Confirming that dwqe0 and dwqe1 onboard Ethernet do work on the Fitlet 3 when bios was upgraded from FTL.PRD.BN.00.03 to FTL.PRD.00.06. No watchdog timeouts are seen so far.
The prior bug report I submitted was with the older bios and contained the following errors: Both interfaces behaved the same not differently for the watchdog timeouts. Also what was listed as output of “pcidev” was of course “pcidump” and was presumptuous to not include full pcidump. Regards, Ted > On Nov 16, 2023, at 4:23 PM, Ted Ri <t26034...@gmail.com> wrote: > > Correction: bootpc messages are seen on on both dwqe0 and dwqe1 interfaces > with tcpdump so no difference between the two. > >> On Nov 15, 2023, at 11:53 PM, Ted Ri <t26034...@gmail.com> wrote: >> >> Onboard ethernet is now recognized and displays nonblinking orange >> status LED. No address is acquired. Nothing shows on tcpdump -i >> dwqe0 when /bin/sh -x /etc/netstart dwqe0 is executed. However >> tcpdump -i dwqe1 yields multiple bootp messages with netstart also >> failing to lead to acquisition of an address: >> 14:54:16.155752 0.0.0.0.bootpc > 255.255.255.255.bootps: >> xid:0x8785dc78 [|bootp] [tos 0x10] >> 14:54.17.985269 0.0.0.0 bootpc > 255.255.255.255.bootps: >> xid:0x8758dc78 [|bootp] [tos 0x10] >> >> Note that iwx0 wireless interface is able to acquire address without >> difficulty and functions normally. >> ... >> When an address on the subnet is assigned to dwqe0 or dwqe1 manually >> with ifconfig, ping to assigned address (interface itself) works but >> not to gateway or anything else on the same subnet. Ifconfig does show >> both interfaces to be up. This occurs with different ethernet cables >> and different devices at the other end (WAP bridge and directly into >> the firewall.) Hostname.dwqe[0,1] files have inet autoconf but I also >> tried with all of the supported mediopt permutations without a change >> in behavior. >> >> Following is pcidev; pcidev 0:29:1; pcidev 0:29:2; dmesg >> >> Domain /dev/pci0: >> 0:0:0: Intel Elkhart Lake Host >> 0:2:0: Intel UHD Graphics >> 0:8:0: Intel Elkhart Lake GNA >> 0:20:0: Intel Elkhart Lake xHCI >> 0:20:2: Intel Elkhart Lake SRAM >> 0:21:0: Intel Elkhart Lake I2C >> 0:21:2: Intel Elkhart Lake I2C >> 0:21:3: Intel Elkhart Lake I2C >> 0:22:0: Intel Elkhart Lake HECI >> 0:23:0: Intel Elkhart Lake AHCI >> 0:25:0: Intel Elkhart Lake I2C >> 0:25:2: Intel Elkhart Lake UART >> 0:28:0: Intel Elkhart Lake PCIE >> 0:28:4: Intel Elkhart Lake PCIE >> 0:28:6: Intel Elkhart Lake PCIE >> 0:29:0: Intel Elkhart Lake LH2OSE >> 0:29:1: Intel Elkhart Lake Ethernet >> 0:29:2: Intel Elkhart Lake Ethernet >> 0:30:0: Intel Elkhart Lake UART >> 0:30:1: Intel Elkhart Lake UART >> 0:31:0: Intel Elkhart Lake eSPI >> 0:31:3: Intel Elkhart Lake HD Audio >> 0:31:4: Intel Elkhart Lake SMBus >> 0:31:5: Intel Elkhart Lake SPI >> 1:0:0: unknown unknown >> 3:0:0: Intel Wi-Fi 6 AX210 >> >> 0:29:1: Intel Elkhart Lake Ethernet >> 0x0000: Vendor ID: 8086, Product ID: 4ba1 >> 0x0004: Command: 0006, Status: 0010 >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet, >> Interface: 18, Revision: 11 >> 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, >> Cache Line Size: 00 >> 0x0010: BAR mem 64bit addr: 0x0000006001340000/0x00040000 >> 0x0018: BAR empty (00000000) >> 0x001c: BAR empty (00000000) >> 0x0020: BAR empty (00000000) >> 0x0024: BAR empty (00000000) >> 0x0028: Cardbus CIS: 00000000 >> 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 >> 0x0030: Expansion ROM Base Address: 00000000 >> 0x0038: 00000000 >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 >> 0x0080: Capability 0x01: Power Management >> State: D0 >> 0x0090: Capability 0x09: Vendor Specific >> 0x00d0: Capability 0x05: Message Signalled Interrupts (MSI) >> Enabled: yes >> >> 0:29:2: Intel Elkhart Lake Ethernet >> 0x0000: Vendor ID: 8086, Product ID: 4bb1 >> 0x0004: Command: 0006, Status: 0010 >> 0x0008: