The Buildbot has detected a new failure on builder aarch64 Fedora Rawhide LTO
3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/979/builds/1056
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: cstratak-fedora-rawhide-aarch64
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>, Nikita Sobolev
<[email protected]>, Serhiy Storchaka <[email protected]>, Skip Montanaro
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 91, done.
remote: Counting objects: 1% (1/70)
remote: Counting objects: 2% (2/70)
remote: Counting objects: 4% (3/70)
remote: Counting objects: 5% (4/70)
remote: Counting objects: 7% (5/70)
remote: Counting objects: 8% (6/70)
remote: Counting objects: 10% (7/70)
remote: Counting objects: 11% (8/70)
remote: Counting objects: 12% (9/70)
remote: Counting objects: 14% (10/70)
remote: Counting objects: 15% (11/70)
remote: Counting objects: 17% (12/70)
remote: Counting objects: 18% (13/70)
remote: Counting objects: 20% (14/70)
remote: Counting objects: 21% (15/70)
remote: Counting objects: 22% (16/70)
remote: Counting objects: 24% (17/70)
remote: Counting objects: 25% (18/70)
remote: Counting objects: 27% (19/70)
remote: Counting objects: 28% (20/70)
remote: Counting objects: 30% (21/70)
remote: Counting objects: 31% (22/70)
remote: Counting objects: 32% (23/70)
remote: Counting objects: 34% (24/70)
remote: Counting objects: 35% (25/70)
remote: Counting objects: 37% (26/70)
remote: Counting objects: 38% (27/70)
remote: Counting objects: 40% (28/70)
remote: Counting objects: 41% (29/70)
remote: Counting objects: 42% (30/70)
remote: Counting objects: 44% (31/70)
remote: Counting objects: 45% (32/70)
remote: Counting objects: 47% (33/70)
remote: Counting objects: 48% (34/70)
remote: Counting objects: 50% (35/70)
remote: Counting objects: 51% (36/70)
remote: Counting objects: 52% (37/70)
remote: Counting objects: 54% (38/70)
remote: Counting objects: 55% (39/70)
remote: Counting objects: 57% (40/70)
remote: Counting objects: 58% (41/70)
remote: Counting objects: 60% (42/70)
remote: Counting objects: 61% (43/70)
remote: Counting objects: 62% (44/70)
remote: Counting objects: 64% (45/70)
remote: Counting objects: 65% (46/70)
remote: Counting objects: 67% (47/70)
remote: Counting objects: 68% (48/70)
remote: Counting objects: 70% (49/70)
remote: Counting objects: 71% (50/70)
remote: Counting objects: 72% (51/70)
remote: Counting objects: 74% (52/70)
remote: Counting objects: 75% (53/70)
remote: Counting objects: 77% (54/70)
remote: Counting objects: 78% (55/70)
remote: Counting objects: 80% (56/70)
remote: Counting objects: 81% (57/70)
remote: Counting objects: 82% (58/70)
remote: Counting objects: 84% (59/70)
remote: Counting objects: 85% (60/70)
remote: Counting objects: 87% (61/70)
remote: Counting objects: 88% (62/70)
remote: Counting objects: 90% (63/70)
remote: Counting objects: 91% (64/70)
remote: Counting objects: 92% (65/70)
remote: Counting objects: 94% (66/70)
remote: Counting objects: 95% (67/70)
remote: Counting objects: 97% (68/70)
remote: Counting objects: 98% (69/70)
remote: Counting objects: 100% (70/70)
remote: Counting objects: 100% (70/70), done.
