On 2024/05/06 22:33, John Armstrong wrote: > Greetings, > > I have run into the issue since OpenBSD 7.3 and recently upgraded to OpenBSD > 7.5 where when > rebooting the system stalls at: > > Using drive 0, partition 3. > Loading..... > probing: pc0 con0 con1 con2 mem[630k 495m 15m 2386m 1m 24k 1024m a20=on] > disk:hd0+ > >> OpenBSD/amd64 Boot 3.65 > boot>
How long did you wait? Does it boot if you type "boot" and press enter? Does /etc/boot.conf exist and, if so, what are the contents? > Here is the system information: > System Info: > Intel Celeron J1900 Quad-core Processor (2M Cache, up to 2.4 GHz); 4GB RAM, > 32GB SSD dmesg: OpenBSD 7.5 (RAMDISK_CD) #76: Wed Mar 20 15:53:54 MDT 2024 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 4079570944 (3890MB) > avail mem = 3951734784 (3768MB) > random: good seed from bootblocks > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecec0 (51 entries) > bios0: vendor American Megatrends Inc. version "5.6.5" date 02/25/2019 > bios0: Default string Default string > acpi0 at bios0: ACPI 5.0 > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG LPIT HPET SSDT SSDT SSDT UEFI > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.46 MHz, 06-37-09, patch > 0000090a > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu0: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu0: apic clock running at 83MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 4 (RP04) > acpiec0 at acpi0: not present > acpicmos0 at acpi0 > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > com0 at acpi0 UAR0 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > com1 at acpi0 UR11 addr 0x2f8/0x8 irq 7: ns16550a, 16 byte fifo > com2 at acpi0 UR12 addr 0x3e8/0x8 irq 10: ns16550a, 16 byte fifo > com3 at acpi0 UR13 addr 0x2e8/0x8 irq 11: ns16550a, 16 byte fifo > "DMA0F28" at acpi0 not configured > "PNP0C0C" at acpi0 not configured > "PNP0C0E" at acpi0 not configured > acpicpu at acpi0 not configured > acpipwrres at acpi0 not configured > acpipwrres at acpi0 not configured > acpipwrres at acpi0 not configured > cpu0: using Silvermont MDS workaround > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x11 > vga1 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x11 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x11: msi, AHCI 1.3 > ahci0: port 1: 3.0Gb/s > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 1 lun 0: <ATA, Hoodisk SSD, SBFM> > t10.ATA_Hoodisk_SSD_M3YLCKC11269442_ > sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin > xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x11: msi, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel Bay Trail TXE" rev 0x11 at pci0 dev 26 function 0 not configured > "Intel Bay Trail HD Audio" rev 0x11 at pci0 dev 27 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x11: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:21 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x11: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x11: msi > pci3 at ppb2 bus 3 > re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:22 > rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x11: msi > pci4 at ppb3 bus 4 > ehci0 at pci0 dev 29 function 0 "Intel Bay Trail EHCI" rev 0x11: apic 1 int 23 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > "Intel Bay Trail LPC" rev 0x11 at pci0 dev 31 function 0 not configured > "Intel Bay Trail SMBus" rev 0x11 at pci0 dev 31 function 3 not configured > isa0 at mainbus0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Wired Keyboard > 400" rev 1.10/ > 1.10 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhub2 at uhub0 port 4 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub" > rev 2.00/60.60 > addr 3 > uhub3 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product > 0x07e6" rev 2.00/0.17 > addr 2 > softraid0 at root > scsibus1 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > WARNING: CHECK AND RESET THE DATE! > syncing disks... > OpenBSD 7.5 (GENERIC.MP) #82: Wed Mar 20 15:48:40 MDT 2024 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4079570944 (3890MB) > avail mem = 3934945280 (3752MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecec0 (51 entries) > bios0: vendor American Megatrends Inc. version "5.6.5" date 02/25/2019 > bios0: Default string Default string > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG LPIT HPET SSDT SSDT SSDT UEFI > acpi0: wakeup devices PS2K(S3) PS2M(S3) XHC1(S4) RP01(S4) PXSX(S4) RP02(S4) > PXSX(S4) RP03(S4) > PXSX(S4) RP04(S4) PXSX(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.34 MHz, 06-37-09, patch > 0000090d > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu0: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 83MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.65 MHz, 06-37-09, patch > 0000090d > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu1: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.42 MHz, 06-37-09, patch > 0000090d > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu2: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.72 MHz, 06-37-09, patch > 0000090d > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu3: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 