hi,
sometimes, since the last month, my system is sometimes near locking
up under high cpu usage, usually with firefox:
load averages: 5.32, 3.69, 3.12 xha.li 12:21:10
170 processes: 1 running, 165 idle, 4 on processor up 3 days 00:42:08
CPU0 states: 18.1% user, 0.0% nice, 25.9% sys, 52.1% spin, 1.4% intr, 2.6%
idle
CPU1 states: 22.3% user, 0.0% nice, 45.8% sys, 29.2% spin, 0.0% intr, 2.6%
idle
CPU2 states: 28.4% user, 0.0% nice, 40.3% sys, 30.0% spin, 0.0% intr, 1.4%
idle
CPU3 states: 30.2% user, 0.0% nice, 29.6% sys, 35.7% spin, 0.0% intr, 4.5%
idle
Memory: Real: 1211M/11G act/tot Free: 4116M Cache: 8018M Swap: 0K/16G
PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
53970 lorenz 64 0 595M 619M onproc/1 - 90:40 64.36% firefox
77238 lorenz 64 0 35M 170M onproc/2 - 15:34 29.05% sway
20530 root 10 0 0K 2328K sleep/2 bored 3:37 22.31% srdis
69754 root 105 20 0K 2328K sleep/1 pgzero 0:07 9.91%
zerothread
35039 lorenz 2 0 14M 26M sleep/3 kqread 0:03 4.98% foot
75228 lorenz 2 0 163M 161M sleep/3 kqread 17:31 4.59% firefox
36938 lorenz 2 0 13M 23M sleep/1 kqread 0:02 3.52% foot
37580 root 10 0 0K 2328K sleep/0 bored 1:23 2.83% i915
72996 _sndio 2 -20 4980K 3764K sleep/0 kqread 34:37 2.69% sndiod
32851 lorenz 18 0 1352K 1044K sleep/1 sigsusp 0:08 1.27% sh
60161 lorenz 2 0 22M 35M sleep/3 kqread 0:16 1.17% foot
67994 root 28 0 0K 2328K run/3 - 0:21 1.03% sensors
29332 root 10 0 0K 2328K sleep/0 acpi0 1:20 0.78% acpi0
59777 root 10 0 792K 1172K sleep/1 nanoslp 0:02 0.78%
sensorsd
66253 lorenz 18 0 1352K 968K sleep/2 sigsusp 0:00 0.78% sh
33133 lorenz 3 0 1360K 1068K sleep/2 ttyin 0:00 0.78% ksh
90245 root 10 0 0K 2328K sleep/2 bored 2:35 0.73%
i915_flip
57657 root 2 0 1088K 1348K sleep/2 kqread 0:09 0.73% slaacd
when closing firefox it gets even crazier:
load averages: 5.10, 3.60, 3.08 xha.li 12:21:00
173 processes: 1 starting, 3 running, 165 idle, 1 dead, 3 on processor up 3
days 00:41:58
CPU0 states: 1.2% user, 0.0% nice, 20.6% sys, 77.0% spin, 0.6% intr, 0.6%
idle
CPU1 states: 10.1% user, 0.0% nice, 28.1% sys, 54.1% spin, 0.0% intr, 7.7%
idle
CPU2 states: 9.1% user, 0.0% nice, 45.2% sys, 36.1% spin, 0.0% intr, 9.7%
idle
CPU3 states: 14.5% user, 0.0% nice, 31.6% sys, 44.7% spin, 0.0% intr, 9.2%
idle
Memory: Real: 2653M/13G act/tot Free: 2350M Cache: 8122M Swap: 0K/16G
PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
53970 lorenz 64 0 617M 648M onproc/0 - 90:33 85.74% firefox
77238 lorenz 64 0 35M 203M onproc/0 - 15:32 35.50% sway
20530 root 10 0 0K 2428K sleep/0 bored 3:33 16.85% srdis
36447 lorenz 2 0 512M 581M sleep/3 kqread 8:57 8.69% firefox
12445 lorenz 2 0 247M 300M sleep/2 kqread 1:16 8.20% firefox
72996 _sndio 2 -20 4980K 3764K sleep/0 kqread 34:37 4.74% sndiod
37580 root 10 0 0K 2428K sleep/0 bored 1:23 3.76% i915
75553 lorenz 2 0 285M 358M sleep/0 kqread 0:30 3.76% firefox
75228 lorenz 2 0 163M 189M run/3 kqread 17:31 2.39% firefox
32851 lorenz 18 0 1352K 1044K sleep/3 sigsusp 0:08 1.51% sh
90245 root 10 0 0K 2428K sleep/1 bored 2:34 1.27%
i915_flip
60161 lorenz 2 0 22M 39M sleep/1 kqread 0:15 1.12% foot
69754 root 105 20 0K 2428K run/0 - 0:05 0.83%
zerothread
67994 root 10 0 0K 2428K sleep/3 bored 0:21 0.78% sensors
91201 lorenz 2 0 9616K 24M sleep/3 kqread 0:17 0.78% swaybar