remote: Compressing objects: 2% (1/39)
remote: Compressing objects: 5% (2/39)
remote: Compressing objects: 7% (3/39)
remote: Compressing objects: 10% (4/39)
remote: Compressing objects: 12% (5/39)
remote: Compressing objects: 15% (6/39)
remote: Compressing objects: 17% (7/39)
remote: Compressing objects: 20% (8/39)
remote: Compressing objects: 23% (9/39)
remote: Compressing objects: 25% (10/39)
remote: Compressing objects: 28% (11/39)
remote: Compressing objects: 30% (12/39)
remote: Compressing objects: 33% (13/39)
remote: Compressing objects: 35% (14/39)
remote: Compressing objects: 38% (15/39)
remote: Compressing objects: 41% (16/39)
remote: Compressing objects: 43% (17/39)
remote: Compressing objects: 46% (18/39)
remote: Compressing objects: 48% (19/39)
remote: Compressing objects: 51% (20/39)
remote: Compressing objects: 53% (21/39)
remote: Compressing objects: 56% (22/39)
remote: Compressing objects: 58% (23/39)
remote: Compressing objects: 61% (24/39)
remote: Compressing objects: 64% (25/39)
remote: Compressing objects: 66% (26/39)
remote: Compressing objects: 69% (27/39)
remote: Compressing objects: 71% (28/39)
remote: Compressing objects: 74% (29/39)
remote: Compressing objects: 76% (30/39)
remote: Compressing objects: 79% (31/39)
remote: Compressing objects: 82% (32/39)
remote: Compressing objects: 84% (33/39)
remote: Compressing objects: 87% (34/39)
remote: Compressing objects: 89% (35/39)
remote: Compressing objects: 92% (36/39)
remote: Compressing objects: 94% (37/39)
remote: Compressing objects: 97% (38/39)
remote: Compressing objects: 100% (39/39)
remote: Compressing objects: 100% (39/39), done.
remote: Total 91 (delta 41), reused 43 (delta 31), pack-reused 21
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to '562fe5f5d411a9562f60313f71b924520a60eb9e'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 562fe5f5d4 [3.11] gh-115059: Remove debugging code in test_io
(GH-115240) (GH-115245)
Switched to and reset branch '3.11'
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
Kill <WorkerThread #4 running test=test_posix pid=3625267 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #4 running test=test_posix
pid=3625267 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1564595582, "json_file": {"file": 29, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 3625267 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=3648888 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=3648888 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1564595582, "json_file": {"file": 4, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 3648888 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
make: *** [Makefile:1852: buildbottest] Error 2
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora
Rawhide LTO + PGO 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/939/builds/1125
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: cstratak-fedora-rawhide-aarch64
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>, Nikita Sobolev
<[email protected]>, Serhiy Storchaka <[email protected]>, Skip Montanaro
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 87, done.
remote: Counting objects: 1% (1/66)
remote: Counting objects: 3% (2/66)
remote: Counting objects: 4% (3/66)
remote: Counting objects: 6% (4/66)
remote: Counting objects: 7% (5/66)
remote: Counting objects: 9% (6/66)
remote: Counting objects: 10% (7/66)
remote: Counting objects: 12% (8/66)
remote: Counting objects: 13% (9/66)
remote: Counting objects: 15% (10/66)
remote: Counting objects: 16% (11/66)
remote: Counting objects: 18% (12/66)