Class: 02 Network, Subclass: 00 Ethernet, >> Interface: 19, Revision: 11 >> 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, >> Cache Line Size: 00 >> 0x0010: BAR mem 64bit addr: 0x0000006001300000/0x00040000 >> 0x0018: BAR empty (00000000) >> 0x001c: BAR empty (00000000) >> 0x0020: BAR empty (00000000) >> 0x0024: BAR empty (00000000) >> 0x0028: Cardbus CIS: 00000000 >> 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 >> 0x0030: Expansion ROM Base Address: 00000000 >> 0x0038: 00000000 >> 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 >> 0x0080: Capability 0x01: Power Management >> State: D0 >> 0x0090: Capability 0x09: Vendor Specific >> 0x00d0: Capability 0x05: Message Signalled Interrupts (MSI) >> Enabled: yes >> >> OpenBSD 7.4-current (GENERIC.MP) #1443: Tue Nov 14 19:38:25 MST 2023 >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 8378597376 (7990MB) >> avail mem = 8105029632 (7729MB) >> random: good seed from bootblocks >> mpath0 at root >> scsibus0 at mpath0: 256 targets >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x76a31000 (81 entries) >> bios0: vendor American Megatrends International, LLC. version "5.19" >> date 01/24/2023 >> bios0: Default string Default string >> efi0 at bios0: UEFI 2.7 >> efi0: American Megatrends rev 0x50013 >> acpi0 at bios0: ACPI 6.2 >> acpi0: sleep states S0 S3 S4 S5 >> acpi0: tables DSDT FACP MCFG SSDT SSDT SSDT FIDT OEM1 HPET APIC PRAM >> RSCI SSDT SSDT SSDT NHLT SSDT SSDT PSDS LPIT SSDT DMAR SSDT TPM2 WSMT >> FPDT >> acpi0: wakeup devices RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) >> PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) >> RP07(S4) PXSX(S4) XHCI(S3) XDCI(S4) [...] >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimcfg0 at acpi0 >> acpimcfg0: addr 0xc0000000, bus 0-255 >> acpihpet0 at acpi0: 19200000 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.12 MHz, 06-96-01, patch >> 00000017 >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >> 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache >> cpu0: smt 0, core 0, package 0 >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges >> cpu0: apic clock running at 38MHz >> cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE >> cpu1 at mainbus0: apid 2 (application processor) >> cpu1: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.11 MHz, 06-96-01, patch >> 00000017 >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >> cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >> 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache >> cpu1: smt 0, core 1, package 0 >> cpu2 at mainbus0: apid 4 (application processor) >> cpu2: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.11 MHz, 06-96-01, patch >> 00000017 >> cpu2: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >> cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >> 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache >> cpu2: smt 0, core 2, package 0 >> cpu3 at mainbus0: apid 6 (application processor) >> cpu3: Intel(R) Celeron(R) J6413 @ 1.80GHz, 1796.11 MHz, 06-96-01, patch >> 00000017 >> cpu3: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,WAITPKG,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,XSAVEOPT,XSAVEC,XGETBV1,XSAVES >> cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB >> 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache >> cpu3: smt 0, core 3, package 0 >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins >> acpiprt0 at acpi0: bus 0 (PC00) >> acpiprt1 at acpi0: bus -1 (PEG0) >> acpiprt2 at acpi0: bus -1 (PEG1) >> acpiprt3 at acpi0: bus -1 (PEG2) >> acpiprt4 at acpi0: bus -1 (PEG3) >> acpiprt5 at acpi0: bus 1 (RP01) >> acpiprt6 at acpi0: bus -1 (RP02) >> acpiprt7 at acpi0: bus -1 (RP03) >> acpiprt8 at acpi0: bus -1 (RP04) >> acpiprt9 at acpi0: bus 2 (RP05) >> acpiprt10 at acpi0: bus -1 (RP06) >> acpiprt11 at acpi0: bus 3 (RP07) >> acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001 >> "INTC1027" at acpi0 not configured >> acpibat0 at acpi0: BAT1 not present >> acpiac0 at acpi0: AC unit online >> "ACPI000E" at acpi0 not configured >> "PNP0C14" at acpi0 not configured >> acpibtn0 at acpi0: SLPB >> acpibtn1 at acpi0: PWRB(wakeup) >> "INTC1033" at acpi0 not configured >> "INTC1033" at acpi0 not configured >> "PNP0C14" at acpi0 not configured >> "PNP0C14" at acpi0 not configured >> "INT33A1" at acpi0 not configured >> acpibtn2 at acpi0: LID0 >> tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev >> 0x0 >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> acpipwrres0 at acpi0: PXP_, resource for RP01 >> acpipwrres1 at acpi0: PXP_, resource for RP05, PXSX >> acpipwrres2 at acpi0: PXP_, resource for RP07 >> acpipwrres3 at acpi0: SPPR, resource for PRT1 >> acpipwrres4 at acpi0: WRST >> acpipwrres5 at acpi0: PAUD, resource for HDAS >> acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 >> mwait.1@0x31), C1(1000@1 mwait.1), PSS >> acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 >> mwait.1@0x31), C1(1000@1 mwait.1), PSS >> acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 >> mwait.1@0x31), C1(1000@1 mwait.1), PSS >> acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 >> mwait.1@0x31), C1(1000@1 mwait.1), PSS >> acpipwrres6 at acpi0: FN00, resource for FAN0 >> acpipwrres7 at acpi0: FN01, resource for FAN1 >> acpipwrres8 at acpi0: FN02, resource for FAN2 >> acpipwrres9 at acpi0: FN03, resource for FAN3 >> acpipwrres10 at acpi0: FN04, resource for FAN4 >> acpitz0 at acpi0: critical temperature is 119 degC >> acpipwrres11 at acpi0: PIN_ >> cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1801, 1800, 1700, 1600, >> 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz >> pci0 at mainbus0 bus 0 >> 0:31:5: mem address conflict 0xfe010000/0x1000 >> pchb0 at pci0 dev 0 function 0 "Intel Elkhart Lake Host" rev 0x01 >> inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01 >> drm0 at inteldrm0 >> inteldrm0: msi, ELKHARTLAKE, gen 11 >> "Intel Elkhart Lake GNA" rev 0x01 at pci0 dev 8 function 0 not configured >> xhci0 at pci0 dev 20 function 0 "Intel Elkhart Lake xHCI" rev 0x11: >> msi, xHCI 1.20 >> usb0 at xhci0: USB revision 3.0 >> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev >> 3.00/1.00 addr 1 >> "Intel Elkhart Lake SRAM" rev 0x11 at pci0 dev 20 function 2 not configured >> dwiic0 at pci0 dev 21 function 0 "Intel Elkhart Lake I2C" rev 0x11: >> apic 2 int 27 >> iic0 at dwiic0 >> dwiic1 at pci0 dev 21 function 2 "Intel Elkhart Lake I2C" rev 0x11: >> apic 2 int 29 >> iic1 at dwiic1 >> dwiic2 at pci0 dev 21 function 3 "Intel Elkhart Lake I2C" rev 0x11: >> apic 2 int 30 >> iic2 at dwiic2 >> "INTC1027" at iic2 addr 0x1c not configured >> "Intel Elkhart Lake HECI" rev 0x11 at pci0 dev 22 function 0 not configured >> ahci0 at pci0 dev 23 function 0 "Intel Elkhart Lake AHCI" rev 0x11: >> msi, AHCI 1.3.1 >> ahci0: PHY offline on port 0 >> ahci0: PHY offline on port 1 >> scsibus1 at ahci0: 32 targets >> dwiic3 at pci0 dev 25 function 0 "Intel Elkhart Lake I2C" rev 0x11: >> apic 2 int 31 >> iic3 at dwiic3 >> "Intel Elkhart Lake UART" rev 0x11 at pci0 dev 25 function 2 not configured >> ppb0 at pci0 dev 28 function 0 "Intel Elkhart Lake PCIE" rev 0x11 >> pci1 at ppb0 bus 1 >> nvme0 at pci1 dev 0 function 0 unknown vendor 0x1dbe product 0x5208 >> rev 0x01: msix, NVMe 1.3 >> nvme0: 60GB PCIe Drive, firmware PNGA004C, serial 122237300653 >> scsibus2 at nvme0: 2 targets, initiator 0 >> sd0 at scsibus2 targ 1 lun 0: <NVMe, 60GB PCIe Drive, PNGA> >> sd0: 57241MB, 512 bytes/sector, 117231408 sectors >> ppb1 at pci0 dev 28 function 4 "Intel Elkhart Lake PCIE" rev 0x11 >> pci2 at ppb1 bus 2 >> ppb2 at pci0 dev 28 function 6 "Intel Elkhart Lake PCIE" rev 0x11 >> pci3 at ppb2 bus 3 >> iwx0 at pci3 dev 0 function 0 "Intel Wi-Fi 6 AX210" rev 0x1a, msix >> "Intel