Hello, It seems I'm not the only one having some trouble with Xorg/xenocara in recent snapshots. Perhaps there is a common cause.
On my laptop (Thinkpad T490S) I use mostly snapshots, troubles are seldom. The snapshot from August 13th worked fine, updating to the snapshot of August 17th seemed to break the startup of Xorg. I tested also with the snapshots of August 16th and 18th, same problem. So I suspect some change between 13th and 16th must be the cause. So for now I use the snapshot of August 13th, to which I reverted back, which works just fine. Xorg/xenodm doesn't come up. The screen stays black. The backlight of the laptop screen is on, though. And the cpu is kept quite busy, soon after the attempted start of X the fan is switched on and the temperature increase can easily be felt. After a few minutes, Xorg apparently segfaults and I just get to the regular command line. I seems the segfault is at or after the loading of the DRI2 module. There is an earlier error (EE in log) about a missing /usr/X11R6/lib/modules/dri/i965_dri.so failed, which has been noted by someone else with the same problem of not being able to start X, but I don't think this is it (although this EE seems funny, I don't think above mentioned file is in base?). I hope the cause can be identified and fixed! Below is my Xorg.0.log and my dmesg. X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 [ 35.909] Current Operating System: OpenBSD zeta.lvber21.nl 7.6 GENERIC.MP#263 amd64 [ 35.909] [ 35.909] Current version of pixman: 0.42.2 [ 35.909] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 35.909] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 35.909] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 19 07:43:00 2024 [ 35.910] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 35.910] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 35.911] (==) No Layout section. Using the first Screen section. [ 35.911] (==) No screen section available. Using defaults. [ 35.911] (**) |-->Screen "Default Screen Section" (0) [ 35.911] (**) | |-->Monitor "<default monitor>" [ 35.912] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 35.912] (**) | |-->Device "drm" [ 35.912] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 35.912] (**) Allowing byte-swapped clients [ 35.912] (==) Automatically adding devices [ 35.912] (==) Automatically enabling devices [ 35.912] (==) Not automatically adding GPU devices [ 35.912] (==) Automatically binding GPU devices [ 35.912] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 35.912] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 35.912] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 35.912] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 35.913] (II) Loader magic: 0x16d22861500 [ 35.913] (II) Module ABI versions: [ 35.913] X.Org ANSI C Emulation: 0.4 [ 35.913] X.Org Video Driver: 25.2 [ 35.913] X.Org XInput driver : 24.4 [ 35.913] X.Org Server Extension : 10.0 [ 35.913] (--) PCI:*(0@0:2:0) 8086:3ea0:17aa:2286 rev 2, Mem @ 0xc0000000/16777216, 0xa0000000/536870912, I/O @ 0x00002000/64 [ 35.913] (II) LoadModule: "glx" [ 35.914] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 35.925] (II) Module glx: vendor="X.Org Foundation" [ 35.925] compiled for 1.21.1.13, module version = 1.0.0 [ 35.925] ABI class: X.Org Server Extension, version 10.0 [ 35.925] (II) LoadModule: "intel" [ 35.925] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [ 35.927] (II) Module intel: vendor="X.Org Foundation" [ 35.927] compiled for 1.21.1.13, module version = 2.99.916 [ 35.927] Module class: X.Org Video Driver [ 35.927] ABI class: X.Org Video Driver, version 25.2 [ 35.928] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 35.928] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 35.928] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 35.928] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 35.938] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103 [ 35.940] (WW) intel(0): Unknown chipset [ 35.940] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2 [ 35.940] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 