33518 lorenz 2 0 64M 128M sleep/2 kqread 0:02 0.78% firefox
80844 root 10 0 0K 2428K sleep/3 usbtsk 4:39 0.73% usbtask
44486 lorenz 2 0 29M 83M sleep/1 kqread 0:04 0.68% firefox
the system will be in a very slow state from then on for the next
20 or so seconds. it doesn't matter if firefox is closed already
or if the CPU is at near 100% idle. applications will be very slow
to launch, and everything will generally be very laggy and the
system spins a lot.
is this is a known issue, does anyone else have this?
what are the best ways to investigate this? i would try to use
btrace to figure out where exactly it is spending all of this time
spinning, and afterwards try to debug based on the lock.
unfortunately, however, it's quite hard/near impossible to
reproduce. it just happens sometimes. not really related to
cpu temp/system usage either, i.e. running a kernel build
is completely fine. timing wise it *could* be related to
the futex diff, but i doubt it.
i'm running the nearly latest code in -current, last commit is:
"Adjust desired test results to dbm_dump.c rev. 1.4." from schwarze@
a8b5f1d3c07c604daa494209f3328de8ba608d29
thanks!
~ lorenz
dmesg:
OpenBSD 7.7-current (GENERIC.MP) #1: Thu Jun 12 21:37:09 CEST 2025
r...@xha.li:/sys/arch/amd64/compile/GENERIC.MP
real mem = 16846938112 (16066MB)
avail mem = 16320663552 (15564MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x70368000 (53 entries)
bios0: vendor LENOVO version "R1EET46W(1.46 )" date 12/08/2021
bios0: LENOVO 20TD0005GE
efi0 at bios0: UEFI 2.7
efi0: Lenovo rev 0x12e0
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT ECDT HPET APIC MCFG SSDT SSDT
SSDT NHLT SSDT SSDT SSDT LPIT WSMT SSDT DBGP DBG2 MSDM SSDT BATB DMAR SSDT BGRT
PTDT UEFI FPDT
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEGP(S4) PEGP(S4) XHCI(S3) XDCI(S3)
HDAS(S3) RP01(S3) PXSX(S4) RP02(S3) PXSX(S4) RP03(S3) PXSX(S4) RP04(S3)
PXSX(S4) RP05(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4680.82 MHz, 06-8c-01,
patch 000000b8
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=77fafbbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=17eff7<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0
ebx=f3bfa7eb<FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL>
ecx=18c05fce<AVX512VBMI,UMIP,PKU>
edx=fc100710<SRBDS_CTRL,MD_CLEAR,IBT,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=5, gp=8, gpwidth=48, ff=4, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG>
ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr
10a=a005c6b<IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,DOITM,FBSDP_NO,GDS_CTRL,RFDS_NO>
cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.1.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4689.20 MHz, 06-8c-01,
patch 000000b8
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.58 MHz, 06-8c-01,
patch 000000b8
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.58 MHz, 06-8c-01,
patch 000000b8
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus 2 (PEG0)
acpiprt2 at acpi0: bus 3 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 7 (RP09)
acpiprt11 at acpi0: bus -1 (RP10)
acpiprt12 at acpi0: bus -1 (RP11)
acpiprt13 at acpi0: bus -1 (RP12)
acpiprt14 at acpi0: bus -1 (RP13)
acpiprt15 at acpi0: bus -1 (RP14)
