Greetings. I'm testing a new AliExpress (unbranded) mini PC based on Intel Jasper Lake on the latest -current, running headless over serial console. All devices of note seem to be detected and run well (AHCI, NVME, I226-V ethernet), but one CPU is pegged at 100%. The only notable process doing anything on an otherwise idle system is `acpi0`, along with a high interrupt rate. Outputs of top, vmstat (x2), dmesg, and pcidump follow, and acpidump is attached.
Please let me know if there's anything else I can provide. Thanks.
Brian
# top -bIS
load averages: 0.93, 0.84, 0.48 rtest.int.rcesoftware.com 19:21:17
91 processes: 87 idle, 4 on processor up 0 days 00:09:44
CPU0 states: 0.0% user, 0.0% nice, 15.5% sys, 0.6% spin, 76.3% intr, 7.6%
idle
CPU1 states: 0.3% user, 0.0% nice, 0.3% sys, 0.5% spin, 0.0% intr, 98.9%
idle
CPU2 states: 0.2% user, 0.0% nice, 0.4% sys, 0.6% spin, 0.0% intr, 98.8%
idle
CPU3 states: 0.1% user, 0.0% nice, 0.2% sys, 0.3% spin, 0.0% intr, 99.4%
idle
Memory: Real: 121M/459M act/tot Free: 7308M Cache: 231M Swap: 0K/0K
PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
34802 root 34 0 0K 2096K onproc/0 - 1:33 15.58% acpi0
# vmstat -c 5
procs memory page disks traps cpu
r s avm fre flt re pi po fr sr sd0 sd1 int sys cs us sy id
2 87 121M 7308M 518 0 0 0 0 0 0 0 9217 595 18596 0 24 76
0 87 121M 7308M 11 0 0 0 0 0 0 0 9251 30 18533 0 22 78
0 87 121M 7308M 7 0 0 0 0 0 0 0 9320 19 18666 0 24 76
0 87 121M 7308M 7 0 0 0 0 0 0 0 9318 19 18666 0 22 78
0 87 121M 7308M 7 0 0 0 0 0 0 0 9325 19 18676 0 25 75
# vmstat -i
interrupt total rate
irq144/com0 557 0
irq96/acpi0 5659949 9173
irq145/inteldrm0 178 0
irq97/xhci0 20227 32
irq98/ahci0 14 0
irq100/nvme0 13 0
irq114/igc0:0 3212 5
irq115/igc0:1 349 0
irq116/igc0:2 360 0
irq117/igc0:3 1329 2
irq118/igc0 2 0
irq0/clock 492346 797
irq0/ipi 8974 14
Total 6187510 10028
dmesg:
OpenBSD 7.2-current (GENERIC.MP) #1031: Fri Feb 10 21:22:48 MST 2023
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8410243072 (8020MB)
avail mem = 8135966720 (7759MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x78d77000 (116 entries)
bios0: vendor Techvision, LLC. version "5.19" date 11/08/2022
bios0: Techvision TVI7309X
efi0 at bios0: UEFI 2.7
efi0: American Megatrends rev 0x50013
acpi0 at bios0: ACPI 6.2
acpi0: sleep states S0 S3 S5
acpi0: tables DSDT FACP MCFG FIDT SSDT SSDT SSDT HPET APIC PRAM SSDT SSDT NHLT
LPIT SSDT SSDT DBGP DBG2 SSDT DMAR SSDT TPM2 WSMT FPDT
acpi0: wakeup devices PEGP(S3) PEGP(S3) PEGP(S3) PEGP(S3) SIO1(S3) RP01(S3)
PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3) PXSX(S3) RP05(S3)
PXSX(S3) RP06(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.96 MHz, 06-9c-00
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.95 MHz, 06-9c-00
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.95 MHz, 06-9c-00
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.95 MHz, 06-9c-00
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 2 (RP05)
acpiprt6 at acpi0: bus 3 (RP06)
acpiprt7 at acpi0: bus 4 (RP07)
acpiprt8 at acpi0: bus 5 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
"ACPI000E" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev 0x0
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpipwrres0 at acpi0: WRST
acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpipwrres1 at acpi0: FN00, resource for FAN0
acpipwrres2 at acpi0: FN01, resource for FAN1
acpipwrres3 at acpi0: FN02, resource for FAN2
acpipwrres4 at acpi0: FN03, resource for FAN3
acpipwrres5 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpipwrres6 at acpi0: PIN_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
acpivout1 at acpivideo0: DD2F
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 1101, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Jasper Lake Host" rev 0x00
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, JASPERLAKE, gen 11
"Intel Jasper Lake DPTF" rev 0x00 at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Jasper Lake xHCI" rev 0x01: msi, xHCI
1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Jasper Lake Shared SRAM" rev 0x01 at pci0 dev 20 function 2 not
configured
"Intel Jasper Lake HECI" rev 0x01 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel Jasper Lake AHCI" rev 0x01: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0> naa.5002538e19a4df9d
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel Jasper Lake PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 "Samsung PM991 NVMe" rev 0x00: msix, NVMe 1.4
nvme0: Samsung SSD 980 1TB, firmware 3B4QFXO7, serial S64ANL0TB16610W
scsibus2 at nvme0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, Samsung SSD 980, 3B4Q>
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ppb1 at pci0 dev 28 function 4 "Intel Jasper Lake PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