35.940] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 35.940] (==) intel(0): RGB weight 888 [ 35.940] (==) intel(0): Default visual is TrueColor [ 35.940] (**) intel(0): Option "TearFree" "true" [ 35.941] (II) intel(0): Output eDP1 has no monitor section [ 35.941] (--) intel(0): Found backlight control interface wscons (type 'platform') for output eDP1 [ 35.941] (II) intel(0): Enabled output eDP1 [ 35.941] (II) intel(0): Output DP1 has no monitor section [ 35.941] (II) intel(0): Enabled output DP1 [ 35.941] (II) intel(0): Output HDMI1 has no monitor section [ 35.941] (II) intel(0): Enabled output HDMI1 [ 35.941] (II) intel(0): Output DP2 has no monitor section [ 35.941] (II) intel(0): Enabled output DP2 [ 35.941] (II) intel(0): Output HDMI2 has no monitor section [ 35.941] (II) intel(0): Enabled output HDMI2 [ 35.941] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 35.941] (II) intel(0): Output VIRTUAL1 has no monitor section [ 35.941] (II) intel(0): Enabled output VIRTUAL1 [ 35.941] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0 [ 35.942] (**) intel(0): TearFree enabled [ 35.942] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 35.942] (--) intel(0): Display dimensions: (310, 170) mm [ 35.942] (--) intel(0): DPI set to (157, 161) [ 35.942] (II) Loading sub module "dri3" [ 35.942] (II) LoadModule: "dri3" [ 35.942] (II) Module "dri3" already built-in [ 35.942] (II) Loading sub module "dri2" [ 35.942] (II) LoadModule: "dri2" [ 35.942] (II) Module "dri2" already built-in [ 35.942] (II) Loading sub module "present" [ 35.942] (II) LoadModule: "present" [ 35.942] (II) Module "present" already built-in [ 35.943] (II) intel(0): SNA initialized with generic backend [ 35.943] (==) intel(0): Backing store enabled [ 35.943] (==) intel(0): Silken mouse enabled [ 35.944] (II) intel(0): HW Cursor enabled [ 35.946] (==) intel(0): DPMS enabled [ 35.947] (II) intel(0): Textured video not supported on this hardware [ 35.947] (II) intel(0): [DRI2] Setup complete [ 35.947] (II) intel(0): [DRI2] DRI driver: i965 [ 35.947] (II) intel(0): [DRI2] VDPAU driver: i965 [ 35.947] (II) intel(0): direct rendering: DRI2 DRI3 enabled [ 35.947] (II) intel(0): hardware support for Present enabled [ 35.948] (II) Initializing extension Generic Event Extension [ 35.949] (II) Initializing extension SHAPE [ 35.949] (II) Initializing extension MIT-SHM [ 35.949] (II) Initializing extension XInputExtension [ 35.950] (II) Initializing extension XTEST [ 35.950] (II) Initializing extension BIG-REQUESTS [ 35.951] (II) Initializing extension SYNC [ 35.951] (II) Initializing extension XKEYBOARD [ 35.952] (II) Initializing extension XC-MISC [ 35.952] (II) Initializing extension SECURITY [ 35.952] (II) Initializing extension XFIXES [ 35.953] (II) Initializing extension RENDER [ 35.953] (II) Initializing extension RANDR [ 35.953] (II) Initializing extension COMPOSITE [ 35.954] (II) Initializing extension DAMAGE [ 35.955] (II) Initializing extension MIT-SCREEN-SAVER [ 35.955] (II) Initializing extension DOUBLE-BUFFER [ 35.955] (II) Initializing extension RECORD [ 35.956] (II) Initializing extension DPMS [ 35.956] (II) Initializing extension Present [ 35.956] (II) Initializing extension DRI3 [ 35.957] (II) Initializing extension X-Resource [ 35.957] (II) Initializing extension XVideo [ 35.957] (II) Initializing extension XVideo-MotionCompensation [ 35.957] (II) Initializing extension GLX [ 35.958] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/i965_dri.so failed (File not found) [ 35.958] (EE) AIGLX error: unable to load driver i965 [ 36.005] (II) IGLX: Loaded and initialized swrast [ 36.005] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 36.005] (II) Initializing extension XFree86-VidModeExtension [ 36.006] (II) Initializing extension XFree86-DGA [ 36.006] (II) Initializing extension XFree86-DRI [ 36.006] (II) Initializing extension DRI2 [ 263.531] (EE) Segmentation fault at address 0x16f26e9d000 [ 263.532] (EE) Fatal server error: [ 263.532] (EE) Caught signal 11 (Segmentation fault). Server aborting [ 263.532] (EE) [ 263.532] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 