On Mon, 2007-06-18 at 15:51 +0200, Miroslaw Dach wrote: > Hi Mike, > > Thank you very much for your suggestions. > I came back to the telnetd issue once again and right now when I try to > connect to my ppc405 embedded system I get: > > Trying 129.128.107.50... > Connected to ml403-mirek.pss.uk (129.128.107.50). > Escape character is '^]'. > Connection closed by foreign host.
Can you show your /etc/inetd.conf file? (My sample below should be on one line. In the email it's wrapped / split but that's not correct.) Also, a "ps w" might be interesting to verify what's running. -Mike ------------------------- > >> Could somebody advice me how to start/configure TELNETTed daemon on > >my > >> power-pc embedded linux which uses busybox 1.4.2 . > > > >I do it via inetd on my ARM systems. Here are the relevant parts (eg: > >I'm only showing parts of these files for brevity): > > > >------- /etc/inittab ------- > >::sysinit:/bin/ash /etc/rc > > > >------- /etc/rc ------- > ># start the inetd daemon (for telnet logins) > >/sbin/inetd > > > >------- /etc/inetd.conf ------- > >23 stream tcp nowait root /sbin/telnetd telnetd -l > >/bin/login > > > >Assuming you have a working network interface (up, configured, etc.) and > >working binaries (init, ash, inetd, login, telnetd) this should work. > > > >You will need some kind of authentication database for login to be > >happy. > > > >HTH. > > > >-Mike > _______________________________________________ busybox mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/busybox