igc0 at pci2 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
60:be:b4:08:d1:54
ppb2 at pci0 dev 28 function 5 "Intel Jasper Lake PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
igc1 at pci3 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
60:be:b4:08:d1:55
ppb3 at pci0 dev 28 function 6 "Intel Jasper Lake PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
igc2 at pci4 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
60:be:b4:08:d1:56
ppb4 at pci0 dev 28 function 7 "Intel Jasper Lake PCIE" rev 0x01: msi
pci5 at ppb4 bus 5
igc3 at pci5 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
60:be:b4:08:d1:57
pcib0 at pci0 dev 31 function 0 "Intel Jasper Lake eSPI" rev 0x01
azalia0 at pci0 dev 31 function 3 "Intel Jasper Lake HD Audio" rev 0x01: msi
azalia0: no supported codecs
ichiic0 at pci0 dev 31 function 4 "Intel Jasper Lake SMBus" rev 0x01: apic 2
int 16
iic0 at ichiic0
"Intel Jasper Lake SPI" rev 0x01 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
umass0 at uhub0 port 3 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev
2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable
serial.0781558b092121181446
sd2: 59840MB, 512 bytes/sector, 122552320 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd2a (a3d4440d3ab20346.a) swap on sd2b dump on sd2b
drm:pid76358:dmc_load_work_fn *NOTICE* [drm] Failed to load DMC firmware
i915/icl_dmc_ver1_09.bin. Disabling runtime power management.
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
pcidump -v:
Domain /dev/pci0:
0:0:0: Intel Jasper Lake Host
0x0000: Vendor ID: 8086, Product ID: 4e12
0x0004: Command: 0006, Status: 2090
0x0008: Class: 06 Bridge, Subclass: 00 Host,
Interface: 00, Revision: 00
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:2:0: Intel UHD Graphics
0x0000: Vendor ID: 8086, Product ID: 4e61
0x0004: Command: 0007, Status: 0010
0x0008: Class: 03 Display, Subclass: 00 VGA,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x0000006000000000/0x01000000
0x0018: BAR mem prefetchable 64bit addr: 0x0000004000000000/0x10000000
0x0020: BAR io addr: 0x00003000/0x0040
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 2212
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x09: Vendor Specific
0x0070: Capability 0x10: PCI Express
Max Payload Size: 128 / 128 bytes
Max Read Request Size: 128 bytes
0x0100: Enhanced Capability 0x1b: Process Address Space ID
0x0200: Enhanced Capability 0x0f: Address Translation Services
0x0300: Enhanced Capability 0x13: Page Request Interface
0x00ac: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x00d0: Capability 0x01: Power Management
State: D0
0:4:0: Intel Jasper Lake DPTF
0x0000: Vendor ID: 8086, Product ID: 4e03
0x0004: Command: 0000, Status: 0090
0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 00
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000006001110000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x00d0: Capability 0x01: Power Management
State: D0
0x00e0: Capability 0x09: Vendor Specific
0:20:0: Intel Jasper Lake xHCI
0x0000: Vendor ID: 8086, Product ID: 4ded
0x0004: Command: 0006, Status: 0290
0x0008: Class: 0c Serial Bus, Subclass: 03 USB,
Interface: 30, Revision: 01
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000006001100000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
State: D0
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x09: Vendor Specific
0:20:2: Intel Jasper Lake Shared SRAM
0x0000: Vendor ID: 8086, Product ID: 4def
0x0004: Command: 0000, Status: 0010
0x0008: Class: 05 Memory, Subclass: 00 RAM,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x0000006001124000/0x00002000
0x0018: BAR mem 64bit addr: 0x0000006001128000/0x00001000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: ff Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x01: Power Management
State: D0
0:22:0: Intel Jasper Lake HECI
0x0000: Vendor ID: 8086, Product ID: 4de0
0x0004: Command: 0000, Status: 0010
0x0008: Class: 07 Communications, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000006001127000/0x00001000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x008c: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x00a4: Capability 0x09: Vendor Specific
0:23:0: Intel Jasper Lake AHCI
0x0000: Vendor ID: 8086, Product ID: 4dd3
0x0004: Command: 0007, Status: 02b0
0x0008: Class: 01 Mass Storage, Subclass: 06 SATA,
Interface: 01, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0x80500000/0x00002000
0x0014: BAR mem 32bit addr: 0x80503000/0x00000100
0x0018: BAR io addr: 0x00003090/0x0008
0x001c: BAR io addr: 0x00003080/0x0004
0x0020: BAR io addr: 0x00003060/0x0020
0x0024: BAR mem 32bit addr: 0x80502000/0x00000800
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0070: Capability 0x01: Power Management