263.532] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 263.532] (EE) [ 263.544] (EE) Server terminated with error (1). Closing log file. ** DMESG ** OpenBSD 7.6-beta (GENERIC.MP) #263: Sun Aug 18 12:20:10 MDT 2024 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16793112576 (16015MB) avail mem = 16260775936 (15507MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.1 @ 0x8de49000 (67 entries) bios0: vendor LENOVO version "N2JET99W (1.77 )" date 06/22/2022 bios0: LENOVO 20NYS3L700 efi0 at bios0: UEFI 2.6 efi0: Lenovo rev 0x1770 acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT UEFI SSDT HPET APIC MCFG ECDT SSDT SSDT BOOT SLIC SSDT LPIT WSMT SSDT DBGP DBG2 MSDM BATB NHLT DMAR ASF! FPDT UEFI acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 23999999 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> cpu0: cpuid 6 eax=27f7<SENSOR,ARAT> ecx=9<EFFFREQ> cpu0: cpuid 7.0 ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc000e00<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD> cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP> cpu0: cpuid 80000007 edx=100<ITSC> cpu0: msr 10a=a0a0cab<IBRS_ALL,SKIP_L1DFL,MDS_NO,TSX_CTRL,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,RRSBA,GDS_CTRL,RFDS_NO> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 8MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu3: smt 0, core 3, package 0 cpu4 at mainbus0: apid 1 (application processor) cpu4: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu4: smt 1, core 0, package 0 cpu5 at mainbus0: apid 3 (application processor) cpu5: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu5: smt 1, core 1, package 0 cpu6 at mainbus0: apid 5 (application processor) cpu6: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu6: smt 1, core 2, package 0 cpu7 at mainbus0: apid 7 (application processor) cpu7: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0c, patch 000000fc cpu7: smt 1, core 3, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus -1 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpiprt5 at acpi0: bus 2 (RP05) acpiprt6 at acpi0: bus -1 (RP06) acpiprt7 at acpi0: bus -1 (RP07) acpiprt8 at acpi0: bus -1 (RP08) acpiprt9 at acpi0: bus 60 (RP09) acpiprt10 at acpi0: bus -1 (RP10) acpiprt11 at acpi0: bus -1 (RP11) acpiprt12 at acpi0: bus -1 (RP12) acpiprt13 at acpi0: bus 61 (RP13) acpiprt14 at acpi0: bus -1 (RP14) acpiprt15 at acpi0: bus -1 (RP15) acpiprt16 at acpi0: bus -1 (RP16) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 acpithinkpad0 at acpi0: version 2.0 acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "02DL013" serial 2685 type LiP oem "LGC" "LEN0100" at acpi0 not configured "INT3403" at acpi0 not configured acpicmos0 at acpi0 pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 0xfd6a0000/0x10000 irq 14, 320 pins "PNP0C14" at acpi0 not configured "INT0E0C" at acpi0 not configured acpibtn0 at acpi0: SLPB(wakeup) "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured acpibtn1 at acpi0: LID_(wakeup) "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT3400" at acpi0 not configured "USBC000" at acpi0 not configured acpipwrres0 at acpi0: PUBS, resource for XHC_ acpipwrres1 at acpi0: USBC, resource for XDCI acpipwrres2 at acpi0: PXP_, resource for RP05 acpipwrres3 at acpi0: PXP_, resource for RP07, PXSX acpipwrres4 at acpi0: V0PR acpipwrres5 at acpi0: V1PR acpipwrres6 at acpi0: V2PR acpipwrres7 at acpi0: WRST acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu6 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu7 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpitz0 at acpi0: critical temperature is 128 degC acpipwrres8 at acpi0: PIN_ acpipwrres9 at acpi0: PINP acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1795 MHz: speeds: 2101, 2100, 1900, 1800, 1700, 1600, 1500, 1400, 1200, 1100, 1000, 800, 700, 600, 500, 400 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x0c inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x02 drm0 at inteldrm0 inteldrm0: msi, COFFEELAKE, gen 9 "Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured pchtemp0 at pci0 dev 18 function 0 "Intel 300 Series Thermal" rev 0x30 xhci0 at