acpiprt16 at acpi0: bus -1 (RP15)
acpiprt17 at acpi0: bus -1 (RP16)
acpiprt18 at acpi0: bus -1 (RP17)
acpiprt19 at acpi0: bus -1 (RP18)
acpiprt20 at acpi0: bus -1 (RP19)
acpiprt21 at acpi0: bus -1 (RP20)
acpiprt22 at acpi0: bus -1 (RP21)
acpiprt23 at acpi0: bus -1 (RP22)
acpiprt24 at acpi0: bus -1 (RP23)
acpiprt25 at acpi0: bus -1 (RP24)
acpiprt26 at acpi0: bus 8 (TRP0)
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
acpithinkpad0 at acpi0: version 2.0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "5B10X026" serial 3555 type LiP oem "SMP"
"PNP0C60" at acpi0 not configured
"LEN0111" at acpi0 not configured
"LEN0100" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"LEN0130" at acpi0 not configured
"LEN0071" at acpi0 not configured
"LEN2145" at acpi0 not configured
"ACPI000E" at acpi0 not configured
pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000
0xfd6a0000/0x10000 0xfd690000/0x10000 irq 14, 360 pins
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB(wakeup)
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn2 at acpi0: LID_(wakeup)
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INTC1040" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"USBC000" at acpi0 not configured
acpipwrres0 at acpi0: PUBS, resource for XHCI
acpipwrres1 at acpi0: V0PR
acpipwrres2 at acpi0: V1PR
acpipwrres3 at acpi0: V2PR
acpipwrres4 at acpi0: PXTC
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: TBT0, resource for TDM0, TRP0, TRP1
acpipwrres7 at acpi0: TBT1, resource for TDM1, TRP2, TRP3
acpipwrres8 at acpi0: D3C_, resource for TXHC, TDM0, TDM1, TRP0, TRP1, TRP2,
TRP3
acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpipwrres9 at acpi0: PIN_
acpipwrres10 at acpi0: PINP
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
acpivout1 at acpivideo0: DD2F
cpu0: Enhanced SpeedStep 4680 MHz: speeds: 2701, 2700, 2600, 2500, 2300, 2100,
1900, 1700, 1600, 1400, 1200, 1100, 900, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Core 11G Host" rev 0x01
inteldrm0 at pci0 dev 2 function 0 "Intel Xe Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, TIGERLAKE, gen 12
"Intel Core 11G DTT" rev 0x01 at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 6 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci1 at ppb0 bus 2
nvme0 at pci1 dev 0 function 0 "Samsung SM981/PM981" rev 0x00: msix, NVMe 1.3
nvme0: Samsung SSD 970 EVO Plus 2TB, firmware 2B2QEXM7, serial S4J4NM0W330551L
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 2B2Q>
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
ppb1 at pci0 dev 7 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci2 at ppb1 bus 8
ppb2 at pci2 dev 0 function 0 vendor "Intel", unknown product 0x15ef rev 0x06
pci3 at ppb2 bus 9
ppb3 at pci3 dev 2 function 0 vendor "Intel", unknown product 0x15ef rev 0x06:
msi
pci4 at ppb3 bus 10
xhci0 at pci4 dev 0 function 0 vendor "Intel", unknown product 0x15f0 rev 0x06:
msi, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
ppb4 at pci3 dev 4 function 0 vendor "Intel", unknown product 0x15ef rev 0x06:
msi
pci5 at ppb4 bus 11
"Intel Core 11G SRAM" rev 0x01 at pci0 dev 10 function 0 not configured
xhci1 at pci0 dev 13 function 0 "Intel Core 11G xHCI" rev 0x01: msi, xHCI 1.20
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 2 not configured