4 (RP04) > acpiec0 at acpi0: not present > acpicmos0 at acpi0 > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > com0 at acpi0 UAR0 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > com1 at acpi0 UR11 addr 0x2f8/0x8 irq 7: ns16550a, 16 byte fifo > com2 at acpi0 UR12 addr 0x3e8/0x8 irq 10: ns16550a, 16 byte fifo > com3 at acpi0 UR13 addr 0x2e8/0x8 irq 11: ns16550a, 16 byte fifo > "DMA0F28" at acpi0 not configured > acpibtn0 at acpi0: PWRC > acpibtn1 at acpi0: SLPB > acpicpu0 at acpi0: C1(@1 halt!), PSS > acpicpu1 at acpi0: C1(@1 halt!), PSS > acpicpu2 at acpi0: C1(@1 halt!), PSS > acpicpu3 at acpi0: C1(@1 halt!), PSS > acpipwrres0 at acpi0: PLPE > acpipwrres1 at acpi0: PLPE > acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1 > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround > cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826, 1743, > 1660, 1577, 1494, > 1411, 1328 MHz > pci0 at mainbus0 bus 0 > iosf0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x11: mbi > inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x11 > drm0 at inteldrm0 > inteldrm0: msi, VALLEYVIEW, gen 7 > ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x11: msi, AHCI 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, Hoodisk SSD, SBFM> > t10.ATA_Hoodisk_SSD_M3YLCKC11269442_ > sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin > xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x11: msi, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel Bay Trail TXE" rev 0x11 at pci0 dev 26 function 0 not configured > azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x11: msi > azalia0: codecs: Realtek ALC662, Intel/0x2882, using Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x11: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:21 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x11: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x11: msi > pci3 at ppb2 bus 3 > re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:22 > rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x11: msi > pci4 at ppb3 bus 4 > ehci0 at pci0 dev 29 function 0 "Intel Bay Trail EHCI" rev 0x11: apic 1 int 23 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x11 > ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x11: apic 1 > int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0xa30 > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Wired Keyboard > 400" rev 1.10/ > 1.10 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhub2 at uhub0 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/60.60 > addr 3 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel product 0x07e6" rev > 2.00/0.17 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (da281c5f95c19845.a) swap on sd0b dump on sd0b > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > wskbd1: disconnecting from wsdisplay0 > wskbd1 detached > ukbd0 detached > uhidev0 detached > syncing disks... done > ehci0: halt timeout > rebooting... > OpenBSD 7.5 (GENERIC.MP) #82: Wed Mar 20 15:48:40 MDT 2024 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4079570944 (3890MB) > avail mem = 3934941184 (3752MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecec0 (51 entries) > bios0: vendor American Megatrends Inc. version "5.6.5" date 02/25/2019 > bios0: Default string Default string > acpi0 at bios0: ACPI 5.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG LPIT HPET SSDT SSDT SSDT UEFI > acpi0: wakeup devices PS2K(S3) PS2M(S3) XHC1(S4) RP01(S4) PXSX(S4) RP02(S4) > PXSX(S4) RP03(S4) > PXSX(S4) RP04(S4) PXSX(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.37 MHz, 06-37-09, patch > 0000090d > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu0: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 83MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.53 MHz, 06-37-09, patch > 0000090d > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu1: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2000.69 MHz, 06-37-09, patch > 0000090d > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu2: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2001.13 MHz, 06-37-09, patch > 0000090d > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu3: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 4 (RP04) > acpiec0 at acpi0: not present > acpicmos0 at acpi0 > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > com0 at acpi0 UAR0 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > com1 at acpi0 UR11 addr 0x2f8/0x8 irq 7: ns16550a, 16 byte fifo > com2 at acpi0 UR12 addr 0x3e8/0x8 irq 10: ns16550a, 16 byte fifo > com3 at acpi0 UR13 addr 0x2e8/0x8 irq 11: ns16550a, 16 byte fifo > "DMA0F28" at acpi0 not configured > acpibtn0 at acpi0: PWRC > acpibtn1 at acpi0: SLPB > acpicpu0 at acpi0: C1(@1 halt!), PSS > acpicpu1 at acpi0: C1(@1 halt!), PSS > acpicpu2 at acpi0: C1(@1 halt!), PSS > acpicpu3 at acpi0: C1(@1 halt!), PSS > acpipwrres0 at acpi0: PLPE > acpipwrres1 at acpi0: PLPE > acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1 > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround > cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826, 1743, > 1660, 1577, 1494, > 