Hello,
I'm trying and so far failing to migrate my Pinebook Pro from armbian to
OpenBSD.
Following
https://ftp.openbsd.org/pub/OpenBSD/snapshots/arm64/INSTALL.arm64 I
created a SD card and booted from it without any problem.
The below I tested with 6.9, 7.0, 7.3 and 7.4
With all of the above releases I can boot but they all stop at "ohci0 at
mainbus0" as you can see at the end of the picocom output below.
Would be thankful for any hint or pointer.
Many thanks,
Andi
#############
U-Boot TPL 2022.04-armbian (Apr 04 2023 - 04:33:44)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2022.04-armbian (Apr 04 2023 - 04:33:44 +0000)
Trying to boot from SPI
Trying to boot from MMC1
NOTICE: BL31: v2.6(release):armbian
NOTICE: BL31: Built : 04:33:08, Apr 4 2023
INFO: GICv3 with legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 287
INFO: plat_rockchip_pmu_init(1624): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2022.04-armbian (Apr 04 2023 - 04:33:44 +0000)
SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 Pinebook Pro
DRAM: 3.9 GiB
PMIC: RK808
Core: 311 devices, 31 uclasses, devicetree: separate
MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page
size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Pine64 Pinebook Pro
Net: No ethernet found.
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus usb@fe800000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fe900000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 4 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus usb@fe800000 for devices... 1 USB Device(s) found
scanning bus usb@fe900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot: 0
Device 0: Vendor: General Rev: 5.00 Prod: UDisk
Type: Removable Hard Disk
Capacity: 1900.0 MB = 1.8 GB (3891200 x 512)
... is now current device
Scanning usb 0:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select! : -110
Scanning disk m...@fe310000.blk...
Disk m...@fe310000.blk not ready
Scanning disk m...@fe320000.blk...
Scanning disk m...@fe330000.blk...
Scanning disk usb_mass_storage.lun0...
Found 7 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
64962 bytes read in 12 ms (5.2 MiB/s)
BootOrder not defined
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
219050 bytes read in 30 ms (7 MiB/s)
Booting /efi\boot\bootaa64.efi
disks: sd0* sd1 sd2
OpenBSD/arm64 BOOTAA64 1.18
boot> help
commands: # boot echo env help hexdump ls machine reboot set stty time
machine: acpi dtb exit poweroff
boot> boot
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2865844+1093432+12711584+631216
[233251+91+666048+260915]=0x13d4fd0
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 7.4-current (RAMDISK) #2133: Thu Oct 12 03:36:59 MDT 2023
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 4088946688 (3899MB)
avail mem = 3883462656 (3703MB)
random: good seed from bootblocks
mainbus0 at root: Pine64 Pinebook Pro
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.9
efi0: Das U-Boot rev 0x20220400
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2022.04-armbian" date 04/01/2022
smbios0: Unknown Unknown Product
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1
D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6:
"interrupt-controller"
agintcmsi0 at agintc0
syscon0 at mainbus0: "qos"
syscon1 at mainbus0: "qos"
syscon2 at mainbus0: "qos"
syscon3 at mainbus0: "qos"
syscon4 at mainbus0: "qos"
syscon5 at mainbus0: "qos"
syscon6 at mainbus0: "qos"
syscon7 at mainbus0: "qos"
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "power-management"
"power-controller" at syscon25 not configured
syscon26 at mainbus0: "syscon"
"io-domains" at syscon26 not configured
rkclock0 at mainbus0
rkclock1 at mainbus0
CRU_CLKGATE_CON6: 0x00000060
CRU_CLKGATE_CON13: 0x000000f0
rkclock_set_frequency(rkclock1, 237, 400000000)
syscon27 at mainbus0: "syscon"
"io-domains" at syscon27 not configured
"usb2phy" at syscon27 not configured
"usb2phy" at syscon27 not configured
rkemmcphy0 at syscon27
"pcie-phy" at syscon27 not configured
rktcphy0 at mainbus0
rktcphy1 at mainbus0
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
"display-subsystem" at mainbus0 not configured
"pmu_a53" at mainbus0 not configured
"pmu_a72" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
rkpcie0 at mainbus0
rkpcie0: link training timeout
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 4-bit, sd high-speed, mmc high-speed, dma
sdhc0 at mainbus0
sdhc0: SDHC 3.00, 200 MHz base clock
sdmmc2 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
ehci0 at mainbus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev
2.00/1.00 addr 1
ohci0 at mainbus0
#############