xhci2 at pci0 dev 20 function 0 "Intel 500 Series xHCI" rev 0x20: msi, xHCI 1.20
usb2 at xhci2: USB revision 3.0
uhub2 at usb2 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 500 Series Shared SRAM" rev 0x20 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 21 function 2 "Intel 500 Series I2C" rev 0x20: apic 2 int 29
iic1 at dwiic1
"Intel 500 Series HECI" rev 0x20 at pci0 dev 22 function 0 not configured
ppb5 at pci0 dev 28 function 0 "Intel 500 Series PCIE" rev 0x20
pci6 at ppb5 bus 3
ppb6 at pci0 dev 28 function 2 "Intel 500 Series PCIE" rev 0x20: msi
pci7 at ppb6 bus 4
re0 at pci7 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400),
msi, address 8c:8c:aa:64:9e:63
rgephy0 at re0 phy 7: RTL8251, rev. 0
ppb7 at pci0 dev 29 function 0 "Intel 500 Series PCIE" rev 0x20: msi
pci8 at ppb7 bus 7
nvme1 at pci8 dev 0 function 0 "Samsung SM981/PM981" rev 0x00: msix, NVMe 1.3
nvme1: Samsung SSD 970 EVO Plus 2TB, firmware 2B2QEXM7, serial S4J4NM0W330548H
scsibus2 at nvme1: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <NVMe, Samsung SSD 970, 2B2Q>
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
pcib0 at pci0 dev 31 function 0 "Intel 500 Series eSPI" rev 0x20
azalia0 at pci0 dev 31 function 3 "Intel 500 Series HD Audio" rev 0x20: msi
azalia0: codecs: Realtek ALC257, Intel/0x2812, using Realtek ALC257
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 500 Series SMBus" rev 0x20: apic 2 int
16
iic2 at ichiic0
"Intel 500 Series SPI" rev 0x20 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Clickpad, version 4, firmware 0x6f3001
wsmouse1 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x27
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub3 at uhub0 port 2 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/51.53 addr 2
uhub4 at uhub3 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/51.33 addr 3
uhub5 at uhub4 port 1 configuration 1 interface 0 "Lenovo USB2.0 HUB" rev
2.00/60.52 addr 4
uaudio0 at uhub5 port 2 configuration 1 interface 1 "Lenovo ThinkPad
Thunderbolt 3 Dock USB Audio" rev 2.01/0.92 addr 5
uaudio0: class v1, full-speed, sync, channels: 2 play, 1 rec, 4 ctls
audio1 at uaudio0
uhidev0 at uhub5 port 2 configuration 1 interface 3 "Lenovo ThinkPad
Thunderbolt 3 Dock USB Audio" rev 2.01/0.92 addr 5
uhidev0: iclass 3/0, 16 report ids
ucc0 at uhidev0 reportid 1: 6 usages, 3 keys, enum
wskbd1 at ucc0 mux 1
uhid0 at uhidev0 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev0 reportid 3: input=0, output=2, feature=0
uhid2 at uhidev0 reportid 4: input=0, output=38, feature=0
uhid3 at uhidev0 reportid 5: input=34, output=0, feature=0
uhid4 at uhidev0 reportid 6: input=0, output=36, feature=0
uhid5 at uhidev0 reportid 7: input=32, output=0, feature=0
uhid6 at uhidev0 reportid 16: input=2, output=0, feature=0
uaudio1 at uhub4 port 3 configuration 1 interface 1 "BEHRINGER UMC204HD 192k"
rev 2.00/1.12 addr 6
uaudio1: class v2, high-speed, async, channels: 4 play, 2 rec, 12 ctls
audio2 at uaudio1
umidi0 at uhub4 port 3 configuration 1 interface 4 "BEHRINGER UMC204HD 192k"
rev 2.00/1.12 addr 6
umidi0: (genuine USB-MIDI)
umidi0: out=1, in=1
midi0 at umidi0: <USB MIDI I/F>
ugen0 at uhub4 port 3 configuration 1 "BEHRINGER UMC204HD 192k" rev 2.00/1.12
