DISPLAY is set with our Xserver not by busybox. Under normal circumstances there is no need to modify DISPLAY.
re, wh Jurrian Dubbeldam schrieb: > Hi all, > > I want to create a loginscript in which I make a few variables ready for > my Xserver. So I did some research and I found out I use an ash shell. > After reading the ash man page I found out if ash boots as interactive > login shell it reads /etc/profile and .profile. Also that it needs an > ENV variable. > > So I edited the /etc/profile and added the line "ENV=$HOME/.login" and > the line "export ENV". However when I login, the DISPLAY variable is > empty. > > So I posted on forums, but after two days no solution. Propably the > error is in my inittab: > > # cat /etc/inittab > ::sysinit:/etc/init.d/rcS > #tty2::respawn:/sbin/getty -L 38400 tty2 > #tty3::respawn:/sbin/getty -L 38400 tty3 > #tty4::respawn:/sbin/getty -L 38400 tty4 > #tty5::respawn:/sbin/getty -L 38400 tty5 > #tty6::respawn:/sbin/getty -L 38400 tty6 > ::respawn:/sbin/getty -L 115200 ttymxc0 vt100 > ::respawn:/bin/bash -sc /etc/profile > ::ctrlaltdel:/sbin/reboot > ::shutdown:/sbin/swapoff -a > ::shutdown:/bin/umount -a -r > ::restart:/sbin/init > > I think my error is in the respawn /bin/bash, since I am using an ash > shell. But I don't know what should substitute it, and perhaps the > problem is in somewhere else. > > If I need to add more code, please ask me, but I don't want to overload > my first email with to many script codes.. > > Thanks in advance, > > Jurrian Dubbeldam > > > _______________________________________________ > busybox mailing list > [email protected] > http://busybox.net/cgi-bin/mailman/listinfo/busybox > > > _______________________________________________ busybox mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/busybox