remote: Counting objects: 19% (13/66)
remote: Counting objects: 21% (14/66)
remote: Counting objects: 22% (15/66)
remote: Counting objects: 24% (16/66)
remote: Counting objects: 25% (17/66)
remote: Counting objects: 27% (18/66)
remote: Counting objects: 28% (19/66)
remote: Counting objects: 30% (20/66)
remote: Counting objects: 31% (21/66)
remote: Counting objects: 33% (22/66)
remote: Counting objects: 34% (23/66)
remote: Counting objects: 36% (24/66)
remote: Counting objects: 37% (25/66)
remote: Counting objects: 39% (26/66)
remote: Counting objects: 40% (27/66)
remote: Counting objects: 42% (28/66)
remote: Counting objects: 43% (29/66)
remote: Counting objects: 45% (30/66)
remote: Counting objects: 46% (31/66)
remote: Counting objects: 48% (32/66)
remote: Counting objects: 50% (33/66)
remote: Counting objects: 51% (34/66)
remote: Counting objects: 53% (35/66)
remote: Counting objects: 54% (36/66)
remote: Counting objects: 56% (37/66)
remote: Counting objects: 57% (38/66)
remote: Counting objects: 59% (39/66)
remote: Counting objects: 60% (40/66)
remote: Counting objects: 62% (41/66)
remote: Counting objects: 63% (42/66)
remote: Counting objects: 65% (43/66)
remote: Counting objects: 66% (44/66)
remote: Counting objects: 68% (45/66)
remote: Counting objects: 69% (46/66)
remote: Counting objects: 71% (47/66)
remote: Counting objects: 72% (48/66)
remote: Counting objects: 74% (49/66)
remote: Counting objects: 75% (50/66)
remote: Counting objects: 77% (51/66)
remote: Counting objects: 78% (52/66)
remote: Counting objects: 80% (53/66)
remote: Counting objects: 81% (54/66)
remote: Counting objects: 83% (55/66)
remote: Counting objects: 84% (56/66)
remote: Counting objects: 86% (57/66)
remote: Counting objects: 87% (58/66)
remote: Counting objects: 89% (59/66)
remote: Counting objects: 90% (60/66)
remote: Counting objects: 92% (61/66)
remote: Counting objects: 93% (62/66)
remote: Counting objects: 95% (63/66)
remote: Counting objects: 96% (64/66)
remote: Counting objects: 98% (65/66)
remote: Counting objects: 100% (66/66)
remote: Counting objects: 100% (66/66), done.
remote: Compressing objects: 2% (1/36)
remote: Compressing objects: 5% (2/36)
remote: Compressing objects: 8% (3/36)
remote: Compressing objects: 11% (4/36)
remote: Compressing objects: 13% (5/36)
remote: Compressing objects: 16% (6/36)
remote: Compressing objects: 19% (7/36)
remote: Compressing objects: 22% (8/36)
remote: Compressing objects: 25% (9/36)
remote: Compressing objects: 27% (10/36)
remote: Compressing objects: 30% (11/36)
remote: Compressing objects: 33% (12/36)
remote: Compressing objects: 36% (13/36)
remote: Compressing objects: 38% (14/36)
remote: Compressing objects: 41% (15/36)
remote: Compressing objects: 44% (16/36)
remote: Compressing objects: 47% (17/36)
remote: Compressing objects: 50% (18/36)
remote: Compressing objects: 52% (19/36)
remote: Compressing objects: 55% (20/36)
remote: Compressing objects: 58% (21/36)
remote: Compressing objects: 61% (22/36)
remote: Compressing objects: 63% (23/36)
remote: Compressing objects: 66% (24/36)
remote: Compressing objects: 69% (25/36)
remote: Compressing objects: 72% (26/36)
remote: Compressing objects: 75% (27/36)
remote: Compressing objects: 77% (28/36)
remote: Compressing objects: 80% (29/36)
remote: Compressing objects: 83% (30/36)
remote: Compressing objects: 86% (31/36)
remote: Compressing objects: 88% (32/36)
remote: Compressing objects: 91% (33/36)
remote: Compressing objects: 94% (34/36)
remote: Compressing objects: 97% (35/36)
remote: Compressing objects: 100% (36/36)
remote: Compressing objects: 100% (36/36), done.
