> On Tue, Apr 10, 2007 at 08:07:19PM +0100, James Simmons wrote: > > > > I tracked it down to way ash was hanging at start up. It was setjmp. > >Looking into the problem was uClibc was set to USE_FPU. This caused a > >lookup. So I disabled USE_FPU in uClibc but I'm getting > > > >arm-linux-uclibc-ld: ERROR: > >/home/jsimmons/work/ems2/iabuild/root/ems2-boot-tools/lib/gcc/arm-linux-uclibc/3.4.3/libgcc.a(_dvmd_lnx.o) > > > >uses hardware FP, whereas ld-uClibc-0.9.27.so uses software FP > > > >I tried several options to build the toolchain but no luck. This is using > >gcc-3.4.3 with uClibc 0.9.27. Anyone know how to fix this? > > with http://buildroot.uclibc.org/ building a system for arm (with and > without FPU) works just fine for me. > I used gcc-4.2 (4.1.2 should do fine, too), binutils 2.17.50.0.14 (2.17 > may do, too) and uClibc from trunk (0.9.29.3 should work likewise)
I found the problem. FPE_FASTFPE is still avaliable in 2.6 config but the code has been removed. Now it works. _______________________________________________ busybox mailing list [EMAIL PROTECTED] http://busybox.net/cgi-bin/mailman/listinfo/busybox
