bugs  

Messages by Thread

• • Re: RTEMS | cpukit/shell​​ supports using the tab key to auto-complete commands (!495) shuhua hua (@huangshuhua)
  • Re: RTEMS | cpukit/shell​​ supports using the tab key to auto-complete commands (!495) shuhua hua (@huangshuhua)
  • Re: RTEMS | cpukit/shell​​ supports using the tab key to auto-complete commands (!495) Amar Takhar (@amar)
  • Re: RTEMS | cpukit/shell​​ supports using the tab key to auto-complete commands (!495) shuhua hua (@huangshuhua)
• RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Joel Sherrill (@joel)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Joel Sherrill (@joel)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Heinz Junkes (@junkes)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Heinz Junkes (@junkes)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Heinz Junkes (@junkes)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Heinz Junkes (@junkes)
  • Re: RTEMS | bsps/raspberrypi: Specify an initial baud rate for libio to use during startup (!494) Gedare Bloom (@gedare)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Gedare Bloom (@gedare)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Amar Takhar (@amar)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Amar Takhar (@amar)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Amar Takhar (@amar)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Specify an initial baud rate during startup (!494) Kinsey Moore (@opticron)
• RTEMS | arm/raspberrypi: Serial port initialization is broken (#5256) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Serial port initialization is broken (#5256) Jacob Killelea (@jkillelea)
  • Re: RTEMS | arm/raspberrypi: Serial port initialization is broken (#5256) Kinsey Moore (@opticron)
• RTEMS Source Builder | Draft: Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Draft: Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Draft: Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Draft: Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Gedare Bloom (@gedare)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Update next to GCC 15.1.0 (!152) Kinsey Moore (@opticron)
• RTEMS Source Builder | Update GCC for "next" to 15.1.0 (#106) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update GCC for "next" to 15.1.0 (#106) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | Update GCC for "next" to 15.1.0 (#106) Kinsey Moore (@opticron)
• Google Summer of Code | tracking/2025/Bhavya_Shah.md Added link to blog page (!130) Bhavya Shah (@bhavyaBeliever)
  • Re: Google Summer of Code | tracking/2025/Bhavya_Shah.md Added link to blog page (!130) Bhavya Shah (@bhavyaBeliever)
  • Re: Google Summer of Code | tracking/2025/Bhavya_Shah.md Added link to blog page (!130) Gedare Bloom (@gedare)
• RTEMS | Make the SPARC G6 global reg access an inline function (#5255) Chris Johns (@chris)
• RTEMS | Build all BSPs with -k with errors (!493) Chris Johns (@chris)
  • Re: RTEMS | Build all BSPs with -k with errors (!493) Chris Johns (@chris)
  • Re: RTEMS | Build all BSPs with -k with errors (!493) Chris Johns (@chris)
  • Re: RTEMS | Build all BSPs with -k with errors (!493) Joel Sherrill (@joel)
  • Re: RTEMS | Build all BSPs with -k with errors (!493) Kinsey Moore (@opticron)
• RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!151) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!151) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!151) Chris Johns (@chris)
• RTEMS Source Builder | Backport QEMU version update to 6 branch (#105) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Backport QEMU version update to 5 branch (#105) Kinsey Moore (@opticron)
• RTEMS Source Builder | Backport QEMU version update to 6 branch (#104) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Backport QEMU version update to 6 branch (#104) Kinsey Moore (@opticron)
• RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!150) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!150) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | Draft: devel/qemu-5.2.0: Update to the non-RC version (!150) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!150) Chris Johns (@chris)
• RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!149) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!149) Kinsey Moore (@opticron)
  • Re: RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!149) Amar Takhar (@amar)
  • Re: RTEMS Source Builder | devel/qemu-5.2.0: Update to the non-RC version (!149) Amar Takhar (@amar)
• Re: RTEMS | Cannot obtain dates later than 2100 (!339) Chris Johns (@chris)
  • Re: RTEMS | Cannot obtain dates later than 2100 (!339) Amar Takhar (@amar)
• RTEMS | bsps/shared/dev/ide: Initalise ATA request links as off chain (!492) Chris Johns (@chris)
  • Re: RTEMS | bsps/shared/dev/ide: Initalise ATA request links as off chain (!492) Chris Johns (@chris)
  • Re: RTEMS | bsps/shared/dev/ide: Initalise ATA request links as off chain (!492) Kinsey Moore (@opticron)
• RTEMS | i386/pc BSP: Initalise ATA request links as off chain (!491) Chris Johns (@chris)
  • Re: RTEMS | i386/pc BSP: Initalise ATA request links as off chain (!491) Chris Johns (@chris)
  • Re: RTEMS | i386/pc BSP: Initalise ATA request links as off chain (!491) Kinsey Moore (@opticron)
  • Re: RTEMS | i386/pc BSP: Initalise ATA request links as off chain (!491) Kinsey Moore (@opticron)
• RTEMS | i38p/pc BSP ATA driver asserts with node errors on FAT disk mount (#5254) Chris Johns (@chris)
  • Re: RTEMS | i38p/pc BSP ATA driver asserts with node errors on FAT disk mount (#5254) Chris Johns (@chris)
  • Re: RTEMS | i386/pc BSP ATA driver asserts with node errors on FAT disk mount (#5254) Kinsey Moore (@opticron)
• RTEMS | i38p/pc BSP ATA driver asserts with node errors on FAT disk mount (#5253) Chris Johns (@chris)
  • Re: RTEMS | i38p/pc BSP ATA driver asserts with node errors on FAT disk mount (#5253) Chris Johns (@chris)
  • Re: RTEMS | i386/pc BSP ATA driver asserts with node errors on FAT disk mount (#5253) Kinsey Moore (@opticron)
• LibBSD | Socket close fails when using kqueue (#43) Aaron Nyholm (@eagleirony)
• LibBSD | Socket close fails when using kqueue (#42) Aaron Nyholm (@eagleirony)
• LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!71) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!71) Kinsey Moore (@opticron)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!71) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!71) Kinsey Moore (@opticron)
• LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!70) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!70) Kinsey Moore (@opticron)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!70) Kinsey Moore (@opticron)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!70) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!70) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!70) Kinsey Moore (@opticron)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!70) Kinsey Moore (@opticron)
• LibBSD | Socket close fails when using kqueue (#41) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | Socket close fails when using kqueue (#41) Kinsey Moore (@opticron)
• LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!69) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!69) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!69) Kinsey Moore (@opticron)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!69) Aaron Nyholm (@eagleirony)
  • Re: LibBSD | sys/kern/kern_event.c: Fix kqueue double hold (!69) Kinsey Moore (@opticron)
• RTEMS | waf exits too early when building all BSPs at once (#5252) Joel Sherrill (@joel)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Chris Johns (@chris)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Joel Sherrill (@joel)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Chris Johns (@chris)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Joel Sherrill (@joel)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Chris Johns (@chris)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Chris Johns (@chris)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Joel Sherrill (@joel)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Chris Johns (@chris)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Chris Johns (@chris)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Chris Johns (@chris)
  • Re: RTEMS | waf exits too early when building all BSPs at once (#5252) Kinsey Moore (@opticron)
• RTEMS Source Builder | rtems-default.bset: Update to GCC 14.3 (!148) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | rtems-default.bset: Update to GCC 14.3 (!148) Joel Sherrill (@joel)
  • Re: RTEMS Source Builder | rtems-default.bset: Update to GCC 14.3 (!148) Chris Johns (@chris)
  • Re: RTEMS Source Builder | rtems-default.bset: Update to GCC 14.3 (!148) Chris Johns (@chris)
  • Re: RTEMS Source Builder | rtems-default.bset: Update to GCC 14.3 (!148) Chris Johns (@chris)
• RTEMS | bsps/riscv: use lw to load _SMP_Processor_configured_maximum on rv64 (!490) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/riscv: use lw to load _SMP_Processor_configured_maximum on rv64 (!490) Kinsey Moore (@opticron)
  • Re: RTEMS | bsps/riscv: use lw to load _SMP_Processor_configured_maximum on rv64 (!490) Chris Johns (@chris)
• RTEMS | RISC-V SMP start reads 64bits from a 32bit symbol (#5251) Lucian Silistru (@lsilistr)
  • Re: RTEMS | RISC-V SMP start reads 64bits from a 32bit symbol (#5251) Chris Johns (@chris)
• RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Gedare Bloom (@gedare)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Gedare Bloom (@gedare)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Gedare Bloom (@gedare)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Joel Sherrill (@joel)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Gedare Bloom (@gedare)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Gedare Bloom (@gedare)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Sebastian Huber (@sebhub)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot under its configuration define (!489) Gedare Bloom (@gedare)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Lucian Silistru (@lsilistr)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Sebastian Huber (@sebhub)
  • Re: RTEMS | bsps/shared/irq: move record interrupt get_dispatch_table_slot to conf (!489) Sebastian Huber (@sebhub)
• RTEMS | sparc/include/.../cpuimpl.h: Correct global file scope register use (!488) Joel Sherrill (@joel)
  • Re: RTEMS | sparc/include/.../cpuimpl.h: Correct global file scope register use (!488) Joel Sherrill (@joel)
  • Re: RTEMS | sparc/include/.../cpuimpl.h: Correct global file scope register use (!488) Kinsey Moore (@opticron)
  • Re: RTEMS | sparc/include/.../cpuimpl.h: Correct global file scope register use (!488) Chris Johns (@chris)
  • Re: RTEMS | sparc/include/.../cpuimpl.h: Correct global file scope register use (!488) Chris Johns (@chris)
• RTEMS Source Builder | rtems: Update package git references (!147) Chris Johns (@chris)
  • Re: RTEMS Source Builder | rtems: Update package git references (!147) Chris Johns (@chris)
  • Re: RTEMS Source Builder | rtems: Update package git references (!147) Kinsey Moore (@opticron)
• RTEMS Source Builder | Update package git references to allow testing (!146) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Update package git references to allow testing (!146) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Update package git references to allow testing (!146) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Update package git references to allow testing (!146) Chris Johns (@chris)
• RTEMS Source Builder | Update git package regerences for 6 (#103) Chris Johns (@chris)
  • Re: RTEMS Source Builder | Update git package regerences for 6 (#103) Kinsey Moore (@opticron)
• Network Services | bsd/ntpd: Add ntpd sys var query and sync status calls (!29) Chris Johns (@chris)
  • Re: Network Services | bsd/ntpd: Add ntpd sys var query and sync status calls (!29) Chris Johns (@chris)
  • Re: Network Services | bsd/ntpd: Add ntpd sys var query and sync status calls (!29) Kinsey Moore (@opticron)
• RTEMS | Draft: Resolve "spstdc17 SPARC warning for use of" (!487) Joel Sherrill (@joel)
  • Re: RTEMS | Draft: Resolve "spstdc17 SPARC warning for use of" (!487) Joel Sherrill (@joel)
  • Re: RTEMS | Draft: Resolve "spstdc17 SPARC warning for use of" (!487) Amar Takhar (@amar)

• Earlier messages
• Later messages