remote: Total 87 (delta 39), reused 41 (delta 30), pack-reused 21
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to '562fe5f5d411a9562f60313f71b924520a60eb9e'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 562fe5f5d4 [3.11] gh-115059: Remove debugging code in test_io
(GH-115240) (GH-115245)
Switched to and reset branch '3.11'
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:2606: clean-retain-profile] Error 1 (ignored)
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
In file included from Python/bltinmodule.c:6:
In function ‘_PyObject_VectorcallTstate’,
inlined from ‘_PyObject_VectorcallTstate’ at
./Include/internal/pycore_call.h:77:1,
inlined from ‘map_next’ at Python/bltinmodule.c:1371:14:
./Include/internal/pycore_call.h:90:16: warning: ‘small_stack’ may be used
uninitialized [-Wmaybe-uninitialized]
90 | return _PyObject_MakeTpCall(tstate, callable, args, nargs,
kwnames);
|
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./Include/abstract.h:866,
from ./Include/Python.h:100,
from Python/bltinmodule.c:3:
./Include/cpython/abstract.h: In function ‘map_next’:
./Include/cpython/abstract.h:47:24: note: by argument 3 of type ‘struct
PyObject * const *’ to ‘_PyObject_MakeTpCall’ declared here
47 | PyAPI_FUNC(PyObject *) _PyObject_MakeTpCall(
| ^~~~~~~~~~~~~~~~~~~~
Python/bltinmodule.c:1343:15: note: ‘small_stack’ declared here
1343 | PyObject *small_stack[_PY_FASTCALL_SMALL_STACK];
| ^~~~~~~~~~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
Kill <WorkerThread #31 running test=test_posix pid=3596351 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #31 running test=test_posix
pid=3596351 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto-pgo/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 4996015, "json_file": {"file": 78, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto-pgo/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 3596351 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=3609748 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=3609748 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto-pgo/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 4996015, "json_file": {"file": 4, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.lto-pgo/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 3609748 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
make: *** [Makefile:1852: buildbottest] Error 2
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora
Rawhide Clang Installed 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/1028/builds/1116
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: cstratak-fedora-rawhide-aarch64
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>, Nikita Sobolev
<[email protected]>, Serhiy Storchaka <[email protected]>, Skip Montanaro
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 87, done.
remote: Counting objects: 1% (1/66)
remote: Counting objects: 3% (2/66)
remote: Counting objects: 4% (3/66)
remote: Counting objects: 6% (4/66)
remote: Counting objects: 7% (5/66)
remote: Counting objects: 9% (6/66)
remote: Counting objects: 10% (7/66)
remote: Counting objects: 12% (8/66)
remote: Counting objects: 13% (9/66)
remote: Counting objects: 15% (10/66)
remote: Counting objects: 16% (11/66)
remote: Counting objects: 18% (12/66)
remote: Counting objects: 19% (13/66)
remote: Counting objects: 21% (14/66)
remote: Counting objects: 22% (15/66)
remote: Counting objects: 24% (16/66)
remote: Counting objects: 25% (17/66)
remote: Counting objects: 27% (18/66)
remote: Counting objects: 28% (19/66)
remote: Counting objects: 30% (20/66)
remote: Counting objects: 31% (21/66)
remote: Counting objects: 33% (22/66)
remote: Counting objects: 34% (23/66)
remote: Counting objects: 36% (24/66)
remote: Counting objects: 37% (25/66)
remote: Counting objects: 39% (26/66)
remote: Counting objects: 40% (27/66)
remote: Counting objects: 42% (28/66)
remote: Counting objects: 43% (29/66)
remote: Counting objects: 45% (30/66)
remote: Counting objects: 46% (31/66)
remote: Counting objects: 48% (32/66)
remote: Counting objects: 50% (33/66)
remote: Counting objects: 51% (34/66)
remote: Counting objects: 53% (35/66)
remote: Counting objects: 54% (36/66)
remote: Counting objects: 56% (37/66)
remote: Counting objects: 57% (38/66)
remote: Counting objects: 59% (39/66)
remote: Counting objects: 60% (40/66)
remote: Counting objects: 62% (41/66)
remote: Counting objects: 63% (42/66)
remote: Counting objects: 65% (43/66)
remote: Counting objects: 66% (44/66)
remote: Counting objects: 68% (45/66)
remote: Counting objects: 69% (46/66)
remote: Counting objects: 71% (47/66)
remote: Counting objects: 72% (48/66)
remote: Counting objects: 74% (49/66)
remote: Counting objects: 75% (50/66)
remote: Counting objects: 77% (51/66)
remote: Counting objects: 78% (52/66)
remote: Counting objects: 80% (53/66)
remote: Counting objects: 81% (54/66)
remote: Counting objects: 83% (55/66)
remote: Counting objects: 84% (56/66)
remote: Counting objects: 86% (57/66)
remote: Counting objects: 87% (58/66)
remote: Counting objects: 89% (59/66)
remote: Counting objects: 90% (60/66)
remote: Counting objects: 92% (61/66)
remote: Counting objects: 93% (62/66)
remote: Counting objects: 95% (63/66)
remote: Counting objects: 96% (64/66)
remote: Counting objects: 98% (65/66)
remote: Counting objects: 100% (66/66)
remote: Counting objects: 100% (66/66), done.