State: D0
0x00a8: Capability 0x12: SATA
0:28:0: Intel Jasper Lake PCIE
0x0000: Vendor ID: 8086, Product ID: 4db8
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 1,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: 8040, Memory Limit: 8040
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0010
0x0040: Capability 0x10: PCI Express
Max Payload Size: 256 / 256 bytes
Max Read Request Size: 128 bytes
Link Speed: 5.0 / 8.0 GT/s
Link Width: x2 / x2
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0220: Enhanced Capability 0x0d: Access Control Services
0x0150: Enhanced Capability 0x1f: Precision Time Measurement
0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability
0x0a00: Enhanced Capability 0x1d: Downstream Port Containment
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:4: Intel Jasper Lake PCIE
0x0000: Vendor ID: 8086, Product ID: 4dbc
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 2, Subordinate Bus: 2,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: 8020, Memory Limit: 8030
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0010
0x0040: Capability 0x10: PCI Express
Max Payload Size: 256 / 256 bytes
Max Read Request Size: 128 bytes
Link Speed: 5.0 / 8.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0220: Enhanced Capability 0x0d: Access Control Services
0x0150: Enhanced Capability 0x1f: Precision Time Measurement
0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability
0x0a00: Enhanced Capability 0x1d: Downstream Port Containment
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:5: Intel Jasper Lake PCIE
0x0000: Vendor ID: 8086, Product ID: 4dbd
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 3, Subordinate Bus: 3,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: 8000, Memory Limit: 8010
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 02, Line: ff, Bridge Control: 0010
0x0040: Capability 0x10: PCI Express
Max Payload Size: 256 / 256 bytes
Max Read Request Size: 128 bytes
Link Speed: 5.0 / 8.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0220: Enhanced Capability 0x0d: Access Control Services
0x0150: Enhanced Capability 0x1f: Precision Time Measurement
0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability
0x0a00: Enhanced Capability 0x1d: Downstream Port Containment
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:6: Intel Jasper Lake PCIE
0x0000: Vendor ID: 8086, Product ID: 4dbe
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 4, Subordinate Bus: 4,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: 7fe0, Memory Limit: 7ff0
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 03, Line: ff, Bridge Control: 0010
0x0040: Capability 0x10: PCI Express
Max Payload Size: 256 / 256 bytes
Max Read Request Size: 128 bytes
Link Speed: 5.0 / 8.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0220: Enhanced Capability 0x0d: Access Control Services
0x0150: Enhanced Capability 0x1f: Precision Time Measurement
0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability
0x0a00: Enhanced Capability 0x1d: Downstream Port Containment
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:7: Intel Jasper Lake PCIE
0x0000: Vendor ID: 8086, Product ID: 4dbf
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 5, Subordinate Bus: 5,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: 7fc0, Memory Limit: 7fd0
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 04, Line: ff, Bridge Control: 0010
0x0040: Capability 0x10: PCI Express
Max Payload Size: 256 / 256 bytes
Max Read Request Size: 128 bytes
Link Speed: 5.0 / 8.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0220: Enhanced Capability 0x0d: Access Control Services
0x0150: Enhanced Capability 0x1f: Precision Time Measurement
0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability
0x0a00: Enhanced Capability 0x1d: Downstream Port Containment
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:31:0: Intel Jasper Lake eSPI
0x0000: Vendor ID: 8086, Product ID: 4d87
0x0004: Command: 0407, Status: 0000
0x0008: Class: 06 Bridge, Subclass: 01 ISA,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:31:3: Intel Jasper Lake HD Audio
0x0000: Vendor ID: 8086, Product ID: 4dc8
0x0004: Command: 0006, Status: 0010
0x0008: Class: 04 Multimedia, Subclass: 03 HD Audio,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 20,
Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x0000006001120000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR mem 64bit addr: 0x0000006001000000/0x00100000
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0080: Capability 0x09: Vendor Specific
0x0060: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0:31:4: Intel Jasper Lake SMBus
0x0000: Vendor ID: 8086, Product ID: 4da3
0x0004: Command: 0003, Status: 0280