Elkhart Lake LH2OSE" rev 0x11 at pci0 dev 29 function 0 not configured >> dwqe0 at pci0 dev 29 function 1 "Intel Elkhart Lake Ethernet" rev >> 0x11dwqe0: reset timeout >> : rev 0x52, address xx:xx:xx:xx:xx:xx >> dwqe0: reset timeout >> eephy0 at dwqe0 phy 1: 88E1512 10/100/1000 PHY, rev. 1 >> dwqe1 at pci0 dev 29 function 2 "Intel Elkhart Lake Ethernet" rev >> 0x11dwqe1: reset timeout >> : rev 0x52, address xx:xx:xx:xx:xx:xx >> dwqe1: reset timeout >> eephy1 at dwqe1 phy 1: 88E1512 10/100/1000 PHY, rev. 1 >> "Intel Elkhart Lake UART" rev 0x11 at pci0 dev 30 function 0 not configured >> "Intel Elkhart Lake UART" rev 0x11 at pci0 dev 30 function 1 not configured >> pcib0 at pci0 dev 31 function 0 "Intel Elkhart Lake eSPI" rev 0x11 >> azalia0 at pci0 dev 31 function 3 "Intel Elkhart Lake HD Audio" rev 0x11: msi >> azalia0: no supported codecs >> ichiic0 at pci0 dev 31 function 4 "Intel Elkhart Lake SMBus" rev 0x11: >> apic 2 int 16 >> iic4 at ichiic0 >> iic4: addr 0x20 00=0c 01=00 02=0c 03=00 04=00 05=00 06=00 07=fe 0a=00 >> 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=00 12=00 13=00 3e=00 48=00 >> 4a=00 4e=00 fc=00 fe=00 words 00=0c00 01=000c 02=0c00 03=000c 04=0000 >> 05=0000 06=00fe 07=fe00 >> "Intel Elkhart Lake SPI" rev 0x11 at pci0 dev 31 function 5 not configured >> isa0 at pcib0 >> isadma0 at isa0 >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> vmm0 at mainbus0: VMX/EPT >> efifb at mainbus0 not configured >> uaudio0 at uhub0 port 4 configuration 1 interface 1 "Burr-Brown from >> TI USB audio CODEC" rev 2.00/1.00 addr 2 >> uaudio0: class v1, full-speed, sync, channels: 2 play, 1 rec, 7 ctls >> audio0 at uaudio0 >> ugen0 at uhub0 port 5 "Intel Bluetooth" rev 2.01/0.00 addr 3 >> uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB >> Receiver" rev 2.00/24.11 addr 4 >> uhidev0: iclass 3/1 >> ukbd0 at uhidev0: 8 variable keys, 6 key codes >> wskbd0 at ukbd0: console keyboard >> uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB >> Receiver" rev 2.00/24.11 addr 4 >> uhidev1: iclass 3/1, 8 report ids >> ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir >> wsmouse0 at ums0 mux 0 >> ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array >> wskbd1 at ucc0 mux 1 >> uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0 >> uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0 >> uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB >> Receiver" rev 2.00/24.11 addr 4 >> uhidev2: iclass 3/0, 33 report ids >> uhidpp0 at uhidev2 device 1 keyboard "K400 Plus" >> uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0 >> uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0 >> uvideo0 at uhub0 port 7 configuration 1 interface 0 "Logitech Logi >> Webcam C920e" rev 2.00/0.21 addr 5 >> video0 at uvideo0 >> ugen1 at uhub0 port 8 "FTDI Single RS232-HS" rev 2.00/9.00 addr 6 >> vscsi0 at root >> scsibus3 at vscsi0: 256 targets >> softraid0 at root >> scsibus4 at softraid0: 256 targets >> root on sd0a (659cf5a30145e83a.a) swap on sd0b dump on sd0b >> inteldrm0: 1920x1080, 32bpp >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 >> wskbd1: connecting to wsdisplay0 >> wsdisplay0: screen 1-5 added (std, vt100 emulation) >> iwx0: hw rev 0x420, fw 77.f92b5fed.0, pnvm 181407b3, address >> xx:xx:xx:xx:xx:xx >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> dwqe_watchdog >> >>>> On Wed, May 3, 2023 at 3:09 AM Stuart Henderson <s...@spacehopper.org> >>>> wrote: >>> >>>> On 2023/05/02 19:03, Ted Ri wrote: >>>> According to Compulab the Fitlet3 onboard Ethernet uses Marvell 88E1512 >>>> phys. The data sheet from Marvell is here: >>>> >>>> https://www.marvell.com/content/dam/marvell/en/public-collateral/phys-transceivers/marvell-phys-transceivers-alaska-88e151x-datasheet.pdf >>> >>> The PHY is likely already supported or very close to something >>> already supported, it's the network interface itself that isn't.