1411, 1328 MHz > pci0 at mainbus0 bus 0 > iosf0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x11: mbi > inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x11 > drm0 at inteldrm0 > inteldrm0: msi, VALLEYVIEW, gen 7 > ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x11: msi, AHCI 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, Hoodisk SSD, SBFM> > t10.ATA_Hoodisk_SSD_M3YLCKC11269442_ > sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin > xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x11: msi, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel Bay Trail TXE" rev 0x11 at pci0 dev 26 function 0 not configured > azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x11: msi > azalia0: codecs: Realtek ALC662, Intel/0x2882, using Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x11: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:21 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x11: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x11: msi > pci3 at ppb2 bus 3 > re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:22 > rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x11: msi > pci4 at ppb3 bus 4 > ehci0 at pci0 dev 29 function 0 "Intel Bay Trail EHCI" rev 0x11: apic 1 int 23 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x11 > ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x11: apic 1 > int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0xa30 > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > uhidev0 at uhub0 port 1 configuration 1 interface 0 "Microsoft Wired Keyboard > 400" rev 1.10/ > 1.10 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhub2 at uhub0 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/60.60 > addr 3 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel product 0x07e6" rev > 2.00/0.17 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (da281c5f95c19845.a) swap on sd0b dump on sd0b > inteldrm0: 1920x1080, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > pf# dmesg > dmesg.txt > pf# ls > .Xdefaults .cshrc .cvsrc .login > .mailrc > .profile .ssh dhcpd.conf > dmesg.txt > pf.conf pf.conf.bak pf.conf.test > ripe2cidr_country.sh > pf# vi dmesg.txt > application processor) > cpu3: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz, 2001.10 MHz, 06-37-09, patch > 0000090d > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJ > UST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN > cpu3: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 16-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 4 (RP04) > acpiec0 at acpi0: not present > acpicmos0 at acpi0 > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > com0 at acpi0 UAR0 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > com1 at acpi0 UR11 addr 0x2f8/0x8 irq 7: ns16550a, 16 byte fifo > com2 at acpi0 UR12 addr 0x3e8/0x8 irq 10: ns16550a, 16 byte fifo > com3 at acpi0 UR13 addr 0x2e8/0x8 irq 11: ns16550a, 16 byte fifo > "DMA0F28" at acpi0 not configured > acpibtn0 at acpi0: PWRC > acpibtn1 at acpi0: SLPB > acpicpu0 at acpi0: C1(@1 halt!), PSS > acpicpu1 at acpi0: C1(@1 halt!), PSS > acpicpu2 at acpi0: C1(@1 halt!), PSS > acpicpu3 at acpi0: C1(@1 halt!), PSS > acpipwrres0 at acpi0: PLPE > acpipwrres1 at acpi0: PLPE > acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1 > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: using VERW MDS workaround > cpu0: Enhanced SpeedStep 2000 MHz: speeds: 1993, 1992, 1909, 1826, 1743, > 1660, 1577, 1494, > 1411, 1328 MHz > pci0 at mainbus0 bus 0 > iosf0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x11: mbi > inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x11 > drm0 at inteldrm0 > inteldrm0: msi, VALLEYVIEW, gen 7 > ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x11: msi, AHCI 1.3 > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, Hoodisk SSD, SBFM> > t10.ATA_Hoodisk_SSD_M3YLCKC11269442_ > sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin > xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x11: msi, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel Bay Trail TXE" rev 0x11 at pci0 dev 26 function 0 not configured > azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x11: msi > azalia0: codecs: Realtek ALC662, Intel/0x2882, using Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x11: msi > pci1 at ppb0 bus 1 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:21 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x11: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x11: msi > pci3 at ppb2 bus 3 > re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL > (0x2c80), msi, address > 00:e0:4c:82:ca:22 > rgephy1 at re1 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x11: msi > pci4 at ppb3 bus 4 > ehci0 at pci0 dev 29 function 0 "Intel Bay Trail EHCI" rev 0x11: apic 1 int 23 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x11 > ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x11: apic 1 > int 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0xa30 > vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) > dmesg.txt: unmodified: line 1 > Any suggestions on how I can correct this issue? Thank you John >