FWIW, it now works here, too :^)
Thanks for a prompt fix, Miod!
Cheers,
Raf
On Tue, Apr 18, 2023 at 08:40:14PM BST, Paul de Weerd wrote:
> On Tue, Apr 18, 2023 at 03:52:02PM +0000, Miod Vallat wrote:
> | > After updating my RPi4 to a newer snap, it lost its humidity sensor.
> | >
> | > dmesg from before and after the update both detect this:
> | >
> | > uhidev1 at uhub1 port 2 configuration 1 interface 1 "RDing
> TEMPERHUM1V1.2" rev 2.00/0.01 addr 3
> | > uhidev1: iclass 3/1
> | > ugold0 at uhidev1
> | > ugold0: 2 sensors type si7006 (temperature and humidity)
> | >
> | > But the new install only has the temperature sensor available:
> | >
> | > [weerd@raspberry] $ sysctl hw.sensors.ugold0
> | > hw.sensors.ugold0.temp0=22.32 degC (inner)
> |
> | Sorry about that. Can you try the following diff and report if it brings
> | the humidity sensor back?
>
> It does! Thanks :)
>
> hw.sensors.ugold0.temp0=22.58 degC (inner)
> hw.sensors.ugold0.humidity0=40.69% (RH)
>
> Cheers,
>
> Paul
>
> | Miod
> |
> | Index: ugold.c
> | ===================================================================
> | RCS file: /OpenBSD/src/sys/dev/usb/ugold.c,v
> | retrieving revision 1.22
> | diff -u -p -r1.22 ugold.c
> | --- ugold.c 2 Apr 2023 17:03:14 -0000 1.22
> | +++ ugold.c 18 Apr 2023 15:51:13 -0000
> | @@ -432,7 +432,7 @@ ugold_si700x_intr(struct uhidev *addr, v
> | temp = ugold_si700x_temp(sc->sc_type, buf[2], buf[3]);
> | sc->sc_sensor[UGOLD_INNER].value = (temp * 1000) + 273150000;
> | sc->sc_sensor[UGOLD_INNER].flags &= ~SENSOR_FINVALID;
> | - if (sc->sc_type != UGOLD_TYPE_GOLD && buf[1] >= 6) {
> | + if (sc->sc_type != UGOLD_TYPE_GOLD) {
> | rhum = ugold_si700x_rhum(sc->sc_type, buf[4], buf[5],
> temp);
> | sc->sc_sensor[UGOLD_HUM].value = rhum;
> | sc->sc_sensor[UGOLD_HUM].flags &= ~SENSOR_FINVALID;
>
> --
> >++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
> +++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
> http://www.weirdnet.nl/
>
