The nvidia driver is tried to get loaded after the card is turned off. Can you try to prevent the nvidia driver from automatically loading? I.e. boot with the modprobe.blacklist=nvidia-current,nvidia option.
Lekensteyn On Sun, Mar 4, 2012 at 1:31 AM, Nizar Sallem <[email protected]>wrote: > *Distro*: Ubuntu 11.10 > *Kernel*: Linux hannibal 3.0.0-16-generic #28-Ubuntu SMP Fri Jan 27 > 17:44:39 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > *Manufacturer and model*: > baseboard-manufacturer: Sony Corporation > baseboard-product-name: VAIO > baseboard-version : N/A > system-manufacturer : Sony Corporation > system-product-name : VPCZ12C5E > system-version : J00497VE > bios-vendor : INSYDE > bios-version : R3031C3 > bios-release-date : 10/04/2011 > *Bumblebee version*: 3.0 > > I have a nvidia 330M and installed bumblebee from the ubuntu repository > and when tried optirun glxspheres the output was as follow: > > $ optirun glxspheres > [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed > to initialize the NVIDIA GPU at PCI:1:0:0. Please > > [ERROR]Aborting because fallback start is disabled. > > Followed the instructions in troubleshooting and blacklisted nouveau > driver (I want nvidia driver) so I get this: > > $ lsmod | grep nvidia > nvidia 11713772 0 > > I looked into kern.log and have the following issues: > > Mar 3 16:17:25 hannibal kernel: [ 486.679022] bbswitch: enabling > discrete graphics > Mar 3 16:17:25 hannibal kernel: [ 486.822118] bbswitch: Result of _DSM > call for ON: 00000001 > Mar 3 16:17:25 hannibal kernel: [ 486.822141] pci 0000:01:00.0: power > state changed by ACPI to D0 > Mar 3 16:17:25 hannibal kernel: [ 486.822145] pci 0000:01:00.0: power > state changed by ACPI to D0 > Mar 3 16:17:25 hannibal kernel: [ 486.822162] pci 0000:01:00.0: > restoring config space at offset 0xf (was 0x100, writing 0x105) > Mar 3 16:17:25 hannibal kernel: [ 486.822170] pci 0000:01:00.0: > restoring config space at offset 0xc (was 0x0, writing 0xfff80000) > Mar 3 16:17:25 hannibal kernel: [ 486.822175] pci 0000:01:00.0: > restoring config space at offset 0x9 (was 0x1, writing 0x6001) > Mar 3 16:17:25 hannibal kernel: [ 486.822179] pci 0000:01:00.0: > restoring config space at offset 0x7 (was 0xc, writing 0xb000000c) > Mar 3 16:17:25 hannibal kernel: [ 486.822183] pci 0000:01:00.0: > restoring config space at offset 0x5 (was 0xc, writing 0xa000000c) > Mar 3 16:17:25 hannibal kernel: [ 486.822186] pci 0000:01:00.0: > restoring config space at offset 0x4 (was 0x0, writing 0xd0000000) > Mar 3 16:17:25 hannibal kernel: [ 486.822189] pci 0000:01:00.0: > restoring config space at offset 0x3 (was 0x800000, writing 0x800010) > Mar 3 16:17:25 hannibal kernel: [ 486.822203] pci 0000:01:00.0: power > state changed by ACPI to D0 > Mar 3 16:17:25 hannibal kernel: [ 486.822205] pci 0000:01:00.0: power > state changed by ACPI to D0 > Mar 3 16:17:25 hannibal kernel: [ 486.822209] pci 0000:01:00.0: enabling > device (0000 -> 0003) > Mar 3 16:17:25 hannibal kernel: [ 486.822216] pci 0000:01:00.0: PCI INT > A -> GSI 16 (level, low) -> IRQ 16 > Mar 3 16:17:25 hannibal kernel: [ 486.822221] pci 0000:01:00.0: setting > latency timer to 64 > Mar 3 16:17:25 hannibal kernel: [ 487.157537] nvidia 0000:01:00.0: power > state changed by ACPI to D0 > Mar 3 16:17:25 hannibal kernel: [ 487.157541] nvidia 0000:01:00.0: power > state changed by ACPI to D0 > Mar 3 16:17:25 hannibal kernel: [ 487.157546] nvidia 0000:01:00.0: > enabling device (0000 -> 0003) > Mar 3 16:17:25 hannibal kernel: [ 487.157554] nvidia 0000:01:00.0: PCI > INT A -> GSI 16 (level, low) -> IRQ 16 > Mar 3 16:17:25 hannibal kernel: [ 487.157562] nvidia 0000:01:00.0: > setting latency timer to 64 > Mar 3 16:17:25 hannibal kernel: [ 487.157567] vgaarb: device changed > decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none > Mar 3 16:17:25 hannibal kernel: [ 487.157696] NVRM: loading NVIDIA UNIX > x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 > Mar 3 16:17:36 hannibal kernel: [ 498.441697] NVRM: failed to copy vbios > to system memory. > Mar 3 16:17:36 hannibal kernel: [ 498.442821] NVRM: RmInitAdapter > failed! (0x30:0xffffffff:859) > Mar 3 16:17:36 hannibal kernel: [ 498.442831] NVRM: rm_init_adapter(0) > failed > Mar 3 16:23:49 hannibal kernel: [ 869.972135] NVRM: failed to copy vbios > to system memory. > Mar 3 16:23:49 hannibal kernel: [ 869.973256] NVRM: RmInitAdapter > failed! (0x30:0xffffffff:859) > Mar 3 16:23:49 hannibal kernel: [ 869.973267] NVRM: rm_init_adapter(0) > failed > > I really have no clue on how I can solve it I hope you guys can help. > > Thanks in advance, > -- > Nizar > > > -- > Mailing list: https://launchpad.net/~bumblebee > Post to : [email protected] > Unsubscribe : https://launchpad.net/~bumblebee > More help : https://help.launchpad.net/ListHelp > >
-- Mailing list: https://launchpad.net/~bumblebee Post to : [email protected] Unsubscribe : https://launchpad.net/~bumblebee More help : https://help.launchpad.net/ListHelp
