090 > 0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 08 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000002ffb010000/0x00008000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 381c > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0090: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x00d0: Capability 0x01: Power Management > State: D0 > 0x00e0: Capability 0x09: Vendor Specific > 0:20:0: Intel 100 Series xHCI > 0x0000: Vendor ID: 8086, Product ID: 9d2f > 0x0004: Command: 0006, Status: 0290 > 0x0008: Class: 0c Serial Bus, Subclass: 03 USB, > Interface: 30, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000000072300000/0x00010000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 386a > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0070: Capability 0x01: Power Management > State: D0 > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0:20:2: Intel 100 Series Thermal > 0x0000: Vendor ID: 8086, Product ID: 9d31 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000002ffb022000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 385a > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 03 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > State: D0 > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0:21:0: Intel 100 Series I2C > 0x0000: Vendor ID: 8086, Product ID: 9d60 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000002ffb021000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 385f > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0080: Capability 0x01: Power Management > State: D0 > 0x0090: Capability 0x09: Vendor Specific > 0:21:1: Intel 100 Series I2C > 0x0000: Vendor ID: 8086, Product ID: 9d61 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000002ffb020000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3857 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 02 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0080: Capability 0x01: Power Management > State: D0 > 0x0090: Capability 0x09: Vendor Specific > 0:21:3: Intel 100 Series I2C > 0x0000: Vendor ID: 8086, Product ID: 9d63 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000002ffb01f000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3809 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 04 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0080: Capability 0x01: Power Management > State: D0 > 0x0090: Capability 0x09: Vendor Specific > 0:22:0: Intel 100 Series MEI > 0x0000: Vendor ID: 8086, Product ID: 9d3a > 0x0004: Command: 0004, Status: 0010 > 0x0008: Class: 07 Communications, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000002ffb01e000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3868 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > State: D0 > 0x008c: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0:25:0: Intel 100 Series UART > 0x0000: Vendor ID: 8086, Product ID: 9d66 > 0x0004: Command: 0000, Status: 0010 > 0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000002ffb01d000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3810 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0080: Capability 0x01: Power Management > State: D3 > 0x0090: Capability 0x09: Vendor Specific > 0:28:0: Intel 100 Series PCIE > 0x0000: Vendor ID: 8086, Product ID: 9d10 > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: f1 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 106, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 4400, Memory Limit: 7200 > 0x0024: Prefetch Memory Base: b001, Prefetch Memory Limit: f9f1 > 0x0028: Prefetch Memory Base Upper 32 Bits: 0000002f > 0x002c: Prefetch Memory Limit Upper 32 Bits: 0000002f > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 128 / 128 bytes > Max Read Request Size: 128 bytes > Link Speed: 2.5 / 8.0 GT/s > Link Width: x0 / x4 > 0x0100: Enhanced Capability 0x00: Unknown > 0x0140: Enhanced Capability 0x0d: Access Control Services > 0x0220: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:28:4: Intel 100 Series PCIE > 0x0000: Vendor ID: 8086, Product ID: 9d14 > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: f1 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 107, Subordinate Bus: 107, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 7220, Memory Limit: 7220 > 0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 128 / 256 bytes > Max Read Request Size: 128 bytes > Link Speed: 2.5 / 8.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0140: Enhanced Capability 0x0d: Access Control Services > 0x0200: Enhanced Capability 0x1e: L1 PM > 0x0220: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:29:0: Intel 100 Series PCIE > 0x0000: Vendor ID: 8086, Product ID: 9d18 > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: f1 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 108, Subordinate Bus: 108, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 7210, Memory Limit: 7210 > 0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 128 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x4 / x4 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0140: Enhanced Capability 0x0d: Access Control Services > 0x0200: Enhanced Capability 0x1e: L1 PM > 0x0220: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:31:0: Intel 200 Series LPC > 0x0000: Vendor ID: 8086, Product ID: 9d4e > 0x0004: Command: 0407, Status: 0000 > 0x0008: Class: 06 Bridge, Subclass: 01 ISA, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3816 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0:31:2: Intel 100 Series PMC > 0x0000: Vendor ID: 8086, Product ID: 9d21 > 0x0004: Command: 0006, Status: 0000 > 0x0008: Class: 05 Memory, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0x72310000/0x00004000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 386c > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0:31:3: Intel 200 Series HD Audio > 0x0000: Vendor ID: 8086, Product ID: 9d71 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 04 Multimedia, Subclass: 01 Audio, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 20, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000002ffb018000/0x00004000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR mem 64bit addr: 0x0000002ffb000000/0x00010000 > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3831 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > State: D0 > 0x0060: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0:31:4: Intel 100 Series SMBus > 0x0000: Vendor ID: 8086, Product ID: 9d23 > 0x0004: Command: 0003, Status: 0280 > 0x0008: Class: 0c Serial Bus, Subclass: 05 SMBus, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000002ffb01c000/0x00000100 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR io addr: 0x00003040/0x0020 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 17aa Product ID: 3867 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 107:0:0: Intel AC 8260 > 0x0000: Vendor ID: 8086, Product ID: 24f3 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 02 Network, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 3a > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000000072200000/0x00002000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 0010 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x00c8: Capability 0x01: Power Management > State: D0 > 0x00d0: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 128 / 128 bytes > Max Read Request Size: 128 bytes > Link Speed: 2.5 / 2.5 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0140: Enhanced Capability 0x03: Device Serial Number > Serial Number: b88a60ffff762942 > 0x014c: Enhanced Capability 0x18: Latency Tolerance Reporting > 0x0154: Enhanced Capability 0x1e: L1 PM > 108:0:0: Samsung SM981/PM981 NVMe > 0x0000: Vendor ID: 144d, Product ID: a808 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 01 Mass Storage, Subclass: 08 NVM, > Interface: 02, Revision: 00 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000000072100000/0x00004000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 144d Product ID: a801 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > State: D0 > 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x0070: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 512 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x4 / x4 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0148: Enhanced Capability 0x03: Device Serial Number > Serial Number: 0000000000000000 > 0x0158: Enhanced Capability 0x04: Power Budgeting > 0x0168: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0188: Enhanced Capability 0x18: Latency Tolerance Reporting > 0x0190: Enhanced Capability 0x1e: L1 PM > 0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X) > Enabled: yes; table size 33 (BAR 0:12288) > > -- disklabel > > # /dev/rsd0c: > type: SCSI > disk: SCSI disk > label: Samsung SSD 970 > duid: xxxxxxxxxxxxxxxx > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 255 > sectors/cylinder: 16065 > cylinders: 60801 > total sectors: 976773168 > boundstart: 1024 > boundend: 976773135 > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > a: 4208000 1024 4.2BSD 2048 16384 12960 # / > b: 27278376 4209024 swap # none > c: 976773168 0 unused > d: 27278336 31487424 4.2BSD 2048 16384 12960 # /tmp > e: 27278368 58765760 4.2BSD 2048 16384 12960 # /var > f: 41945696 86044128 4.2BSD 2048 16384 12960 # /usr > g: 62926624 127989824 4.2BSD 2048 16384 12960 # > /usr/local > h: 419441024 190916480 4.2BSD 4096 32768 26062 # /home > i: 960 64 MSDOS > > > -- > >> David Rinehart > >>