remote: Compressing objects: 2% (1/37)
remote: Compressing objects: 5% (2/37)
remote: Compressing objects: 8% (3/37)
remote: Compressing objects: 10% (4/37)
remote: Compressing objects: 13% (5/37)
remote: Compressing objects: 16% (6/37)
remote: Compressing objects: 18% (7/37)
remote: Compressing objects: 21% (8/37)
remote: Compressing objects: 24% (9/37)
remote: Compressing objects: 27% (10/37)
remote: Compressing objects: 29% (11/37)
remote: Compressing objects: 32% (12/37)
remote: Compressing objects: 35% (13/37)
remote: Compressing objects: 37% (14/37)
remote: Compressing objects: 40% (15/37)
remote: Compressing objects: 43% (16/37)
remote: Compressing objects: 45% (17/37)
remote: Compressing objects: 48% (18/37)
remote: Compressing objects: 51% (19/37)
remote: Compressing objects: 54% (20/37)
remote: Compressing objects: 56% (21/37)
remote: Compressing objects: 59% (22/37)
remote: Compressing objects: 62% (23/37)
remote: Compressing objects: 64% (24/37)
remote: Compressing objects: 67% (25/37)
remote: Compressing objects: 70% (26/37)
remote: Compressing objects: 72% (27/37)
remote: Compressing objects: 75% (28/37)
remote: Compressing objects: 78% (29/37)
remote: Compressing objects: 81% (30/37)
remote: Compressing objects: 83% (31/37)
remote: Compressing objects: 86% (32/37)
remote: Compressing objects: 89% (33/37)
remote: Compressing objects: 91% (34/37)
remote: Compressing objects: 94% (35/37)
remote: Compressing objects: 97% (36/37)
remote: Compressing objects: 100% (37/37)
remote: Compressing objects: 100% (37/37), done.
remote: Total 87 (delta 39), reused 40 (delta 29), pack-reused 21
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to '562fe5f5d411a9562f60313f71b924520a60eb9e'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 562fe5f5d4 [3.11] gh-115059: Remove debugging code in test_io
(GH-115240) (GH-115245)
Switched to and reset branch '3.11'
./Modules/timemodule.c:151:13: warning: code will never be executed
[-Wunreachable-code]
151 | PyErr_SetString(PyExc_OverflowError,
| ^~~~~~~~~~~~~~~
1 warning generated.
./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed
[-Wunreachable-code]
3116 | parser->m_characterDataHandler(parser->m_handlerArg,
parser->m_dataBuf,
| ^~~~~~
./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark
code as explicitly dead
3115 | else if (0 && parser->m_characterDataHandler)
| ^
| /* DISABLES CODE */ ( )
./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed
[-Wunreachable-code]
4059 | parser->m_characterDataHandler(parser->m_handlerArg,
parser->m_dataBuf,
| ^~~~~~
./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark
code as explicitly dead
4058 | else if (0 && parser->m_characterDataHandler)
| ^
| /* DISABLES CODE */ ( )
2 warnings generated.
