Hi! I can not upgrade (install76.iso) /sysupgrade) from 7.5 to 7.6.
CONGRATULATIONS! Your OpenBSD upgrade has been successfully completed!
The system has been rebooted, my computer does not boot.
ddb(1)> show panic *cpu1: kernel diagnostic assertion "ebx == fpu_save_len"
failed: file "/usr/src/sys/arch/amd64/amd64/cpu.c", line 813 ddb{1}> trace
db_enter() at db_enter+0x14 panic(ffffffff82420f94) at panic+0xdd
__assert(ffffffff823d4dc1,fffffff823a4224,32d,fffffff8232cfa) at __assert+0x29
cpu_init(ffff8000313bbff0) at cpu_init+0x144 cpu_hatch(ffff8000313bbff0) at
cpu_hatch+0x286 cpu_spinup_finish() at cpu_spinup_finished+0x8f end trace
frame: 0x0, count: -6 OpenBSD 7.5 works well. Here is my dmesg on same
computer. But hard drive is not only same. OpenBSD 7.5 (GENERIC.MP) #2: Mon Sep
16 15:56:43 CEST 2024
r...@syspatch-75-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8486846464 (8093MB) avail mem = 8208592896 (7828MB) random: good
seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at
root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (35 entries) bios0: vendor
Award Software International, Inc. version "F4" date 02/21/2012 bios0: Gigabyte
Technology Co., Ltd. H61M-DS2 acpi0 at bios0: ACPI 1.0 acpi0: sleep states S0
S3 S4 S5 acpi0: tables DSDT FACP MSDM HPET MCFG ASPT SSPT EUDS TAMG APIC SSDT
MATS acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5)
PEX4(S5) PEX5(S5) PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USBE(S3) USE2(S3)
AZAL(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179
Hz acpimcfg0 at acpi0 acpimcfg0: addr 0xf4000000, bus 0-63 acpimadt0 at acpi0
addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0:
Intel(R) Core(TM) i3-2120T CPU @ 2.60GHz, 2594.14 MHz, 06-2a-07, patch 0000002f
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache mtrr: Pentium Pro MTRR support, 10 var
ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu1 at mainbus0:
apid 1 (application processor) cpu1: Intel(R) Core(TM) i3-2120T CPU @ 2.60GHz,
2594.16 MHz, 06-2a-07, patch 0000002f cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 3MB 64b/line 12-way L3 cache cpu2 at mainbus0: apid 2
(application processor) cpu2: Intel(R) Core(TM) i3-2120T CPU @ 2.60GHz, 2594.16
MHz, 06-2a-07, patch 0000002f cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MELTDOWN
cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 3MB 64b/line 12-way L3 cache cpu3 at mainbus0: apid 3
(application processor) cpu3: Intel(R) Core(TM) i3-2120T CPU @ 2.60GHz, 2594.21
MHz, 06-2a-07, patch 0000002f cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MELTDOWN
cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 3MB 64b/line 12-way L3 cache ioapic0 at mainbus0: apid 2 pa
0xfec00000, version 20, 24 pins, remapped acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus -1 (PEG1) acpiprt3 at
acpi0: bus 1 (PEX0) acpiprt4 at acpi0: bus -1 (PEX1) acpiprt5 at acpi0: bus -1
(PEX2) acpiprt6 at acpi0: bus -1 (PEX3) acpiprt7 at acpi0: bus -1 (PEX4)
acpiprt8 at acpi0: bus 2 (PEX5) acpiprt9 at acpi0: bus -1 (PEX6) acpiprt10 at
acpi0: bus -1 (PEX7) acpibtn0 at acpi0: PWRB acpipci0 at acpi0 PCI0 acpicmos0
at acpi0 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpicpu0 at acpi0: C1(@1 halt!), PSS acpicpu1 at acpi0: C1(@1 halt!), PSS
acpicpu2 at acpi0: C1(@1 halt!), PSS acpicpu3 at acpi0: C1(@1 halt!), PSS cpu0:
using IvyBridge MDS workaround cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2600,
2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600 MHz pci0 at mainbus0
bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 inteldrm0 at
pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 drm0 at inteldrm0
inteldrm0: apic 2 int 16, SANDYBRIDGE, gen 6 "Intel 6 Series MEI" rev 0x04 at
pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 6
Series USB" rev 0x05: apic 2 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at
usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: apic 2
int 22 azalia0: codecs: Realtek ALC887 audio0 at azalia0 ppb0 at pci0 dev 28
function 0 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 16 pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 17
pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06:
RTL8168E/8111E (0x2c00), apic 2 int 17, address 50:3e:aa:16:94:de rgephy0 at
re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 4 ehci1 at pci0 dev 29 function 0
"Intel 6 Series USB" rev 0x05: apic 2 int 23 usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5 pci3
at ppb2 bus 3 pcib0 at pci0 dev 31 function 0 "Intel H61 LPC" rev 0x05 ahci0 at
pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: apic 2 int 19, AHCI 1.3
ahci0: port 0: 1.5Gb/s ahci0: port 1: 3.0Gb/s ahci0: port 4: 3.0Gb/s ahci0:
port 5: 3.0Gb/s scsibus1 at ahci0: 32 targets cd0 at scsibus1 targ 0 lun 0:
<Optiarc, DVD RW AD-7173S, 1-21> removable sd0 at scsibus1 targ 1 lun 0: <ATA,
CT120BX500SSD1, M6C> naa.0000000000000000 sd0: 114473MB, 512 bytes/sector,
234441648 sectors, thin sd1 at scsibus1 targ 4 lun 0: <ATA, Hitachi HDS72105,
JP2O> naa.5000cca371d9be55 sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus1 targ 5 lun 0: <ATA, WDC WD5000AAKX-0, 15.0>
naa.50014ee104481aea sd2: 476940MB, 512 bytes/sector, 976773168 sectors ichiic0
at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18 iic0
at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 spdmem1 at iic0
addr 0x52: 4GB DDR3 SDRAM PC3-10600 isa0 at pcib0 isadma0 at isa0 pckbc0 at
isa0 port 0x60/5 irq 1 irq 12 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at
isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0x290
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation) uhub2 at uhub0 port 1
configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2 uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech
USB Receiver" rev 2.00/30.00 addr 3 uhidev0: iclass 3/1 ums0 at uhidev0: 16
buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub3 port 1
configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/30.00 addr 3
uhidev1: iclass 3/0, 17 report ids uhidpp0 at uhidev1 device 1 mouse "M185"
ucc0 at uhidev1 reportid 3: 652 usages, 20 keys, array wskbd0 at ucc0 mux 1
uhidev2 at uhub3 port 2 configuration 1 interface 0 "SEM USB Keyboard" rev
1.10/1.10 addr 4 uhidev2: iclass 3/1 ukbd0 at uhidev2: 8 variable keys, 6 key
codes wskbd1 at ukbd0: console keyboard uhidev3 at uhub3 port 2 configuration 1
interface 1 "SEM USB Keyboard" rev 1.10/1.10 addr 4 uhidev3: iclass 3/0, 2
report ids ucc1 at uhidev3 reportid 1: 573 usages, 20 keys, array wskbd2 at
ucc1 mux 1 uhid0 at uhidev3 reportid 2: input=1, output=0, feature=0 vscsi0 at
root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0:
256 targets root on sd2a (0b6b5b3390112daa.a) swap on sd2b dump on sd2b
inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100
emulation), using wskbd1 wskbd0: connecting to wsdisplay0 wskbd2: connecting to
wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) intel_pool_init:
stub drm:pid83331:intel_gt_reset *NOTICE* [drm] Resetting chip for stopped
heartbeat on rcs0