0x0008: Class: 0c Serial Bus, Subclass: 05 SMBus,
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000006001126000/0x00000100
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000efa0/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0:31:5: Intel Jasper Lake SPI
0x0000: Vendor ID: 8086, Product ID: 4da4
0x0004: Command: 0402, Status: 0000
0x0008: Class: 0c Serial Bus, Subclass: 80 (unknown),
Interface: 00, Revision: 01
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0x00000000/0x00001000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 7270
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
1:0:0: Samsung PM991 NVMe
0x0000: Vendor ID: 144d, Product ID: a809
0x0004: Command: 0006, Status: 0010
0x0008: Class: 01 Mass Storage, Subclass: 08 NVM,
Interface: 02, Revision: 00
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x0000000080400000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 144d Product ID: a801
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x10: PCI Express
Max Payload Size: 256 / 256 bytes
Max Read Request Size: 512 bytes
Link Speed: 5.0 / 8.0 GT/s
Link Width: x2 / x4
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0148: Enhanced Capability 0x03: Device Serial Number
Serial Number: 0000000000000000
0x0158: Enhanced Capability 0x04: Power Budgeting
0x0168: Enhanced Capability 0x19: Secondary PCIe Capability
0x0188: Enhanced Capability 0x18: Latency Tolerance Reporting
0x0190: Enhanced Capability 0x1e: L1 PM
0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: yes; table size 13 (BAR 0:12288)
2:0:0: Intel I226-V
0x0000: Vendor ID: 8086, Product ID: 125c
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 04
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR mem 32bit addr: 0x80200000/0x00100000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR mem 32bit addr: 0x80300000/0x00004000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: yes; table size 5 (BAR 3:0)
0x00a0: Capability 0x10: PCI Express
Max Payload Size: 256 / 512 bytes
Max Read Request Size: 512 bytes
Link Speed: 5.0 / 5.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x03: Device Serial Number
Serial Number: 60beb4ffff08d154
0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting
0x01f0: Enhanced Capability 0x1f: Precision Time Measurement
0x01e0: Enhanced Capability 0x1e: L1 PM
3:0:0: Intel I226-V
0x0000: Vendor ID: 8086, Product ID: 125c
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 04
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR mem 32bit addr: 0x80000000/0x00100000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR mem 32bit addr: 0x80100000/0x00004000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: yes; table size 5 (BAR 3:0)
0x00a0: Capability 0x10: PCI Express
Max Payload Size: 256 / 512 bytes
Max Read Request Size: 512 bytes
Link Speed: 5.0 / 5.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x03: Device Serial Number
Serial Number: 60beb4ffff08d155
0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting
0x01f0: Enhanced Capability 0x1f: Precision Time Measurement
0x01e0: Enhanced Capability 0x1e: L1 PM
4:0:0: Intel I226-V
0x0000: Vendor ID: 8086, Product ID: 125c
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 04
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR mem 32bit addr: 0x7fe00000/0x00100000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR mem 32bit addr: 0x7ff00000/0x00004000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: yes; table size 5 (BAR 3:0)
0x00a0: Capability 0x10: PCI Express
Max Payload Size: 256 / 512 bytes
Max Read Request Size: 512 bytes
Link Speed: 5.0 / 5.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x03: Device Serial Number
Serial Number: 60beb4ffff08d156
0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting
0x01f0: Enhanced Capability 0x1f: Precision Time Measurement
0x01e0: Enhanced Capability 0x1e: L1 PM
5:0:0: Intel I226-V
0x0000: Vendor ID: 8086, Product ID: 125c
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 04
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 10
0x0010: BAR mem 32bit addr: 0x7fc00000/0x00100000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR mem 32bit addr: 0x7fd00000/0x00004000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0
0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: yes; table size 5 (BAR 3:0)
0x00a0: Capability 0x10: PCI Express
Max Payload Size: 256 / 512 bytes
Max Read Request Size: 512 bytes
Link Speed: 5.0 / 5.0 GT/s
Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x03: Device Serial Number
Serial Number: 60beb4ffff08d157
0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting
0x01f0: Enhanced Capability 0x1f: Precision Time Measurement
0x01e0: Enhanced Capability 0x1e: L1 PM
acpi.tgz
Description: GNU Zip compressed data