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_sysconfigdata__linux_aarch64-linux-gnu.py
to 644
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/__pycache__/_sysconfigdata__linux_aarch64-linux-gnu.cpython-311.pyc
to 644
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_contextvars.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/grp.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_opcode.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_statistics.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/spwd.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/fcntl.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/syslog.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_heapq.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_random.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_typing.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_testimportmultiple.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_crypt.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_testmultiphase.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_curses_panel.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_lsprof.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_sha1.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_testinternalcapi.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/cmath.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_zoneinfo.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_dbm.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_queue.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/mmap.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_xxtestfuzz.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_asyncio.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/select.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_posixsubprocess.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/array.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/readline.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_bisect.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_hashlib.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_md5.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/termios.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/resource.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_sha3.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_struct.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_gdbm.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_sha256.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_csv.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_blake2.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/nis.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_bz2.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/ossaudiodev.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_json.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/audioop.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/binascii.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_tw.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_posixshmem.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_uuid.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_testbuffer.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_kr.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/xxlimited_35.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/zlib.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/xxlimited.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_ctypes_test.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_lzma.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_sha512.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_hk.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_multiprocessing.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_iso2022.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_cn.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_testclinic.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_socket.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_multibytecodec.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_jp.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_xxsubinterpreters.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/pyexpat.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_tkinter.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_curses.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/unicodedata.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_datetime.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_elementtree.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/math.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_pickle.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_ssl.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_sqlite3.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_ctypes.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_testcapi.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/_decimal.cpython-311-aarch64-linux-gnu.so
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/
to 755
changing mode of
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/lib-dynload/__pycache__
to 755
WARNING: The scripts pip3 and pip3.11 are installed in
'/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/bin'
which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this
warning, use --no-warn-script-location.
Kill <WorkerThread #17 running test=test_posix pid=3558088 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #17 running test=test_posix
pid=3558088 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/bin/python3.11',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": false, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": false, "memory_limit": null, "gc_threshold": null,
"use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu",
"subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize":
true, "random_seed": 366046485, "json_file": {"file": 41, "file_type":
"UNIX_FD"}, "__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/subprocess.py:1127:
ResourceWarning: subprocess 3558088 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=3572462 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=3572462 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/bin/python3.11',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": false, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": false, "memory_limit": null, "gc_threshold": null,