addr 6
uhub3: device problem, disabling port 3
ugen1 at uhub3 port 5 "VIA Labs, Inc. 40AN" rev 2.01/10.30 addr 7
uhub6 at uhub0 port 4 configuration 1 interface 0 "VIA Labs, Inc. USB3.1 Hub"
rev 3.10/51.53 addr 8
uhub7 at uhub6 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB3.1 Hub"
rev 3.10/51.33 addr 9
ure0 at uhub7 port 2 configuration 1 interface 0 "Realtek ThinkPad TBT 3 Dock"
rev 3.00/31.01 addr 10
ure0: RTL8153B (0x6010), address 08:3a:88:59:9a:18
rgephy1 at ure0 phy 0: RTL8251, rev. 0
umass0 at uhub6 port 2 configuration 1 interface 0 "Norelsys NS1081" rev
3.00/1.00 addr 11
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
probe(umass0:1:0): Check Condition (error 0) on opcode 0x0
probe(umass0:1:0): Check Condition (error 0) on opcode 0x0
sd2 at scsibus3 targ 1 lun 0: <NORELSYS, 1081CS0, > removable
sd3 at scsibus3 targ 1 lun 1: <NORELSYS, 1081CS1, > removable
sd3: 7580MB, 512 bytes/sector, 15523840 sectors
uhub8 at uhub2 port 5 configuration 1 interface 0 "GenesysLogic USB2.1 Hub" rev
2.10/76.33 addr 2
uhidev1 at uhub8 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.01 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd2 at ukbd0 mux 1
uhidev2 at uhub8 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.01 addr 3
uhidev2: iclass 3/1, 8 report ids
ums0 at uhidev2 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc1 at uhidev2 reportid 3: 652 usages, 20 keys, array
wskbd3 at ucc1 mux 1
uhid7 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid8 at uhidev2 reportid 8: input=1, output=0, feature=0
uhidev3 at uhub8 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.01 addr 3
uhidev3: iclass 3/0, 33 report ids
uhidpp0 at uhidev3 device 1 keyboard "K800", device 2 mouse "M510", device 3
mouse "MX Anywhere 2S"
uhid9 at uhidev3 reportid 32: input=14, output=14, feature=0
uhid10 at uhidev3 reportid 33: input=31, output=31, feature=0
uhidev4 at uhub8 port 4 configuration 1 interface 0 "MNT Research MNT Reform
Keyboard 4.0 US/ST" rev 2.00/1.00 addr 4
uhidev4: iclass 3/0, 5 report ids
ukbd1 at uhidev4 reportid 1: 8 variable keys, 6 key codes
wskbd4 at ukbd1 mux 1
ums1 at uhidev4 reportid 2: 5 buttons, Z and W dir
wsmouse3 at ums1 mux 0
uhid11 at uhidev4 reportid 5: input=0, output=0, feature=1
uhidev5 at uhub8 port 6 configuration 1 interface 0 "Prolific Technology Inc.
USB-I2C Controller" rev 2.00/2.05 addr 5
uhidev5: iclass 3/0, 163 report ids
uhid12 at uhidev5 reportid 128: input=0, output=0, feature=2
uhid13 at uhidev5 reportid 129: input=0, output=0, feature=1
uhid14 at uhidev5 reportid 130: input=0, output=0, feature=2
uhid15 at uhidev5 reportid 131: input=0, output=0, feature=1
uhid16 at uhidev5 reportid 132: input=0, output=0, feature=2
uhid17 at uhidev5 reportid 133: input=0, output=0, feature=1
uhid18 at uhidev5 reportid 134: input=0, output=0, feature=2
uhid19 at uhidev5 reportid 162: input=0, output=63, feature=0
uhid20 at uhidev5 reportid 163: input=63, output=63, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd4 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1C, 006>
sd4: 1907728MB, 512 bytes/sector, 3907027583 sectors
root on sd4a (cb52860e8ae25c1f.a) swap on sd4b dump on sd4b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
