On Mon, 04 Jul 2011 15:31:22 +0200, walter harms <[email protected]> wrote: >1. Check if stty -a says something like:
Here's what it says: root:~> stty -a speed 38400 baud; rows 52; columns 132; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke >2. do kill -2 <pid> so see if hush or something else eats signals Killing "ping" with -2 does stop it. Actually, CTRL+c works fine when connected through SSH, but doesn't when connected through the serial port. This is the first time I'm having this issue. Also, I don't know if it means anything, but I also notice that the keypad no longer works, while it was OK previously while still using Hush as the shell. Thank you. _______________________________________________ busybox mailing list [email protected] http://lists.busybox.net/mailman/listinfo/busybox