"use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu",
"subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize":
true, "random_seed": 366046485, "json_file": {"file": 4, "file_type":
"UNIX_FD"}, "__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang-installed/build/target/lib/python3.11/subprocess.py:1127:
ResourceWarning: subprocess 3572462 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora
Rawhide Clang 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/1032/builds/1116
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: cstratak-fedora-rawhide-aarch64
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>, Nikita Sobolev
<[email protected]>, Serhiy Storchaka <[email protected]>, Skip Montanaro
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 87, done.
remote: Counting objects: 1% (1/66)
remote: Counting objects: 3% (2/66)
remote: Counting objects: 4% (3/66)
remote: Counting objects: 6% (4/66)
remote: Counting objects: 7% (5/66)
remote: Counting objects: 9% (6/66)
remote: Counting objects: 10% (7/66)
remote: Counting objects: 12% (8/66)
remote: Counting objects: 13% (9/66)
remote: Counting objects: 15% (10/66)
remote: Counting objects: 16% (11/66)
remote: Counting objects: 18% (12/66)
remote: Counting objects: 19% (13/66)
remote: Counting objects: 21% (14/66)
remote: Counting objects: 22% (15/66)
remote: Counting objects: 24% (16/66)
remote: Counting objects: 25% (17/66)
remote: Counting objects: 27% (18/66)
remote: Counting objects: 28% (19/66)
remote: Counting objects: 30% (20/66)
remote: Counting objects: 31% (21/66)
remote: Counting objects: 33% (22/66)
remote: Counting objects: 34% (23/66)
remote: Counting objects: 36% (24/66)
remote: Counting objects: 37% (25/66)
remote: Counting objects: 39% (26/66)
remote: Counting objects: 40% (27/66)
remote: Counting objects: 42% (28/66)
remote: Counting objects: 43% (29/66)
remote: Counting objects: 45% (30/66)
remote: Counting objects: 46% (31/66)
remote: Counting objects: 48% (32/66)
remote: Counting objects: 50% (33/66)
remote: Counting objects: 51% (34/66)
remote: Counting objects: 53% (35/66)
remote: Counting objects: 54% (36/66)
remote: Counting objects: 56% (37/66)
remote: Counting objects: 57% (38/66)
remote: Counting objects: 59% (39/66)
remote: Counting objects: 60% (40/66)
remote: Counting objects: 62% (41/66)
remote: Counting objects: 63% (42/66)
remote: Counting objects: 65% (43/66)
remote: Counting objects: 66% (44/66)
remote: Counting objects: 68% (45/66)
remote: Counting objects: 69% (46/66)
remote: Counting objects: 71% (47/66)
remote: Counting objects: 72% (48/66)
remote: Counting objects: 74% (49/66)
remote: Counting objects: 75% (50/66)
remote: Counting objects: 77% (51/66)
remote: Counting objects: 78% (52/66)
remote: Counting objects: 80% (53/66)
remote: Counting objects: 81% (54/66)
remote: Counting objects: 83% (55/66)
remote: Counting objects: 84% (56/66)
remote: Counting objects: 86% (57/66)
remote: Counting objects: 87% (58/66)
remote: Counting objects: 89% (59/66)
remote: Counting objects: 90% (60/66)
remote: Counting objects: 92% (61/66)
remote: Counting objects: 93% (62/66)
remote: Counting objects: 95% (63/66)
remote: Counting objects: 96% (64/66)
remote: Counting objects: 98% (65/66)
remote: Counting objects: 100% (66/66)
remote: Counting objects: 100% (66/66), done.
remote: Compressing objects: 2% (1/36)
remote: Compressing objects: 5% (2/36)
remote: Compressing objects: 8% (3/36)
remote: Compressing objects: 11% (4/36)
remote: Compressing objects: 13% (5/36)
remote: Compressing objects: 16% (6/36)
remote: Compressing objects: 19% (7/36)
remote: Compressing objects: 22% (8/36)
remote: Compressing objects: 25% (9/36)
remote: Compressing objects: 27% (10/36)
remote: Compressing objects: 30% (11/36)
remote: Compressing objects: 33% (12/36)
remote: Compressing objects: 36% (13/36)
remote: Compressing objects: 38% (14/36)
remote: Compressing objects: 41% (15/36)
remote: Compressing objects: 44% (16/36)
remote: Compressing objects: 47% (17/36)
remote: Compressing objects: 50% (18/36)
remote: Compressing objects: 52% (19/36)
remote: Compressing objects: 55% (20/36)
remote: Compressing objects: 58% (21/36)
remote: Compressing objects: 61% (22/36)
remote: Compressing objects: 63% (23/36)
remote: Compressing objects: 66% (24/36)
remote: Compressing objects: 69% (25/36)
remote: Compressing objects: 72% (26/36)
remote: Compressing objects: 75% (27/36)
remote: Compressing objects: 77% (28/36)
remote: Compressing objects: 80% (29/36)
remote: Compressing objects: 83% (30/36)
remote: Compressing objects: 86% (31/36)
remote: Compressing objects: 88% (32/36)
remote: Compressing objects: 91% (33/36)
remote: Compressing objects: 94% (34/36)
remote: Compressing objects: 97% (35/36)
remote: Compressing objects: 100% (36/36)
remote: Compressing objects: 100% (36/36), done.
remote: Total 87 (delta 39), reused 41 (delta 30), pack-reused 21
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to '562fe5f5d411a9562f60313f71b924520a60eb9e'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 562fe5f5d4 [3.11] gh-115059: Remove debugging code in test_io
(GH-115240) (GH-115245)
Switched to and reset branch '3.11'
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
Kill <WorkerThread #25 running test=test_posix pid=3516404 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #25 running test=test_posix
pid=3516404 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 3686374069, "json_file": {"file": 34, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 3516404 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=3544779 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=3544779 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 3686374069, "json_file": {"file": 4, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/buildbot/buildarea/3.11.cstratak-fedora-rawhide-aarch64.clang/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 3544779 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
make: *** [Makefile:1852: buildbottest] Error 2
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The Buildbot
_______________________________________________
Buildbot-status mailing list -- [email protected]
To unsubscribe send an email to [email protected]
https://mail.python.org/mailman3/lists/buildbot-status.python.org/
Member address: [email protected]