pci0 dev 20 function 0 "Intel 300 Series xHCI" rev 0x30: msi, xHCI 1.10 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 300 Series Shared SRAM" rev 0x30 at pci0 dev 20 function 2 not configured "Intel 300 Series MEI" rev 0x30 at pci0 dev 22 function 0 not configured puc0 at pci0 dev 22 function 3 "Intel 300 Series KT" rev 0x30: ports: 16 com com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo ppb0 at pci0 dev 28 function 0 "Intel 300 Series PCIE" rev 0xf0: msi pci1 at ppb0 bus 1 sdhc0 at pci1 dev 0 function 0 vendor "Genesys Logic", unknown product 0x9750 rev 0x01: apic 2 int 16 sdhc0: SDHC 4.20, 50 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, ddr52, dma ppb1 at pci0 dev 28 function 4 "Intel 300 Series PCIE" rev 0xf0: msi pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 "Intel JHL6240 Thunderbolt 3" rev 0x01 pci3 at ppb2 bus 3 ppb3 at pci3 dev 0 function 0 "Intel JHL6240 Thunderbolt 3" rev 0x01: msi pci4 at ppb3 bus 4 "Intel JHL6240 Thunderbolt 3" rev 0x01 at pci4 dev 0 function 0 not configured ppb4 at pci3 dev 1 function 0 "Intel JHL6240 Thunderbolt 3" rev 0x01: msi pci5 at ppb4 bus 5 ppb5 at pci3 dev 2 function 0 "Intel JHL6240 Thunderbolt 3" rev 0x01: msi pci6 at ppb5 bus 58 xhci1 at pci6 dev 0 function 0 "Intel JHL6240 Thunderbolt 3" rev 0x01: msi, xHCI 1.10 usb1 at xhci1: USB revision 3.0 uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 ppb6 at pci0 dev 29 function 0 "Intel 300 Series PCIE" rev 0xf0: msi pci7 at ppb6 bus 60 iwx0 at pci7 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix ppb7 at pci0 dev 29 function 4 "Intel 300 Series PCIE" rev 0xf0: msi pci8 at ppb7 bus 61 nvme0 at pci8 dev 0 function 0 "SanDisk PC SN520" rev 0x01: msix, NVMe 1.3 nvme0: WDC PC SN520 SDAPNUW-256G-1006, firmware 20120006, serial 20231S450107 scsibus1 at nvme0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <NVMe, WDC PC SN520 SDA, 2012> sd0: 244198MB, 512 bytes/sector, 500118192 sectors pcib0 at pci0 dev 31 function 0 "Intel 300 Series LPC" rev 0x30 azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x30: msi azalia0: codecs: Realtek ALC257, Intel/0x280b, using Realtek ALC257 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 300 Series SMBus" rev 0x30: apic 2 int 16 iic0 at ichiic0 "Intel 300 Series SPI" rev 0x30 at pci0 dev 31 function 5 not configured em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x30: msi, address 98:fa:9b:e1:11:16 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: Elantech Clickpad, version 4, firmware 0x7f3001 wsmouse1 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhidev0 at uhub0 port 3 configuration 1 interface 0 "Telink Trust Wireless Silent Mouse" rev 1.10/1.00 addr 2 uhidev0: iclass 3/1, 5 report ids ums0 at uhidev0 reportid 1: 5 buttons, Z dir wsmouse2 at ums0 mux 0 ucc0 at uhidev0 reportid 3: 652 usages, 20 keys, array wskbd1 at ucc0 mux 1 uhid0 at uhidev0 reportid 4: input=1, output=0, feature=0 uhid1 at uhidev0 reportid 5: input=0, output=0, feature=7 uhidev1 at uhub0 port 3 configuration 1 interface 1 "Telink Trust Wireless Silent Mouse" rev 1.10/1.00 addr 2 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33 wskbd2 at ukbd0 mux 1 uhidev2 at uhub0 port 6 configuration 1 interface 0 "ELAN Touchscreen" rev 2.00/59.11 addr 3 uhidev2: iclass 3/0, 68 report ids ums1 at uhidev2 reportid 1: 1 button, tip wsmouse3 at ums1 mux 0 uhid2 at uhidev2 reportid 2: input=64, output=0, feature=0 uhid3 at uhidev2 reportid 3: input=0, output=63, feature=0 uhid4 at uhidev2 reportid 4: input=19, output=0, feature=0 uhid5 at uhidev2 reportid 10: input=0, output=0, feature=1 ums2 at uhidev2 reportid 68: 0 buttons wsmouse4 at ums2 mux 0 sdmmc0: can't enable card uvideo0 at uhub0 port 8 configuration 1 interface 0 "8SSC20F27068L1GZ9827E49 Integrated Camera" rev 2.01/0.24 addr 4 video0 at uvideo0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> sd1: 243938MB, 512 bytes/sector, 499585087 sectors root on sd1a (42f16d3e58d46d20.a) swap on sd1b dump on sd1b inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) iwx0: hw rev 0x340, fw 77.a20fb07d.0, address dc:fb:48:b3:32:9c iwx0: fatal firmware error
